DM3 Series allow engineers to capture the on-stage sound accurately, without coloration, and then addcreative touch as required. It exemplifies a “less is more” design philosophy, utilizing a 9” touchscreenand a single Touch & Turn knob for managing most of the console’s operations. DM3 mixing consolesgive you the power and flexibility to DO MORE than ever imagined with a digital console this compact.9" touch screen9 motorized faders"Turn & Touch" controls18x18 USB 2.0 audio interface 96kHz8 exits6 x Mix Bus + 2 x FX + 2 x MatrixDAW Remote Feature (HUI)OSC support for installationsEditor app available for tablet (tablet not included)6 freely assignable buttons2 x 2 channel recording/playback via USB port8 effects + GEQ on the mix/stereo busDimensions (W x H x D): 320 x 140 x 455 mmWeight: 6.5kgIncludes Steinberg Cubase AI and VST Rack ElementsConnections:16 mic/line inputs (12 x XLR, 4 x combo XLR/jack 6.3 mm)8 line outputs XLRStereo headphone output: 6.3 mm jackUSB to hostUSBEthernet RJ45

For dLive S / C Class Mixer16 Mic / line inputs8 XLR outputsPhantom PowerPlug and PlayCompatible with CAT5e cables up to 100m in lengthWidth: 19"

DM3 Series allow engineers to capture the on-stage sound accurately, without coloration, and then addcreative touch as required. It exemplifies a “less is more” design philosophy, utilizing a 9” touchscreenand a single Touch & Turn knob for managing most of the console’s operations. DM3 mixing consolesgive you the power and flexibility to DO MORE than ever imagined with a digital console this compact.9" touch screen9 motorized faders"Turn & Touch" controls18x18 USB 2.0 audio interface 96kHz8 exits6 x Mix Bus + 2 x FX + 2 x MatrixDAW Remote Feature (HUI)OSC support for installationsEditor app available for tablet (tablet not included)16 x 16 DANTE Interface6 freely assignable buttons2 x 2 channel recording/playback via USB port8 effects + GEQ on the mix/stereo busDimensions (W x H x D): 320 x 140 x 455 mmWeight: 6.5kgIncludes Steinberg Cubase AI and VST Rack ElementsConnections:16 mic/line inputs (12 x XLR, 4 x combo XLR/jack 6.3 mm)8 line outputs XLRStereo headphone output: 6.3 mm jackUSB to hostUSBEthernet RJ45

Dante Audio Networking CardDesigned to help integrate dLive and Avantis into a wide range of live, install and broadcast scenarios, the Dante 64×64 audio networking card offers low latency, high channel count connectivity to Dante networks and devices using standard networking cabling and hardware.With 64 channels of bidirectional audio at 96kHz, the Dante 64×64 card is suitable for high channel digital splits between systems, for instance FOH and MON, whilst offering simultaneous multitrack recording via Dante Virtual Soundcard (available separately), with no compromise in audio quality.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Support for the AES67 standard allows interoperability with other AoIP protocols found in broadcast, install and live sound scenarios and simplifies audio transport between different systems.Compatibility with Dante Domain Manager (DDM) enables integration with large networks and transparent routing across subnets as well as robust security and authentication options.Features64 bidirectional channels of Dante I/O at 96kHz or 48kHzPrimary and Secondary audio ports for redundancy or switched operationDedicated Control Network port for configurationInternal Network Bridge switch to bridge the dLive/Avantis Control Network and the Dante Control NetworkMultitrack recording via Dante Virtual Soundcard (available separately)64 channels at 48kHz32 channels at 96kHzAES67 compatibleDante Domain Manager (DDM) readyUp to 5x superDANTE w/ dLive S Class / Up to 2x superDANTE w/ dLive C ClassPlug and play operationUse off the shelf network hardware

The Tio1608-D2 is a Dante-compatible I/O rack equipped with 16 mic/line inputs and 8 line outputs. It can remotely control the preamps of the TF and DM3 series consoles, allowing you to build a simple stage box system. The versatile Tio1608-D2 also supports 96kHz and is therefore just as perfect for use as an I/O rack in large installations with products such as the RIVAGE PM or DME7.characteristics• 2U size, 16 inputs and 8 outputs.• The Dante network protocol contributes to greater system scalability and flexibility• Easy configuration using the DM3's AUTO CONFIG function or the TF Series' QUICK CONFIG function• Features recallable D-PRE preamps• Dimensions (W x H x D): 480mm x 88mm x 364mm (18.9" x 3.5" x 14.4")• Net weight: 5.7 kg (12.6 lbs)

