The FS Pan Glide assembly attaches to the Accu Stand Pro FS Stand follow spot stand, or any pole that measures 35mm in diameter, and makes your follow spot or Ellipsoidal easy to pan back and forth so you don't get any jittering or shaking on stage.The Pan Glide assembly is a must for any professional stage application where pan smoothness is imperative. Specifications:Top Bolt Thread size: M10Bottom Pole Opening Depth: 39mmBottom Pole Opening Width: 35mm

The Pro FS Stand is a black lighting tripod stand for use with most follow spots and ellipsoidals. Compatible with ADJ’s FS Pan Glide.Made of aluminium and steel construction and is very stable. Sets up quickly and easily with tightening knobs. Collapses down and may be conveniently stored away. The height may be adjusted manually from 1 meter to 1.4 meter. The maximum weight capacity is 50 kg.

The ADJ FS600LED is a modern 60W LED Follow Spot. It features a bright 60W LED source, 8 colors, variable strobe speed and dimming capabilities. Additional features include: adjustable Iris, shutters for manual framing and 3-pin and 5-pin DMX protocol. This fixture stays cool and consumes only 60W of power.Specifications:- Pro Followspot with a 60W High Powered White LED souce- 8 Colors (White, Red, Blue, Green, Orange, Yellow, 3200K (Warm White) & Purple- 14º - 26º Beam angle- Typical Throw: 30 meter (14º) to 40 meter (26º)- LED Strobe Effect: on board control via slider- 0-100% dimming: on board control via slider- Manual focusing- Manual Iris- Manual Framing Shutters- Extruded Aluminum Case design- 3 and 5 Pin DMX- Fan Cooled- Hanging Bracket- Gel Frame Holder- Power Consumption: 60W maximum- Multi-voltage operation: AC 100-240V 50/60Hz (non switchable)

Operable in manual mode or via DMXDMX512 control possible via any commercial DMX controller (occupies 6 channels)Suitable for a projection area from 25 to 50 metersManual control via control panel with buttons and fadersDMX addressing via LED display and four operating buttonsColor wheel with 5 different, dichroic color filters and openStrobe effect with adjustable speed (1-20 flashes/sec.)Four correction filters: CTB, cyan, magenta, yellowSteplessly adjustable iris from 5-100%Dimmer for stepless adjustment of the light-output brightness between 0 % and 100 %Manual focusManual zoom (from 7° to 13°)Mounting bracket for installation on a standEquipped with 1 x 300 W LEDSwitch-mode power supply for operation between 100 and 240 voltsPower connection via P-Con socket and included power cableColor generation: Colour wheelPower supply: 100-240 V AC, 50/60 HzDMX control channels: 6DMX512 connection: 3-pin XLRFlash-rate: 1-20 HzLED type: 300 W WWNumber of LEDs: 1Color temperature: 3500 KBeam angle: 7-13°Dimensions (L x W x H): 770 x 270 x 290 mmWeight: 12 kgIP classification: IP20Power consumption: 440 WLamp type: LED lampBeam angle: 7 - 13 °

Stand for follow spot with crank blackMaterial: aluminumSections: 2Maximum height: 1.55 mMinimum height: 1.00 mMaximum load capacity: 35 kg Adapter: 28 mm (TV spigot system)Transport dimensions: 1.20 x 0.27 x 0.19 mBase area: D = 0.85 mWeight: 9 kg

Operable in manual mode or via DMXDMX512 control possible via any commercial DMX controller (occupies 5 channels)Suitable for a projection area from 50 to 120 metersManual control via control panel with buttons and fadersThe control panel can be removed to mount laterally for easier operation of the control board with control buttonsDMX addressing via LCD and four operating buttonsColor wheel with 7 different, dichroic color filters and openStrobe effect with adjustable speed (1-20 flashes/sec.)Three color correction filters for a warmer color temperatureSteplessly adjustable iris from 5-100%Dimmer for stepless adjustment of the light-output brightness between 0 % and 100 %Manual focusManual zoom (from 7° to 13°)Mounting bracket for installation on a standEquipped with 1 x 600 W LEDSwitch-mode power supply for operation between 100 and 240 voltsPower connection via P-Con socket and included power cableColor generation: Colour wheel*'Power supply: 100-240 V AC, 50/60 HzDMX control channels: 5DMX512 connection: 3-pin and 5-pin XLRFlash-rate: 1-20 HzLED type: 600 W CWNumber of LEDs: 1Color temperature: 7800 KBeam angle: 7-13°Dimensions (L x W x H): 1050 x 230 x 340 mmWeight: 19 kgIP classification: IP20Power consumption: 640 W

The FS3000LED is a powerful and feature-packed follow spot that is joining ADJ’s range of theatrical stage lighting fixtures. Powered by a potent 300W warm white COB LED engine with a CRI of 98, the unit generates a powerful spotlight ideal for tracking performers on concert and theatre stages. It features digital dimming, an adjustable beam angle of 12 ~ 44-degrees, an iris, manual focus and a GOBO slot. The fixture supports both DMX and IR remote control, with an intuitive touchscreen interface on the rear panel facilitating DMX addressing and mode selection. In addition, a convenient rotary brightness control on the back panel makes for easy manual control, while two large rear handles allow for comfortable manual positioning. Light Source:300W warm white C.O.B. (Chip On Board) LEDColor temperature:3000KCRI: 98Light Output: 41190 LUX @ 2M; 11060 @4M (12-degree), 4871 LUX @2M; 1306 LUX @4M (44-degree)Features:Beam angle: 12~44-degree manually adjustableColor touch screen display with selectable settingsManual Dimming Potentiometer Manual ZoomManual FocusManual IrisFan coolingHanging BracketCompatible with ADJ UC IR wireless remoteGOBO:GOBO holder with METAL GOBOGobo Dimensions: Outer 74.5mm; Inner: 65mm; Thickness: 2mmElectrical:Voltage:AC100V-240V/50Hz-60HzMaximum Power: 340WConnections:3-pin and 5-pin DMX data linkingLocking Power In/Out to daisy chain power (3 fixtures max at 110V, 5 fixtures max at 240V)USB Input for firmware updateDimensions & Weight:Dimensions (LxWxH): 33.5” x 12.25” x 7” / 850x310x180mmWeight: 26.5” / 12kg.