Turntables – DJ & HiFi Turntables for Perfect Vinyl Sound

ART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet (MM) to a wide variety of audio systems.The Precision Phono Preamp’s extraordinarily low noise amplifier allows connection to MC cartridges without picking up noise or distortion that transformers can exhibit. The audio is kept pristine with a low-cut filter to remove rumble and low frequency feedback, commonly undesirable for DJ’s and home use.Analog inputs on the ART Precision Phono Pre amp are switchable between Moving Magnet and Moving Coil. The unit changes both the gain and the cartridge loading to suit the selected cartridge. The front gain trim control with the signal present/clip LED allows the user to optimize the output for a wide range of cartridges.- Connect any turntable to a wide variety of audio systems. - Perfect for DJs and vinyl enthusiasts. - Switchable low cut rumble filter- Variable preamp gain- Signal Present/Clip Indicator - RCA preamp outputs- External power supply for lower noise - High accuracy/ low noise phono preamp - Moving Coil/Moving Magnet switchable input

Built-in adjustable Scratch Slide SwitchUser-replaceable scratch slide-switch keeps the action goingProtective dust cover and integrated carrying handleWall-powered with included AC adapter or six "D" cells(not included)Built-in speakerCartridge includedRemovable slip-matClass-compliant USB connection for PC recording33 1/3, 45 and 78 RPM settingsRCA line and headphone outputs1/8" Aux input with adjustable volumeWeight 4.3 poundsDimensions 11.9 x 11.9 x 4 inchesClass compliantMinimum System Requirements (PC): Windows 2000/XP/Vista USB 1.1 portMinimum System Requirements (MAC): Mac OS X 10.4.x* USB 1.1 port

1-channel stereo phono preamplifierFor connecting a turntable via stereo RCA socketsRCA output for connecting active speakers or stereo systemCan be connected directly with the power amplifier via jack socketGround terminal for avoiding humOperation via supplied power unitTECHNICAL SPECIFICATIONSPower supply: 100-240 V AC, 50/60 Hz12 V DC 150 mAPower connection: Mains input Coaxial power connector (M) Power supply cord with AC adapter (provided)Frequency range: 20 - 20000 HzS/N ratio: >84 dBTHD:

Phase Essential – Wireless DVS Controller for DJsThe Phase Essential is an innovative 2-deck DVS controller that revolutionizes classic turntable DJing. Instead of timecode vinyl and needles, Phase uses two wireless remotes that precisely track the rotation of your turntables and transmit the data to a receiver. Every movement is sent to your DJ software in real time – with ultra-low latency and maximum reliability.The two compact remotes are simply placed on the turntable and secured with magnets. Thanks to built-in motion sensors and a proprietary wireless protocol, signal transmission is up to five times faster than Bluetooth, with a response time of just around 1.5 ms. This ensures absolute precision – no needles, no cartridges, no worn-out vinyl.With up to 10 hours of battery life per remote and a durable build made from high-quality materials, the Phase Essential is designed for professional live performance. The receiver is powered via USB and connects directly to your DVS interface through RCA outputs. Phase is compatible with all major DVS systems such as Serato, Rekordbox, Traktor, and Virtual DJ.Included in the box:1 receiver2 wireless remotes2 RCA cables1 USB cable4 magnetic stickersTechnical specifications:Latency: approx. 1.5 msBattery life: up to 10 hReceiver: 2 × RCA outputs, USB type-BRemote size: 66 × 25 × 8.6 mm, weight: 18 gSystem: Mac OS 10.12 or later / Windows 10 or later, DVS-compatible software requiredThe Phase Essential delivers the authentic vinyl feel – without needles, without wear, and without dropouts. The perfect solution for turntablists and DJs who want wireless freedom with uncompromising precision.

The standard dust cover for the Reloop RP turntable models 1000, 2000 and 4000 MK3 & M3D.FEATURESSuitable for Reloop RP-1000/2000/4000 MK1 and MK2TECHNICAL DATADimensions: 442 x 68 x 348 mm (358 hinge seat)Incl. two hinges

Reloop Dust Cover RP-7Protection & Style for Your RP-7 TurntableThe Reloop Dust Cover RP-7 is a custom-fit protective lid designed specifically for the RP-7 7" turntable. Made from durable, dimensionally stable polymer, it reliably shields your turntable from dust, scratches, and everyday wear – whether you're in the studio, at home, or on the road.Its contoured edge design ensures a secure fit, and the smart cutout at the rear accommodates the tonearm and counterweight, allowing you to place the cover even while the turntable is in use. You can even leave it on while playing records, thanks to its practical low-profile design.With compact dimensions of approx. 358 × 282 × 71 mm and a weight of approx. 554 g, the cover integrates seamlessly into any setup without taking up unnecessary space.Ideal for DJs, vinyl lovers, and anyone who wants to keep their gear looking and performing its best.

