The ELA loudspeaker, or "electrical loudspeaker system", serves as an announcement system and is mainly used as a sound reinforcement system for announcements in public spaces.
The BD 100V Indoor/Outdoor Speaker Series are engineered and tuned to offer weatherproof construction, excellent sound quality and supreme flexibility. This Series speakers is featured with a high end two-way system; a 1” silk-dome tweeter and a polypropylene 6.5” bass/midrange driver. The low-frequency output is bolstered by the use of a rear-mounted bass radiator. These enclosures are ideal for outdoor events, swimming pools, garden areas and marine or boat use. Adjustable between 70V, 100V tappings or 8 Ohm operation via rotary switch. You can mount the speakers to the wall horizontally or vertically with the included mounting kit.Weather resistant ABS plastic enclosure and aluminium grilleUV Protected housingTweeter: 1” Silk Soft DomeWoofer: 6.5” Polypropylene mid/low driverBass Radiator 70V/100V multi-tap transformer or 8OhmHorizontal or Vertical mountingWeather Proof: IPX5 for Indoor/outdoor useIncluding aluminium BracketSupplied per pieceOutput power: RMS 40WDiameter tweeter: 1"Diameter woofer: 6.5"Tweeter type: DomeMagnet type: FerriteImpedance: 100V, 70V, 8 OhmTappings power (100V): 5W, 10W, 20W, 40WTappings power (70V): 2.5W, 5W, 10W, 20WFrequency response: 90Hz - 20.000HzSPL @ 1W/1m: 86dBIP rating: IPX5Dimensions (L x W x H): 195 x 200 x 285Weight: 3.5kgAccessories: Mounting bracket
Installation amplifier with digital signal processor and BLU-LinkEfficient DriveCore circuit ensures low power consumption, the best audio quality and high operational reliabilityDigital signal processor with EQs, limiter, delay and crossover saves external devices and reduces sources of errorVersatile use for both 70/100 volt ELA systems and low-resistance systemsNetwork-compatible, remote control and monitoring of all important parameters via HiQnet with Audio Architect softwareBLU-Link input and output for lossless audio transmission2x 150 watts at 2 ohms2x 300 watts at 4 ohms2x 300 watts at 8 ohms2x 300 watts at 70 or 100 voltsBridged 300 watts at 4 ohms600 watts bridged at 8 or 16 ohmsBLU-Link input and output for lossless audio transmissionDSP 96kHz, 32-bit floating point16 EQs (8x input & 8x output)Delay up to 1,000 msLevelMAX limiterDamping factor> 1,000Temperature controlled fanImpedances 2-16 ohmsImpedances bridged 4-16 ohmsAUX port for sleep mode, on / off, status etc.Inputs: Phoenix connectorOutputs: screw terminalsHeight 2 UInstallation depth: 31.2 cm (+3.3 front panel)Weight 6.6 kg
Input voltage: 100 V Components: 20 cm woofer (8"), 1.5 cm tweeter (0.5") Rated power: 10 W RMS (green) 20 W RMS (yellow) 40 W RMS (red) Impedance: 8 Ohm / 40WSensitivity (1 W/m): 87 dB, ±3 dB Max. SPL (1 m): 101 dB Frequency range: 50 Hz - 20 kHz Dimensions (D x D): 270 x 105 mm Mounting cutout: 240 mm ø Weight: 2.2 kg
The DN-205IO is a 6.5", 2-way passive indoor-outdoor speaker for installations in restaurant patio areas, outdoor bar vignettes, health clubs, outdoor pool areas, and other applications where outdoor music and paging is required. The DN-205IO is weather-resistant and includes a bracket for mounting. For maximum flexibility, each speaker is compatible with 70V/100V/8O systems by having an adjustable tap. The speaker binding post screw terminal wire connection accepts larger diameter wire for 8O use - along with smaller diameter 70V/100V wire. The adjustable