Peripheral Equipments
Here you will find devices, controllers for adjusting and setting the audio signal and other accessories
TOPSELLER
Topseller
Dbx ZC-BOB Passive 6-way break-out box for all ZC panels
€107.00*
Zones Controller- To the branching of RJ 45- Suitable for all DBX ZonePro models- Sends Volume- Source selection- Mute and fire alarmIf no serial cabling is possible, the break-out box can remedy the situation and switch to a star-shaped cabling at any point, the connection is also via CAT5 cable with RJ-45 plug.
delivery time 14 days
dbx Crossover 234XS Stereo 3-way
€259.00*
dbx 234 Xs Crossover XLR connectors40Hz high passphase reverse switch on all outputsx10 rangemode switches for mono 4-way or stereo 2-way/3-way operation internal powersupply 19" 1U
Immediately available or ready for collection
ART active Xdirect Di box
€59.00*
Active DI BoxFrequency range: 10 Hz –100kHzMax. output level: +6 dBu (battery powered) / +14 dBu (phantom powered)Max. input level: +4/+24/+44 dBuDynamic range: > 100 dBInput: Jack and XLR femaleInput impedance 470 OhmOutput: XLR maleOutput impedance
delivery time 14 days
Ground Loop Isolator
€9.40*
High Quality Ground Loop Isolator2x RCA plug male / 2 x RCA plug female, perfect for eliminating hum - and overtone signals, deletes disturbing noises of computers, laptops and DVD players, earthing loop isolator Size: cylinder 60x35mmTotal lenght of cable : 60cm
Immediately available or ready for collection
dbx AFS2 Feedback Eliminator
€489.00*
DBX AFS2 digital signal processor for feedback eliminationExtremely fast algorithm detects feedback and corrects them instantlyExtremely narrow notch filters remove a fraction of the frequency spectrumThus, changes of sound are so minimal that they are barely audible24 programmable filters per channelClear display of the set notch filters - 24 LEDs per channel2 operating modes - Fixed Mode and Live ModeUser-friendlyIt is operated via buttons and comfortable knobs Display of all settings on the LCD displayWizard function of AFS2 enables configuration in just a few stepsAlso fully manually adjustableIs connected to the general monitor or between mixer and amplifierIs it possible to grind also on the channel insert of the mixerThe 2 channels of stereo or AFS2 can be operated independentlyDimensions (HxTB): 4,45 x 14,92 x 48,26 cmWeight: 2.04 kg
Immediately available or ready for collection
dbx 231S graphic equaliser 2x 31-band
€229.00*
With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4" inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.Two 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of ±6 or ±12 dB 12dB per octave 50Hz low-cut filter Front panel bypass switch ±12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Internal Toroidal Transformer Frequency Repsonse of 50kHz Dynamic range of greater than 108dB
delivery time 14 days
ART DPDB dual passive direct BOX
€68.00*
736/5000Passive DI boxThe dPDB Passive DI Box has two high-quality DI boxes in a portable housing. It is used for balancing unsymmetrical signals e.g. from line instruments such as bass, guitar or keyboards. It converts the high-impedance signals of the instruments into low-impedance balanced signals, which are necessary for mixing consoles. The dPDB has a switchable input attenuation (0dB, -20dB, -40dB), a 50k Ohm instrument input, a 50k Ohm parallel link socket, a 600 Ohm XLR output and a switchable ground lift.Characteristics:• Frequency response: 10 Hz - 50 kHz +/- 0.5dB @ + 4dBu• Connectors: 600 Ohm XLR Output Jack• Ground Lift Switchable• Input Sensitivity: Switchable (0dB, -20dB, -40dB)
delivery time 14 days
ARTSplitMix4 Splitter/Mixer
€85.00*
Splitter / Mixer4-channel passive mixer4 stereo input channelsstereo output (all 6.3 mm jack connectors are stereo -tip, ting, sleeve)Dimensions: 47 x 117 x 104 mm
Immediately available or ready for collection
Linea Research ASC48 FIR Audio Controller
€1,990.00*
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.
delivery time 7 days
DBX Zonenmix-Matrix-Sytem, 12x In, 6x Out
€1,199.00*
Audio matrix with 12x single, 6x off and 2x mic / line inputs- Advanced Feedback Suppression (AFS).- Autowarmth.- Auto Gain Control.- Classic dbx compression.- Limiter.The dbx ZonePRO 1260 is a universal problem solution for flexible sound reinforcement concepts in the installation area. The matrix is based on a total of 12x mono inputs (symmetrical microphone / line, 16x unbalanced line / monosummed and digital S / PDIF) and 6x outputs (all symmetrical line ). The very powerful DSP processor provides EQ, routing, dynamics and delay for each channel. In addition, an integrated feedback suppressor can be assigned to the microphone inputs. Media controllers can access all parameters via the serial or Ethernet interface. A wide selection of wall panels (for installation in switch sockets) allows remote access to level, program or complete presets in the various zones.