FEATURESHinged dust coverSuitable for Reloop RP-7000/8000 MK1 and MK2Sturdy rigid plastic castTECHNICAL DATADimensions: 452 x 58 (75 tone arm base) x 348 mm (358 hinge seat)Incl. mounting hinges

Reloop Premium RP-7 Turntable CaseProfessional Protection for Your 7" TurntableThe Reloop Premium RP-7 Turntable Case is purpose-built to safely transport and stylishly showcase your RP-7 7" turntable. Designed with a rugged exterior, precision-molded interior, and smart features, this case offers everything DJs, collectors, and vinyl lovers need for mobile setups or secure storage.Maximum Protection – Smart ConstructionThe custom-shaped interior is perfectly tailored to the RP-7 and padded with shock-absorbing foam to keep all components securely in place. An integrated spacer ring with puck holder ensures the platter stays fixed during transport. Reinforced corners, durable aluminum edges, and a scratch-resistant matte black finish provide long-lasting durability with a professional look.Built for FlexibilityThe fully removable lid allows for quick setup, while also giving you the option to leave it in place during performances for added height. A built-in accessory compartment in the case base offers practical storage for cables and tools.Technical Specifications:External dimensions: approx. 435 × 350 × 220 mmInternal dimensions: approx. 346 × 266 × 123 mmWeight: approx. 4.66 kgMaterial: Plywood with aluminum profiles and foam paddingCompatible with: Reloop RP-7 7" TurntablePerfect for DJs, collectors, and vinyl enthusiasts who want to transport their RP-7 safely, stylishly, and with maximum functionality – whether on tour, in the club, or in the studio.

High-quality turntable for DJ and HiFi usePowerful belt-drive motor system absorbs unwanted vibration and noiseRedesigned metal top panel, tactile buttons and reinforced housing constructionFEATURESNEW in the MK2 version:Newly developed top panel and reinforced housing constructionReworked metallic buttons with improved feel & tactile responsePrecision pitch with selectable ranges of +/-10 %Superior finish in deep black metallicTurntable with belt-drive for DJ and hifi usePerfect for aspiring DJs and hifi enthusiastsPowerful belt-drive motor system absorbs unwanted vibration and noisePrecise motor control with 2 selectable speeds (33 1/3 & 45 rpm)Precision-engineered, die-cast aluminium platter with stable rotationStatically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanismUniversal connection for pick-up systems (SME)Extendible needle illuminationShock-absorbing feet for vibration isolationSturdy, heavy construction with optimized damping featuresDust cover available as optional accessoryIncl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, operating instruction manualTECHNICAL DATATurntable:Type: belt drive turntableDrive: belt driveMotor: DC motorTurntable speeds: 2 speeds, manual (33 1/3, 45 RPM)Brake time: < 1 sec.Start-up / rpm change: < 1 sec.Wow and flutter: < 0.25% WRMSSignal-to-noise ratio: > 50 dB (DIN-B)Brake system: electronic brakePlatter:Material: aluminium die-castDiameter: 332 mmTone arm:Type: universal, statically balanced, s-shapedEffective length: 230.5 mmOverhang: 16 mmTracking angle error: < 3°Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)Anti-skating range: 0 - 7 gConnections:1x PHONO out (gold-plated)General:Power supply: AC 115/230 V, 60/50 Hz (US/EU)Power consumption: 10 WDimensions: 450 (w) x 352 (d) x 144 (h) mmWeight: appr. 5.7 kg