horizontal/vertical mounting bracket attaches to the top and bottom of the speaker and to the mounting surface.2-way design - 6.5” woofer and 1” tweeter70V/100V/8O operationPower handling: 50W (RMS), 100W (PMPO)Transformer taps at 100V (20W, 40W, 8O) and 70V (10W, 20W, 40W, 8O)Weather-resistant design for exterior usePaintable white cabinet and grilleAdjustable angle wall-mount bracket includedDriversLow-Frequency Driver: 6.50" (165.5mm)High-Frequency Driver: 1" (25mm)Power: 50W RMSImpedance: 8OTransformer Taps: 70V, 100VFrequency Response: 60 Hz - 20 kHzSensitivity: 86 dB ± 2 dB (1W/1m)Dimensions (W x H x D): 5.43" x 11.65" x 7.12" (138 x 296 x 181mm)Weight: 9.17 lbs (4.16 kg)
For amplifiers or speakers without built-in 100 V audio transformerConverts low-impedance signals into 100 V signals5 power tapsPower: 30 W RMSPrimary: 4/8/16 ohmsSecondary: 30/22.5/15/7.5/3.75 WDimensions: 85 x 54 x 50 mmWeight: 0,675 kgFrequency range: 40 - 17000 HzHeight: 5,6 cmDepths: 5,7 cmWidth: 9,3 cm
Power amplifier for PA speakersFan-cooled 3 Mic and 3 Aux inputs 1 Line output 1 Mic connection on the front panel with priority function Treble and bass control 7-fold level indicator Master control 19" dimensions with 2UPower supply: 230 V AC, 50 Hz ~ Output power: 120 W RMS Output type: 70 V, 100 V or 4-16 Ohms Mic input: 5 mV, 600 Ohms Line input: 300 mV, 10 kOhms Output-connectors: Screw connectors Frequency range: 80 Hz - 14 kHz S/N-ratio: Aux: 85 dB Mic: 75 dB Dimensions: 483 x 400 x 88 mm Weight: 11.5 kg
MP-60 PA mixing amplifier PA mono mixing amplifierPA outputs for 70 V or 100 V PA speakers or for low-impedance speakers (4-16 ohms)3 microphone inputs (6.3 mm jack, unbal.) with separate level controls Microphone input 3 with adjustable priority circuit 3 line inputs (stereo RCA) with separate level controls 1 line output (stereo RCA) Chime, switchableTreble and bass control for the output signal7-fold LED level displayMaster control for the output signal Fan-cooledProtection circuits with LED indication: over current, short circuit, turn-on delayRack installationPower supply: 230 V AC, 50 Hz ~ Power consumption: 120 W Output power: 60 W RMS Output type: 70 V, 100 V or 4-16 ohms Mic input: 5 mV, 600 ohms Line input: 300 mV, 10 kohms Output connectors: Screw connectors Frequency range: 80 Hz - 14 kHz S/N ratio: 85 dB (line), 75 dB (mic) Dimensions: 483 x 400 x 88 mm Weight: 8.5 kg
PA outputs for 70 V or 100 V PA speakers or for low-impedance speakers (4-16 ohms)3 microphone inputs (6.3 mm jack, unbal.) with separate level controls Microphone input 3 with adjustable priority circuit 3 line inputs (stereo RCA) with separate level controls 1 line output (stereo RCA) Chime, switchableTreble and bass control for the output signal7-fold LED level displayMaster control for the output signal Fan-cooledProtection circuits with LED indication: over current, short circuit, turn-on delayRack installationPower supply: 230 V AC, 50 Hz ~ Power consumption: 500 W Output power: 250 W RMS Output type: 70 V, 100 V or 4-16 ohms Mic input: 5 mV, 600 ohms Line input: 300 mV, 10 kohms Output connectors: Screw connectors Frequency range: 80 Hz - 14 kHz S/N ratio: 85 dB (line), 75 dB (mic) Dimensions: 483 x 400 x 88 mm Weight: 11.5 kg Shipping weight: 13.40 kg