delivery time 14 days
Dbx ZC3 4-way source selector switch, wall panel
€89.00*
A selector switch allows the ZC-3 to switch between the presets of the DR260.With the ZonePro series, the source selection or scene selection can be programmed, the connection is made via a CAT5 cable with RJ-45 connector.for DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box
delivery time 14 days
dbx 215 graphic equaliser 2x 15-band
€185.00*
The dbx® 2-Series Graphic Equalizers have been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls. The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, +/- 12dB input gain range, and switchable 50Hz/12dB octave low-cut filters, but also includes other thoughtful features. These features include: 20 mm faders; selectable +/-6dB or +/-12dB boost/cut range for precise gain adjustments; XLR, and 1/4" TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx® 2-Series has been pursued to make your job easier. Two 15-band, 2/3-octave Constant Q frequency bands Switchable boost/cut ranges of ±6 or ±12 dB 12dB per octave, 3dB down @ 50Hz low-cut filter Front panel bypass switch ±12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Internal Toroidal Transformer Frequency Repsonse of 50kHx Dynamic range of greater than 108dB
Immediately available or ready for collection
ART EQ355 Equalizer
€285.00*
2-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 2 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg
delivery time 14 days
Linea Research ASC48 FIR Audio Controller with Dante Card
€2,790.00*
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 and Dante™ / AES67 (option) inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 and Dante™ inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.
delivery time 7 days
ART PDB4 Four-Channel Passive Direct Box
€139.00*
ART PDB4 Four-Channel Passive Direct Box DetailsThe ART PDB4 Four-Channel Passive Direct Box is a deceptively simple, yet surprisingly useful addition to any serious collection of audio equipment. The PDB4 is a four channel passive direct box that features four quality, fully transformer isolated, direct boxes in a 1U 19-inch rack mount chassis. Inputs and outputs of each of the four channels are isolated to maximize channel separation. Transformer isolation on each output helps to eliminate system ground loops.It is a rock solid, roadworthy interface for connecting outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced audio products. The PDB4 also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.Electric guitar and bass pick-up output signals, keyboards and line level signals, DJ console output signals, speaker level signals. However you decide to use it, we're sure you'll find the ART PDB4 Four Channel Passive Direct Box to be an indispensable addition to your audio equipment arsenal.ART PDB4 Four-Channel Passive Direct Box FeaturesFour Fully Isolated ChannelsSwitchable Input Attenuation (0dB, -20dB, -40dB)50k Ohm Instrument/Line Input50k Ohm 1/4-inch Parallel Link Jack600 Ohm XLR Output JackSwitchable Ground Lift1U 19-inch Chassis
Immediately available or ready for collection
Bluetooth Total MKII Radio transmission system for active speakers Bluetooth
€49.00*
Bluetooth Total is an XLR-equipped, rechargeable Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Total, you can quickly and easily add Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR input of a mixer or powered speaker, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Totals together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Total running for over 6 hours. The Bluetooth Total is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerWirelessly link two together for cable-free stereo playback*XLR-equipped connection100+ft rangeUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Total 2, or the Alto Professional Bluetooth Ultimate, both sold separately. Original Bluetooth Total is not supported
delivery time 14 days
dbx 1231 graphic equalizer 2x 31-band
€539.00*
DBX 12312x 31-Band Graphic EQ4 LED display indicators45mm Faders (20Hz - 20kHz)Range +/- 6dB und +/- 15dBbalanced 1/4" jack and XLR inputs/outputs.Size: 19"/3U
delivery time 14 days
Dbx ZC2 Remote
€83.00*
DBX DriveRack 260, 220i and ZoneProVolume control and mute switchConnection via Cat 5 cable
delivery time 14 days
dbx 286S mic preamp/processor with dynamics
€225.00*
The dbx 286S is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. The dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4" TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to "loop out" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination.
delivery time 14 days
ART EQ341 Equalizer
€159.00*
2-channel 15-band graphic equalizerPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm slider with center catchGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls Power switch, L / R control range switch, L / R bypass switch, L / R level control, Ground Lift switchFilter type constant Q-factor, center frequency accuracy 3%Frequency bands 2 x 15, 2/3 octave, according to ISO standardMaximum amplification / reduction adjustable, ± 6 dB or ± 12 dBTravel of the slider 20 mm with center catchIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range 20 Hz? 20 kHz, ± 0.5 dBExternal voltage difference 94 dBDistortion (THD) 0.01%Channel distance> 50 dBInputs / outputs XLR and 6.3 mm jack (active, symmetrical), cinch (unbalanced)Maximum input level +22 dBmInput impedance 20 kOhm (symmetrical), 15 kOhm (unbalanced)Maximum output level +18 dBm (balanced), +22 dBm (unbalanced)Output impedance
delivery time 14 days