QUARTZ-DRIVEN DJ TURNTABLE WITH DIRECT DRIVE AND BUILT-IN PHONO PRE-AMPThe RP-2000 USB MK2 is a versatile turntable for prospective DJs. In addition to the built-in phono pre-amp the turntable offers a USB audio output for digitizing your vinyl. The MK2 version features several improvements, including a newly developed top panel construction and improved metallic buttons with enhanced feel.QUALITY DIRECT DRIVE MOTOR AND PRECISION-ENGINEERED DIE-CAST PLATTERCompared to belt-driven turntables, the RP-2000 USB MK2 transfers its motor force directly to the drive hub – this way a higher torque generates power faster on the precision-engineered platter with minimal wow and flutter. The adjustable pitch control with a range of +/- 8 % is suitable for the finest pitch adjustments.STATICALLY BALANCED S-SHAPED TONE ARMThe RP-2000 USB MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Thanks to the universal SME connection, a large number of pick-up cartridges can be connected.USB AUDIO OUTPUT: DIGITIZE YOUR RECORDS!Recording your records to digital format is easy via the high resolution USB connection. Set up is fast, as no driver is required when connecting to your recording software. There's no need for grounding the RP-2000 USB MK2 and the built-in phono pre-amp allows for line level output.NEWLY DEVELOPED HAPTIC TOUCH AND STURDY HOUSING DESIGNThe new deep-black metallic top panel is equipped with metallic buttons for start/stop and speed settings. The improved touch upon hit offers a clear haptic feedback. With the push of a button the aluminium target light can be extended, so that the needle position can be seen in dark surroundings. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations.WITH PICK-UP AND HEADSHELLThe RP-2000 USB MK2 comes with the high-quality OM Black pick-up, handmade by Ortofon in Denmark, pre-fitted to a headshell ready for immediate playback.FEATURESNEW in the MK2 version:Newly developed top panel and reinforced housing constructionReworked metallic buttons with improved feel & tactile responsePrecision Pitch with selectable ranges of +/-8 %Superior finish in deep black metallicQuartz-driven DJ turntable with direct drivePerfect for beginnersUSB audio output for digitizing your records easilyPrecise motor control with 2 speeds selectable (33 1/3 & 45 rpm)Precision-engineered, die-cast aluminium platter with stable rotationStatically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanismUniversal connection for pick-up systems (SME)Extendible needle illuminationBuilt-in phono pre-amplifier (no grounding necessary)Switchable phono and line level outputShock-absorbing feet for vibration isolationSturdy, heavy construction with optimized damping featuresPrepared for dust cover (available as optional accessory)Incl. platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord, operating instruction manualTECHNICAL DATATurntable:Type: direct drive turntableDrive: quartz-driven direct driveMotor: 8-pol., 2-phase, brushless DC motorTurntable speeds: 2 speeds, manual (33 1/3, 45 RPM)Starting torque: > 1kg/cmBrake time: < 1 sec.Start-up / rpm change: < 1 sec.Wow and flutter: < 0.15% WRMSSignal-to-noise ratio: > 50 dB (DIN-B)Brake system: electronic brakePlatter:Material: aluminium die-castDiameter: 332 mmTone arm:Type: universal, statically balanced, s-shapedEffective length: 230.5 mmOverhang: 16 mmTracking angle error: < 3°Applicable pick-up weight: 3.5 – 8.5 g (incl. headshell 13 – 18 g)Anti-skating range: 0 - 7 gConnections:1x PHONO/LINE out (gold-plated)General:Power supply: AC 115/230 V, 60/50 Hz (US/EU)Power consumption: 13 WDimensions: 450 (w) x 352 (d) x 144 (h) mmWeight: appr. 6.76 kg

PROFESSIONAL UPPER TORQUE TURNTABLE SYSTEMWith the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.STURDY CASING CONSTRUCTIONBy using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASEThe RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).DUAL START/STOP BUTTONS, PRECISE MOTOR CONTROL AND REVERSE FUNCTIONAs well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mixHIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADERUsing the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMPThanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIESThe fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.FEATURESNEW features of the MK2 version:Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolationMore powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)Fine-tuned motor control for further optimization of wow and flutter and rotationNewly developed, height-adjustable tone arm base (VTA) and Anti-Skating controlParticularly light weight and rigid, satin aluminium material used for tone armAdjustable Pitch scale for precise adjustmentsOptional ground terminal offers additional protection in complex club & studio environmentsEasily replaceable, freely rotatable LED needle light in new unibody aluminium designHigh-quality and hard-wearing deep black, metallic finishQuartz driven DJ turntable with upper-torque direct driveAdjustable stop speed (0.2 - 6 sec.)Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)Precision manufactured, die cast aluminium turntableRubber inlays for reduction of vibrations and background noiseStatically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanismUniversal connection for pick-up systems (SME)Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)Quartz lockAdditional start/stop button for vertical positioningReverse function: switch for forwards and reverse operationRecessed connection cavity for easy installation in cases & seamless adjustmentPhono and line out (no grounding required)Removable mains and RCA cableSafety mains switchShock-absorbing feet against vibrationsIncl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructionsTECHNICAL DATATurntable:Type: direct-drive turntableDrive: quartz driven upper-torque direct driveMotor: 16-pole, 3-phase, brushless motorTurntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)Starting torque: 2.8 – 4.5 kg/cm (adjustable)Adjustable stop time (0.2 - 6 sec.)Start-up time / change to RPM: 55dB (DIN-B)Brake system: electronic brakePlatter:Material: die cast aluminiumDiameter: 332 mmWeight: approx. 1.5 kgTone arm:Type: universal, static balanced, S-shapedEffective length: 230 mmOverhang: 15 mmTracking error range: < 3°Offset Angle: 22°Stylus Pressure: 0 - 4 gVTA setting range: 0-6 mmUseable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)Anti-skating range: 0 – 3 gEffective tone arm mass: 12.8 g (incl. headshell)Connections:1x PHONO/LINE Out (gold-plated), 1x GND earth connectionGeneral:Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)Power consumption: 13 WDimensions: 458 x 354 x 144,6 mmWeight: approx. 11.7 kg