PA outputs for 70 V or 100 V PA speakers or for low-impedance speakers (4-16 ohms)MP3 player with IR remote control and LCD with blue backlightSD card slot and USB input Folder navigation and repeat functions (1, All)3 microphone inputs (6.3 mm jack, unbal.) with separate level controls Microphone input 3 with adjustable priority circuit Technical Specifications:Power supply: 230 V AC, 50 Hz Power consumption: 700 W Output power: 350 W RMS Output type: 70 V, 100 V or 4-16 ohms Mic input: 5 mV, 600 ohms Line input: 300 mV, 10 kohms Output connectors: Screw connectors Frequency range: 80 Hz - 14 kHz S/N ratio: 85 dB (line), 75 dB (mic) Playback format audio player: MP3 Available storage media: USB devices and SD(HC) cards up to 32 GB File system: FAT32 Number of files: max. 999 Dimensions: 483 x 400 x 88 mm Weight: 14 kg •3 line inputs (stereo RCA) with separate level controls •1 line output (stereo RCA) •Chime, switchable•Treble and bass control for the output signal•7-fold LED level display•Master control for the output signal •Fan-cooled•Protection circuits with LED indication: over current, short circuit, turn-on delay•Rack installation
Power supply: 230 V AC, 50 Hz ~ Power consumption: 1300 W Output power: 650 W RMS Output type: 70 V, 100 V or 4-16 ohms Mic input: 5 mV, 600 ohms Line input: 300 mV, 10 kohms Output connectors: Screw connectors Frequency range: 80 Hz - 14 kHz S/N ratio: 85 dB (line), 75 dB (mic) Playback format audio player: MP3 Available storage media: USB devices and SD(HC) cards up to 32 GB File system: FAT32 Number of files: max. 999 Dimensions: 483 x 400 x 88 mm Weight: 20 kg Shipping weight: 20.35 kg
The Omnitronic MPZ-500.6 ELA mixer amplifier is your reliable partner for ELA sound reinforcement systems. Thanks to its 19" format, it is ideally suited for both mobile and permanent installations.Outputs for ELA loudspeakers with 70 V and 100 V audio transformers or 4-16- Ohm loudspeakers leave nothing to be desired. In addition, you can also connect a device with line level (e.g. mixing console) to the line output. With 6 mixable inputs you are always flexible. Connect up to 3 microphones and 3 line level devices.Control your ELA speakers conveniently via the 6 zone outputs of the MPZ-500.6. They can be switched separately on the front panel. For you, this means the greatest possible adaptability when implementing your sound reinforcement concept.Make yourself heard!The microphone input at the front has an adjustable priority switch. It allows you to make important announcements with automatic, continuously adjustable level reduction of all signals. You can also use the gong to draw attention to your announcement.Protective functionsA fan protects the interior of your MPZ-500.6 from overheating. In addition to a switch-on delay, it has protection circuits against overvoltage and short-circuits. In these cases, your loudspeakers are electrically isolated from the amplifier. This protects both the MPZ-500.6 and your speakers from damage.6-zone PA mono mixing amplifier, 500 W, zones switchableComfortable control of PA speakers via 6-zone technology6 PA zone outputs, independently switchable on the front panelMaster PA output (70 V and 100 V)Output for low-impedance speakers (4-16 ohms)2 rear microphone inputs (6.3 mm jack, unbal.)1 front microphone input (combination XLR/6.3 mm jack, unbal.) with adjustable priority circuitAll microphone inputs with separate level controls3 line inputs (stereo RCA) with separate level controls1 line output (stereo RCA)Chime, switchableTreble and bass control for the output signal7-fold LED level displayMaster control for the output signalProtection circuits with LED indication: over current, short circuit, turn-on delayRack installation, brackets detachableThe device is cooled by cooling fan(19") 48.3 cm rack installation 2 UTECHNICAL SPECIFICATIONSPower supply: 230 V AC, 50 HzPower consumption: 1000,00 WOutput power: Max. 500 W, 500 W RMSPower connection: Fixed power supply cord with safety plugFrequency range: 80 - 16000 HzS/N ratio: >75 dB Microphone, >85 dB lineTHD:
6-zone PA mono mixing amplifier, MP3 player & IR remote, zones switchable, 650 WComfortable control of PA speakers via 6-zone technology6 PA zone outputs, independently switchable on the front panelMaster PA output (70 V and 100 V)Output for low-impedance speakers (4-16 ohms)MP3 player with IR remote control and LCD with blue backlightSD card slot and USB inputFolder navigation and repeat functions (1, All)2 rear microphone inputs (6.3 mm jack, unbal.)1 front microphone input (combination XLR/6.3 mm jack, unbal.) with adjustable priority circuitAll microphone inputs with separate level controls3 line inputs (stereo RCA) with separate level controls1 line output (stereo RCA)Chime, switchableTreble and bass control for the output signal7-fold LED level displayMaster control for the output signalProtection circuits with LED indication: over current, short circuit, turn-on delayRack installation, brackets detachableThe device is cooled by cooling fanControlling by IR remote control(19") 48.3 cm rack installation 2 U
Omnitronic 100 V PA speaker systems with an excellent sound for general applications- 2-way system with 16.5 cm woofer (6.5") and 2.5 cm silk dome tweeter (1")- Weatherproof (IP65) plastic cabinet with metal grille and cover for the connectors- 100 V transformer with 4 power taps (4 W, 8 W, 16 W and 32 W)- Power selector switch with 8 ohms operating position- Panning and tilting mounting bracket allows ceiling or wall installation in most varying angles - Connection via screw terminals - Packed as a pair- For indoor and outdoor PA applicationsInput: 100 V or 8 ohms Components: 16.5 cm woofer (6.5"), 2.5 cm tweeter (1") Connections: screw terminals Rated power: 4/8/16/32 W RMS Sensitivity: 90 dB (1 W, 1 m) Max. SPL: 93 dB (1 m) Impedance: 8 ohms Frequency range: 50 Hz - 20 kHz Dispersion angle (HxV): 170° x 170° Dimensions (L x W x H): 190 x 195 x 290 mm Weight (piece): 3 kg (incl. bracket)
Omnitronic 100 V PA speaker systems with an excellent sound for general applications- 2-way system with 16.5 cm woofer (6.5") and 2.5 cm silk dome tweeter (1")- Weatherproof (IP65) plastic cabinet with metal grille and cover for the connectors- 100 V transformer with 4 power taps (4 W, 8 W, 16 W and 32 W)- Power selector switch with 8 ohms operating position- Panning and tilting mounting bracket allows ceiling or wall installation in most varying angles - Connection via screw terminals - Packed as a pair- For indoor and outdoor PA applicationsInput: 100 V or 8 ohms Components: 16.5 cm woofer (6.5"), 2.5 cm tweeter (1") Connections: screw terminals Rated power: 4/8/16/32 W RMS Sensitivity: 90 dB (1 W, 1 m) Max. SPL: 93 dB (1 m) Impedance: 8 ohms Frequency range: 50 Hz - 20 kHz Dispersion angle (HxV): 170° x 170° Dimensions (L x W x H): 190 x 195 x 290 mm Weight (piece): 3 kg (incl. bracket)