PROFESSIONAL UPPER TORQUE TURNTABLE SYSTEMWith the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.STURDY CASING CONSTRUCTIONBy using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASEThe RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).DUAL START/STOP BUTTONS, PRECISE MOTOR CONTROL AND REVERSE FUNCTIONAs well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mixHIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADERUsing the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMPThanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIESThe fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.FEATURESNEW features of the MK2 version:Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolationMore powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)Fine-tuned motor control for further optimization of wow and flutter and rotationNewly developed, height-adjustable tone arm base (VTA) and Anti-Skating controlParticularly light weight and rigid, satin aluminium material used for tone armAdjustable Pitch scale for precise adjustmentsOptional ground terminal offers additional protection in complex club & studio environmentsEasily replaceable, freely rotatable LED needle light in new unibody aluminium designHigh-quality and hard-wearing deep black, metallic finishQuartz driven DJ turntable with upper-torque direct driveAdjustable stop speed (0.2 - 6 sec.)Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)Precision manufactured, die cast aluminium turntableRubber inlays for reduction of vibrations and background noiseStatically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanismUniversal connection for pick-up systems (SME)Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)Quartz lockAdditional start/stop button for vertical positioningReverse function: switch for forwards and reverse operationRecessed connection cavity for easy installation in cases & seamless adjustmentPhono and line out (no grounding required)Removable mains and RCA cableSafety mains switchShock-absorbing feet against vibrationsIncl. turntable, slipmat, LED needle light, counterweight, Phono RCA cable with earth, power cord, operating instructionsTECHNICAL DATATurntable:Type: direct-drive turntableDrive: quartz driven upper-torque direct driveMotor: 16-pole, 3-phase, brushless motorTurntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)Starting torque: 2.8 – 4.5 kg/cm (adjustable)Adjustable stop time (0.2 - 6 sec.)Start-up time / change to RPM: 55dB (DIN-B)Brake system: electronic brakePlatter:Material: die cast aluminiumDiameter: 332 mmWeight: approx. 1.5 kgTone arm:Type: universal, static balanced, S-shapedEffective length: 230 mmOverhang: 15 mmTracking error range: < 3°Offset Angle: 22°Stylus Pressure: 0 - 4 gVTA setting range: 0-6 mmUseable weight of pick-ups: 3.5~8.5 g (incl. headshell 13~18 g)Anti-skating range: 0 – 3 gEffective tone arm mass: 12.8 g (incl. headshell)Connections:1x PHONO/LINE Out (gold-plated), 1x GND earth connectionGeneral:Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)Power consumption: 13 WDimensions: 458 x 354 x 144,6 mmWeight: approx. 11.7 kg

THE MOST ADVANCED DJ TURNTABLE EVER MADE.With the RP-8000 MK2, we present the most advanced turntable of all time, developed in close cooperation with renowned international turntable artists. This turntable is designed for a seamless integration with Serato DJ Pro, offering the possibility of controlling up to 7 different performance modes via the pad section. And thanks to the unique Platter Play mode, the pads can be used to control the platter's rotation speed to create melodies and authentic musical performances. The RP-8000 MK2 represents the perfect balance of a first-class professional turntable and an innovative musical instrument.The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musiciansDesigned for Serato DJ Pro: control 7 new colour-coded performance modesPlatter Play mode: performance pads can be used to control the speed of the platter to enable melodic and musical live performancesFEATURESNEW in the MK2 version:The most advanced DJ turntable ever made, developed in close collaboration with renowned international turntable musiciansDesigned for Serato DJ Pro: control 7 new RGB colour-coded performance modesPlatter Play: in this mode, the performance pads can be used to control the speed of the platter to enable melodic and more musical live performancesExtra large, highly responsive performance pads with multi-colour LEDs22 scales are available with the option to create up to 9 custom scalesPitch bending function via speed select buttons in Platter Play modeReworked control section: more streamlined multi-encoder and intuitive mode sectionFirst of its kind: independent pad modes (when used in conjunction with the ELITE mixer)Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolationMore powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)Fine-tuned motor control for further optimization of wow and flutter and rotationNewly-developed, height-adjustable MK2 tone arm base (VTA)Particularly lightweight and rigid satin aluminium material used for tone armAdjustable pitch scale for precise adjustmentsAdditional output: the turntable can be connected to two mixers at the same time and also allows easy switching from DVS to vinylOptional ground terminal offers additional protection in complex club & studio environmentsEasily replaceable, freely rotatable LED needle light in new unibody aluminium designHigh-quality and hard-wearing deep black, metallic finishQuartz driven hybrid turntable instrument with upper-torque direct driveTakes your DJ performances to a new level of creativity and musicalityMIDI compatible control section consists of multi-encoder, 8 large LED pads, three layers with 7 performance modes (cue, sampler, saved loops, pitch play, loop, loop roll, slicer) and 2 user modesDigital LC display for pitch, BPM, scale, key, deck assignment and firmware settingsSeamlessly combines a powerful musical instrument and a world class professional DJ turntableAdjustable stop time (0.2 - 6 sec.)Precise motor control with 3 speeds (33 1/3, 45 & 78 RPM)Precision manufactured, die cast aluminium turntableRubber inlays reduce vibrations and background noiseStatically balanced, universal S-shaped tone arm with hydraulic lift and anti-skating mechanismUniversal connection for pick-up systems (SME)High-resolution pitch fader (0.02 % resolution)Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)Quartz lockReverse function: switch for forward and reverse operationSmart USB link for up to 4 turntablesAuto deck-assign feature when linkedRecessed connection cavity for easy installation in cases & seamless adjustmentPhono and line out (no grounding required)Removable mains and RCA cablesSafety mains switchShock-absorbing feet insulate against vibrationsIncl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructionsTECHNICAL DATATurntable:Type: direct-drive turntableDrive: quartz driven upper-torque direct driveMotor: 16-pole, 3-phase, brushless motorTurntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)Starting torque: 2.8 - 4.5 kg/cm (adjustable)Adjustable stop time (0.2 - 6 sec.)Start-up time / change to RPM: < 0.2 secWow and flutter: 0.01% WRMS*S/N ratio: > 55 dB (DIN-B)Brake system: electronic brakePlatter:Material: die cast aluminiumDiameter: 332 mmWeight: approx. 1.5 kgTone arm:Type: universal, static balanced, S-shapedEffective length: 230 mmOverhang: 15 mmTracking error range: < 3°Offset Angle: 22°Stylus Pressure: 0 - 4 gVTA setting range: 0 - 6 mmUsable weight of pick-ups: 3.5 ~ 8.5 g (incl. headshell 13 ~ 18 g)Anti-skating range: 0 - 3 gEffective tone arm mass: 30 gConnections:1x PHONO/1x LINE out (gold-plated), 1x GND earth connection, 1x USB port (type B)General:Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)Power consumption: 17 WDimensions: 458 (w) x 354 (d) x 144,6 (h) mmWeight: approx. 11.8 kgIncl. turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions

Reloop RP-7 – Professional 7" DJ TurntableDiscover the Reloop RP-7 – the world’s first mass-produced DJ turntable designed exclusively for 7-inch vinyl records. A true tribute to the iconic 45s culture, the RP-7 combines a compact footprint with professional-grade performance, making it the ideal tool for DJs, vinyl collectors, and purists alike.Equipped with a high-torque, brushless DC motor (2.5 kg/cm), the RP-7 delivers precise control for cueing, beatmatching, and scratching. Its straight, statically balanced tonearm with integrated rubber damping ensures superior tracking without the need for anti-skating adjustments – simple to set up and ready to perform.The turntable supports three playback speeds (33 ?, 45, and 78 RPM) and features a smooth, stepless pitch fader with ±8%, ±16%, and ±35% ranges – plus a pitch reset button for instant return to standard speed.Designed with both functionality and aesthetics in mind, the RP-7 includes a detachable LED needle light for perfect visibility in low-light settings. The recessed connection panel offers clean cable management, while the switchable phono/line output with gold-plated RCA connectors ensures maximum flexibility and signal quality. Its deep black metallic finish not only looks premium but is built to withstand the rigors of daily DJ use.What's in the box:Reloop RP-7 turntable, aluminum platter, slipmat, slipsheet, 7" puck adapter, counterweight, detachable LED needle light, RCA cable with ground wire, power cable, and user manual (cartridge not included).Technical specifications:Dimensions: 350 x 270 x 139 mmWeight: 5.7 kgSpeeds: 33 ? / 45 / 78 RPMPitch range: ±8%, ±16%, ±35%Drive: Direct-drive with brushless DC motorOutputs: Switchable phono/line, gold-plated RCA connectorsThe Reloop RP-7 is the ultimate solution for DJs and collectors who want to play, digitize, or perform with 7-inch records – without compromising on quality or features.