6-zone ELA mono mixing amplifier, 350 watts, zones controllableComfortable control for ELA loudspeakers via 6-zone technology6 ELA zone outputs (100 V), each with 5-level volume controlMaster ELA speaker output (70 and 100 V)Connection option for low-impedance loudspeakers (4-16 ohms)2 back microphone inputs (6.3 mm jack, unsym.)1 front microphone input (combination XLR / 6.3 mm jack, unsym.) On the front panel with adjustable priority functionAll microphone inputs with separate volume controls3 line inputs (stereo cinch) with separate volume controls1 line output (stereo cinch)Gong, switchableTreble and bass tone controls for output signal7x LED level meterMaster controller for the output signalfan cooledProtection circuits with LED display: overvoltage, short circuit, switch-on delayCase design: (19 ") 48.3 cm rack mounting 2 HETechnical data:Power supply: 230 V AC, 50 HzTotal connected load: 700.00 WPower connection: Fixed via power supply cable with protective contactFrequency range: 80 - 16000 HzImpedance: 100V Technic ELANoise-to-noise ratio:> 75 dB microphone; > 85 dB lineOutput power: 350 W RMSOutput type: 70 V, 100 V or 4-16 ohmsOutput current: 5 A (70 V), 3.5 A (100 V)Microphone inputs: 5 mV, 600 ohmsLine inputs: 300 mV, 10 kOhmSpeaker outputs: screw terminal, terminal stripDistortion: 0.5% (1 kHz)Dimensions (W x H x D): 48.3 x 8.9 x 38.5 cmWeight: 14.10 kg
10 cm full-range speaker (4")100 V transformer with 2 power tapsEasy mounting, similar to standard flush-mount lightsFor speech and background music in indoor PA systemsInput voltage: 100 VComponents: 10 cm speaker (4")Rated power:3 W RMS (white)6 W RMS (red)COM (black)Sensitivity (1 W/ 1 m): 89 dB, ±3 dBMax. SPL (1 m): 91 dBFrequency range: 100 Hz - 20 kHzDimensions (D x D): 135 x 80 mmMounting cutout: 110 mm øWeight: 0.5 kgShipping weight: 0.63 kg
Ceiling-mount speaker black6.5" full-range speaker 100 V transformer with 3 power tapsABS plastic housing with metal front grilleFor speech and background music in indoor PA systemsInput voltage: 100 V Components: 16.5 cm speaker (6.5") Rated power: 1.25 W RMS (green) 2.5 W RMS (yellow) 5 W RMS (red) COM (black) Sensitivity (1 W/ 1 m): 90 dB Frequency range: 100 Hz - 10 kHz Dimensions (D x H): 230 x 70 mm Mounting cutout: 195 mm ø Weight: 760 g
Ceiling-mount speaker white6.5" full-range speaker 100 V transformer with 3 power tapsABS plastic housing with metal front grilleFor speech and background music in indoor PA systemsInput voltage: 100 V Components: 16.5 cm speaker (6.5") Rated power: 1.25 W RMS (green) 2.5 W RMS (yellow) 5 W RMS (red) COM (black) Sensitivity (1 W/ 1 m): 90 dB Frequency range: 100 Hz - 10 kHz Dimensions (D x H): 230 x 70 mm Mounting cutout: 195 mm ø Weight: 760 g
OMNITRONIC CS-8 Ceiling mount speaker black 20 cm full range speaker (8") 100 V transformer with 3 power taps ABS plastic housing with metal front grille For speech and background music in indoor PA systems Input voltage: 100 V Components: 20 cm speaker (8") Rated power: 2.5 W RMS (green) 5 W RMS (yellow) 10 W RMS (red) COM (black) Sensitivity (1 W/m): 92 dB Frequency range: 50 Hz - 18 kHz Dimensions (D x D): 275 x 85 mm Mounting cutout: 235 mm ø Weight: 1.2 kg
OMNITRONIC CS-8 Ceiling mount speaker white20 cm full range speaker (8") 100 V transformer with 3 power taps ABS plastic housing with metal front grille For speech and background music in indoor PA systems Input voltage: 100 V Components: 20 cm speaker (8") Rated power: 2.5 W RMS (green) 5 W RMS (yellow) 10 W RMS (red) COM (black) Sensitivity (1 W/m): 92 dB Frequency range: 50 Hz - 18 kHz Dimensions (D x D): 275 x 85 mm Mounting cutout: 235 mm ø Weight: 1.2 kg
Weather-proof column speaker in aluminium cabinet (4 x 4"), with mount, 130 W RMSIntelligible voice and superior sound reproduction2-way system with 4 x 10 cm mid-woofer (4")Durable aluminum cabinet with grillePower selector switch with 8 ohms operating positionWith Mounting bracketSuitable for outdoor use IP56White aluminum grille with acoustic foamFor application areas such as: Installation; sports centres/gyms; multi-purpose hallPackage contents1 x top, 2 x angle, 1 x plug (male), 10 x washer, 4 x screw, 1 x user manualTECHNICAL SPECIFICATIONSIP classification: IP56Power: Program: 260WRated: 130W RMS (8 ohms)Rated: 120W RMS (100V PA)Frequency range: 120 - 18000 HzSensitivity: 94 dB (1W/1m)Max. SPL: 121 dBDispersion angle: 100° x 50°Impedance: 8 ohms; Public address systems 100VAttachment system: Mounting bracketPower tapping: 30W; 60W; 120W RMS via Selector switch switchableConnections: 2-pin screw plug connector (M) mounting version IPCrossover frequency: 1900 HzSpeaker: 4 x woofer 4" with ferrit magnetBasket material: aluminumVoice coil lows 1"Diaphragmmaterial: mylar1 x compression tweeter highs 1" with ferrit magnetVoice coil compression tweeter highs 1,4"Type of speaker: Column speakerType of construction: Closed BoxMaterial: AluminumColor: WhiteDimensions: Width: 12,7 cmDepth: 14,4 cmHeight: 70,4 cmWeight: 10,50 kg
•100 V technology with high-quality components for hifi soundUniversal wall speaker whiteMulti-step power selector: 5 W, 10 W, 20 W, 40 W, OFF2-way bass-reflex system for powerful bassWhite plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installationMovable mounting bracketConnection via screw terminalsFor indoor amplifying systems
1 line input (optionally XLR or 6.3 mm jack)1 feed-through output (optionally XLR or 6.3 mm jack)70 V, 100 V or 4-16 ohms operationMaster controlLED indicators for power, signal, clip and faultProtective circuits: over load, short circuit, turn-on delay, over heating, DC offset protectionLoad detection and power controlRack installationPower supply: 230 V AC, 50 HzOutput power: 120 W RMSOutput current: 1.7 A/ 70 V, 1.2 A/ 100 VSpeaker outputs: 70 V, 100 V or 4-16 ohmsInput connectors: XLR, 6.3 mm jack mounting socketOutput connectors: XLR, 6.3 mm jack mounting socketLine input: 800 mV, 10 kohmsDistortion: 0.5 %/ 1 kHzS/N ratio (line): 90 dBProtection: Overheat, overload, short-circuit, DC, softstartIndicators: Power, fault, clip, signalDimensions: 483 x 335 x 92 mmRack installation with 2 UWeight: 12,5 kgOutput power: 120 W RMSFrequency range: 60 - 16000 Hz
PAP-350 PA amplifier Omnitronic1 line input (optionally XLR or 6.3 mm jack)1 feed-through output (optionally XLR or 6.3 mm jack)70 V, 100 V or 4-16 ohms operationMaster controlLED indicators for power, signal, clip and faultProtective circuits: over load, short circuit, turn-on delay, over heating, DC offset protectionLoad detection and power controlPower supply: 230 V AC, 50 Hz ~ Output power: 350 W RMS Output current: 5 A/ 70 V, 3.5 A/ 100 V Speaker outputs: 70 V, 100 V or 4-16 ohms Input connectors: XLR, 6.3 mm jack mounting socket Output connectors: XLR, 6.3 mm jack mounting socket Line input: 300 mV, 10 kohms Frequency range: 80 Hz - 16 kHz Distortion: 0.5 %/ 1 kHz S/N ratio (line): 90 dB Protection: Overheat, overload, short-circuit, DC, softstart Indicators: Power, fault, clip, signal Rack installation with 2 U Dimensions: 483 x 385 x 92 mm Weight: 16 kg
€486.00*
delivery time 14 days
This website uses cookies to ensure the best experience possible. More information...