Reloop RP/RT Drive Belt

Portable turntable for vinyl lovers & scratch artistsBluetooth streaming, versatile connection possibilities and optional battery operationComes with 7'' scratch vinyl, 45-mm crossfader, cartridge and integrated speakerFEATURESPortable turntable for vinyl lovers & scratch artistsMobile fun with your turntable, anywhere you goOutstanding for mobile scratching and cuttingOut of the box: comes with 7'' scratch vinyl, pre-installed 45-mm-crossfader & cartridge, integrated speaker, Bluetooth audio receiver, USB recording function, slipmat, and dust coverHigh-grade 7''-scratch-record: professionally recorded samples for scratching and beats for jugglingBluetooth audio streaming: wireless streaming of music or beats to the deviceSmart USB recording: direct recording of scratches & cuts to USB in MP3 formatCan also be used for digitizing vinylIntegrated speaker on the turntable's left3 selectable speeds (33 1/3, 45 & 78 rpm)Extremely stable tone arm with transport lockCartridge with excellent tracking featuresPrecise 45-mm-crossfader with two-rail glide technologyCrossfader can be installed on preferred side (both-way)Two headphones connections for listening and monitoringAUX input facilitates connection of several turntables (daisy chain)Easy battery charging via USB PSU or USB power bank (sold separately)Installed start/stop buttonPrecise speed adjustment via pitch control with +/-20 %Tone control to adjust low frequencies by +/- 10 dBVolume control for AUX input and master/headphonesPower LED indicates the turntable's operational status7'' record puck adaptor with holderAnti-skip rubber feet for secure standEspecially sturdy and portable shape factor with optional battery operationAdditional protection thanks to dust cover; can be transported via carrying handle when closedLocking of dust cover for safe transportCan be operated with regular USB PSU (5 V, 2 A), USB power bank or batteries (sold separately)Batteries can be inserted into battery compartment on the device's bottom 2x Li-Ion 18650 (sold separately)Incl. 7'' scratch vinyl, pre-installed cartridge, slipmat, dust cover, puck adapter, USB cable, instruction manual and Super Spin Duck Looper appTECHNICAL DATABelt driveInputs: AUX 3.5 mm stereo, Bluetooth audioOutputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereoRecording format: MP3 with 192 kbit/sRecording quality: 16 bit / 44.1 kHzBattery type: 2x Li-Ion 18650 (batteries sold separately)Power supply: 5 V, 2 A micro USB (PSU sold separately)Dimensions: 370 x 95 x 260 mmWeight: 2 kg

Analogue HiFi Turntable for Audio PuristsThe TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.Smooth belt drive & low-noise DC motorThe precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.Static balanced, straight tone arm with optimal tracking performanceThe TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.Flexible Headshell ConnectionThe headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.Classy, matt slimline housing with high-quality terminalAlongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.FEATURESBelt-driven Hi-Fi turntableFactory fitted with Ortofon OM10 cartridgeNew straight tonearm design with optimal tracking performanceManual arm liftLow vibration DC motorIntegrated motor control with Speed-Switch for conveniently selectingtwo different speeds 33 / 45 rpmExternal DC power supplyDie-cast Aluminum Platter with chrome edgingAnti-Skating Wheel-SystemGold-plated, corrosion resistant connections (all cables detachable)Slim-line wooden Plinth with mat black finishConvenient power switch at the side bottomIncluded Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshellTECHNICAL DATATurntable Section:Type: Belt-Driven Analogue Turntable SystemDrive: Belt driveMotor: DC MotorTurntable Speeds: 2 speeds (33 1/3, 45)Wow and flutter: 0.2% WRMSS/N Ratio: >65 dB (a-weight)Turntable Platter:Material: aluminium die-castDiameter: 300 mmWeight: 550 gTonearm Section:Type: Static Balanced Straight TonearmEffective Length: 224 mmOverhang: 19 mmTracking Error Angle: 25°Tracking Force: 1.5 gApplicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)Anti-Skating Range: 0 – 3 gTerminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:Power supply: DC 12 V, 500 mAPower Consumption: 6 WDimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)Weight: Approx. 4.6 kgIncluded Accessories:Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

Analogue HiFi Turntable for Audio PuristsThe TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.Smooth belt drive & low-noise DC motorThe precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.Static balanced, straight tone arm with optimal tracking performanceThe TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.Flexible Headshell ConnectionThe headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.Classy, matt slimline housing with high-quality terminalAlongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.FEATURESBelt-driven Hi-Fi turntableFactory fitted with Ortofon OM10 cartridgeNew straight tonearm design with optimal tracking performanceManual arm liftLow vibration DC motorIntegrated motor control with Speed-Switch for conveniently selectingtwo different speeds 33 / 45 rpmExternal DC power supplyDie-cast Aluminum Platter with chrome edgingAnti-Skating Wheel-SystemGold-plated, corrosion resistant connections (all cables detachable)Slim-line wooden Plinth with mat black finishConvenient power switch at the side bottomIncluded Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshellTECHNICAL DATATurntable Section:Type: Belt-Driven Analogue Turntable SystemDrive: Belt driveMotor: DC MotorTurntable Speeds: 2 speeds (33 1/3, 45)Wow and flutter: 0.2% WRMSS/N Ratio: >65 dB (a-weight)Turntable Platter:Material: aluminium die-castDiameter: 300 mmWeight: 550 gTonearm Section:Type: Static Balanced Straight TonearmEffective Length: 224 mmOverhang: 19 mmTracking Error Angle: 25°Tracking Force: 1.5 gApplicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)Anti-Skating Range: 0 – 3 gTerminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:Power supply: DC 12 V, 500 mAPower Consumption: 6 WDimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)Weight: Approx. 4.6 kgIncluded Accessories:Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

Analogue HiFi Turntable for Audio PuristsThe TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.Smooth belt drive & low-noise DC motorThe precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.Static balanced, straight tone arm with optimal tracking performanceThe TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.Flexible Headshell ConnectionThe headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.Classy, matt slimline housing with high-quality terminalAlongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.FEATURESBelt-driven Hi-Fi turntableFactory fitted with Ortofon OM10 cartridgeNew straight tonearm design with optimal tracking performanceManual arm liftLow vibration DC motorIntegrated motor control with Speed-Switch for conveniently selectingtwo different speeds 33 / 45 rpmExternal DC power supplyDie-cast Aluminum Platter with chrome edgingAnti-Skating Wheel-SystemGold-plated, corrosion resistant connections (all cables detachable)Slim-line wooden Plinth with mat black finishConvenient power switch at the side bottomIncluded Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshellTECHNICAL DATATurntable Section:Type: Belt-Driven Analogue Turntable SystemDrive: Belt driveMotor: DC MotorTurntable Speeds: 2 speeds (33 1/3, 45)Wow and flutter: 0.2% WRMSS/N Ratio: >65 dB (a-weight)Turntable Platter:Material: aluminium die-castDiameter: 300 mmWeight: 550 gTonearm Section:Type: Static Balanced Straight TonearmEffective Length: 224 mmOverhang: 19 mmTracking Error Angle: 25°Tracking Force: 1.5 gApplicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)Anti-Skating Range: 0 – 3 gTerminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:Power supply: DC 12 V, 500 mAPower Consumption: 6 WDimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)Weight: Approx. 4.6 kgIncluded Accessories:Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

Reloop Turn 3 MK2 – Premium HiFi Turntable with USB and Ortofon 2M RedThe Reloop Turn 3 MK2 is a high-quality HiFi turntable that combines classic analog technology with modern features. Perfect for vinyl enthusiasts who value excellent sound quality, ease of use, and digital archiving.Key Features:Precision belt drive with low-vibration DC motor: Ensures stable and smooth platter rotation.Electronic speed selection: Easily switch between 33 1/3, 45, and 78 RPM via a large rotary knob—no belt changes required.Pre-installed Ortofon 2M Red cartridge: Delivers clear, detailed sound with an elliptical stylus.Integrated high-end phono preamp: Allows direct connection to amplifiers without a dedicated phono input.USB recording function: Digitize your vinyl records directly to your PC or Mac in CD quality.Semi-automatic stop function: The tonearm automatically lifts at the end of the record.Manual tonearm lift: For precise placement of the stylus on the record.Continuously adjustable anti-skating: Ensures optimal tracking and sound reproduction.Aluminum die-cast platter: Provides even rotation and reduces resonance.Shock-absorbing feet: Minimize vibrations and protect against external interference.High-quality MDF chassis with piano lacquer finish: Gives the turntable a stylish, elegant look.Technical Specifications:Drive type: Belt driveMotor: DC motorSpeeds: 33 1/3, 45, 78 RPMWow & flutter: 0.2% WRMSOutput level (Phono): 4.0 mV (with Ortofon 2M Red)Output level (Line): 224 mV (with Ortofon 2M Red)Connections: Gold-plated RCA (phono), USB Type BUSB audio output: 48 kHz / 16-bitSupported OS: Windows & MacDimensions (with dust cover): 450 x 352 x 138.7 mmWeight: 6.5 kgPackage Contents:Reloop Turn 3 MK2 turntablePre-installed Ortofon 2M Red cartridgeCounterweightHinged dust coverFelt matAluminum platter7” aluminum adapterRCA and USB cablesInternational power supply (UK/EU/US)The Reloop Turn 3 MK2 combines excellent sound quality with practical features for modern vinyl enjoyment and seamless record digitization.

Direct Drive HiFi Turntable SystemWith TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.Powerful DC motor & low-resonance die-cast platterThe brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.Static balanced S-tone arm & Hi-tech Ortofon cartridge systemThe TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.High-quality control elements & connectionsThe three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.Elegant design in a particularly heavy-duty constructionThe housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record.FEATURESQuartz-Controlled HiFi turntable with high torqueBrushless Direct Drive DC MotorPrecision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotationDeadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and dampingStatic-balanced S shaped tonearm with VTA adjustmentAdjustable anti-skating dial for improved cartridge trackingPre-installed Ortofon 2M Red cartridgeIntegrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM)Universal Headshell Connector provides added flexibilityHigh Quality Phono outputs (with separate grounding connection)Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable)Sunk-in terminal cavity for protected connectionEspecially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decouplingSupplied counterweight supports a wide variety of cartridgesElegant design with deep black Piano Finish and a fully gold anodised PlatterIncluded Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshellTECHNICAL DATATurntable Section:Type: Direct Drive Manual Turntable SystemDrive: Quartz driven upper-torque direct driveMotor: 16 pole, 3 phase, brushless DC motorTurntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)Starting Torque: 4500 g/cmStart-up time / rpm change: less than 0.2 sec.Wow and flutter: 0.01% WRMSS/N Ratio: More than 55 dB (DIN-B)Brake system: electronic brakeTurntable Platter:Material: aluminium die-castDiameter: 332 mmWeight: About 1.8 kg (including rubber mat)Tonearm Section:Type: Universal Static Balanced S-ShapedEffective Length: 230 mmOverhang: 15 mmTracking Error Angle: Less than 3 degreeOffset Angle: 22°Stylus Pressure: 0 - 4 gAdjustable Tonearm Base (VTA): 0-6 mmApplicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)Anti-Skating Range: 0 – 3 gEffective tonearm mass: 20 g (incl. headshell)Terminals:1x PHONO Out (gold-plated), 1x GND Earth TerminalGeneral:Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)Power Consumption: 9 WDimensions: 458 (W) x 368.3 (D) x 162.4 (H) mmWeight: approx. 12.8 kgIncluded Accessories:Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, power cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

Reloop Turn 7 – Premium HiFi Belt-Drive Turntable with USB and Ortofon 2M RedThe Reloop Turn 7 is a high-quality HiFi turntable that combines classic belt drive with modern technology and elegant design. Perfect for vinyl enthusiasts who value excellent sound, ease of use, and stylish looks.Key Features:Premium belt drive with low-vibration DC motor for stable and smooth platter rotationElectronic speed selection between 33 1/3 and 45 RPM via start/stop rotary switch, no belt changes required20 mm thick, 1.7 kg acrylic platter for high flatness and anti-static propertiesIndirect blue LED illumination for an atmospheric lookAudiophile carbon tonearm with height adjustment (VTA) and anti-skating for precise trackingPre-installed Ortofon 2M Red cartridge for clear, dynamic soundUniversal SME headshell connector for easy cartridge upgradesUSB output for simple vinyl digitization to PC or MacBuilt-in preamp, switchable between phono and line outputGold-plated RCA connectors for lossless signal transmissionHeight-adjustable aluminum feet for vibration dampingSolid MDF chassis with piano lacquer finish for a premium appearanceTechnical Specifications:Drive: Belt driveMotor: DC motorSpeeds: 33 1/3 and 45 RPMPlatter: 20 mm acrylic, 1.7 kgTonearm: Carbon, height adjustable (VTA), anti-skatingCartridge: Ortofon 2M Red (pre-installed)USB output: YesPreamp: Built-in, switchable phono/lineConnections: Gold-plated RCADimensions (W x H x D): 420 x 148 x 356 mmWeight: 8.2 kgPackage Contents:Reloop Turn 7 turntablePre-installed Ortofon 2M Red cartridgeCounterweightHinged dust coverFelt matAluminum platter7” aluminum adapterRCA and USB cablesInternational power supply (UK/EU/US)User manualThe Reloop Turn 7 combines excellent sound, premium build quality, and modern design for the discerning vinyl enthusiast.

Reloop Turn X – Premium HiFi Direct Drive Turntable with Ortofon 2M BlueThe Reloop Turn X is a high-precision, quartz-controlled direct drive turntable that combines audiophile sound quality with elegant, modern design. It’s ideal for demanding vinyl enthusiasts who value accurate speed control, superior build quality, and versatile features.Key Features:Quartz-controlled direct drive with powerful DC motor for stable and consistent rotationElectronic start/stop control with rotary switch for smooth operationThree playback speeds: 33 1/3, 45, and 78 RPMAudiophile-grade S-shaped tonearm, statically balanced with adjustable VTA and anti-skatingPre-installed Ortofon 2M Blue cartridge for clear, detailed and dynamic soundHeavy 305 mm die-cast aluminum platter (2.1 kg) with rubber damping for optimal resonance controlHigh-quality MDF chassis with elegant black piano lacquer finishHeight-adjustable isolator feet for effective vibration dampeningGold-plated phono outputs and grounding terminal for top-tier signal transmissionUltra-low-noise switching power supply for clean power and minimal interferenceTechnical Specifications:Drive: Quartz-controlled direct drive, brushless DC motor (16-pole, 3-phase)Speeds: 33 1/3, 45, 78 RPMStart torque: > 4500 g/cmWow and flutter: < 0.1% WRMSPlatter: Die-cast aluminum, 305 mm, 2.1 kgTonearm: S-shaped, statically balanced, 230 mm length, adjustable VTACartridge: Ortofon 2M Blue (pre-installed)Output voltage: 5.5 mV (at 1 kHz, 5 cm/s)Signal-to-noise ratio: > 60 dBFrequency response: 20 Hz – 20 kHz (+2 / -1 dB)Power supply: AC 100–240 V, 50/60 HzIncluded in the Box:Reloop Turn X turntablePre-installed Ortofon 2M Blue cartridgeDust coverFelt matCounterweightRCA cableUser manualThe Reloop Turn X delivers exceptional audio performance and craftsmanship, making it the perfect choice for audiophiles and vinyl purists.