Mixer / Interface / Recorder / Controller10-channel mixer with built-in 12-track recorder and USB audio interfaceMixer features> Ten analogue inputs on six mono and two stereo channels >Eight mono mic inputs on XLR connectors with switchable phantom power (48 V) >Ultra-HDDA microphone preamps on inputs 1–6 >Eight channels can be used with high-impedance instruments like electric guitars/basses >Ten balanced line inputs (six mono, two stereo) >Multi-purpose stereo channel for input from mobile devices via Bluetooth or TRRS smartphone connector (CH 9/10) >Inserts on input channels 1 and 2 >Mix-minus function on smartphone mini-jack input> Two Aux outputs (monitor, effects) and two stereo outputs with independent master faders (Main, Sub)> Monitoring can be selected between PFL (pre-fader), AFL (after-fader) and SIP (solo-in-place)> Dedicated click output with tap tempo feature> One-knob compressor for all input channels> Three-band equalizer with sweepable mids for all input channels> Switchable low-cut filter (100 Hz) on each channel> Semi-parametric EQ with sweepable mid band for aux or main outputs> Built-in Bluetooth receiver for wireless playback> On-board effects processor > 16 effects types > Can be used on all input channels, aux busses, sub and main stereo bus > Can be turned on/off by an optional footswitch (Tascam RC-1F)> Compact 60-mm faders> 12-segment LED output level meters> XLR balanced outputs for main stereo bus> TRS balanced outputs for sub and aux outputs> Two headphones outputs with separate level controlsRecorder features> Tascam multi-track recording engine, uses SD cards as storage media (up to 512 GB)> Up to 12 tracks (10 input channels + stereo mix) can be recorded without the need for a computer> Recording/playback format: Linear PCM (WAV format, 44.1/48 kHz, 16/24 Bit)> Overdubbing, punch in/out recording> Multi-track playback for advanced live performance> Illuminated Play/Record/Stop buttons for better legibility in poorly lit environmentsAudio interface features> USB audio interface for use with Windows (ASIO) and Mac (Core Audio) computers> Transfer to computer: 12 channels (all 10 inputs + stereo mix)> Transfer from computer: 10 channels, assignable to each channel input> Audio resolution 44.1/48 kHz, 16/24 bit> USB MIDI interface function> Simple DAW control support via HUI/MCU protocol emulationOther features> MIDI input and output> Support for MIDI timecode (MTC) and MIDI clock output with song position pointer (SPP)> Simple and quick menu operation with multi-jog dialNew in firmware version 1.10> Vamp playback allows to automatically or manually repeat up to ten previously marked intervals per song> Metronome tempo can now also be changed with an audible click> Three volume options available for the accented note of the metronome click> New sound pattern with four bars for the count-inSupported Operating SystemsWindows 10 (November 2019 Update 1909), Windows 10 (May 2019 Update 1903), Windows 10 (October 2018 Update 1809), Windows 10 (April 2018 Update 1803), Windows 8.1, Windows 7MacmacOS Catalina (10.15), macOS Mojave (10.14), macOS High Sierra (10.13)iOS 13 / iPadOS, iOS 12, iOS 11Power supply: Tascam AC adapter (included, input voltage AC 100-240 V, 50/60 Hz)Dimensions (W×D×H): 343 × 360 × 99 mmWeight: 4.3 kgCurrent update: https://www.tascam.eu/en/downloads/Model+12

CQ-18T is the largest desktop mixer in the CQ range and is ideal for gigging bands, rehearsal spaces, home recording and streaming, speech applications and corporate AV.Mix Smarter. Work Faster. Sound Better.CQ takes our renowned processing and effects, adds exciting new assistive mixing tools, and packages it all up into our smallest, and most affordable, digital mixer series yet.CQ-18T FeaturesInputs: 8 XLR8 XLR/TRS Combi2 TRS (stereo)24×22 USB-B interface (48/96kHz)SD record/playback 24x22 (48kHz) / 16x16 (96kHz)Stereo USB record/playback with dedicated input channelStereo Bluetooth playback with dedicated input channelDual Footswitch connectionOutputs: 2 XLR (Main)6 TRS (Monitors)2 Assignable TRS headphone outputs4 FX engines3 Custom Rotaries3 Custom SoftKeys7" Capacitive touchscreen with associated rotary controlBuilt-in dual band 2.4G/5G AC Wi-Fi with auto channel selectDimensions (W x H x D): 346 x 88 x 242 mmWeight: 3kg

Yamaha RK DM3 Rack Adapter for DM3/DM3S

The DX Hub is a remote audio networking hub that can be connected to any Allen & Heath AHM-64, SQ or Avantis mixer via SLink, or any Avantis mixer or dLive system fitted with a gigaACE I/O module. It provides 4 DX Link ports each carrying 32×32 channels of 96kHz audio, that can be used to connect to DX expander units.Up to 2 DX expanders can be connected to each DX Link port allowing up to 128 remote inputs and 64 remote outputs to be added to the system.Multiple DX Hubs can be used for further expansion, or for dual redundancy (dLive only)

Analogue Mixer with Multi-Track Recorder and Audio InterfaceIntegrated audio interface for 16 channels (14 inputs + stereo sum)16-Track recording is possible in WAV/BWF format on SD/SDHC/SDXC cards up to 128 GB44.1-48 kHz16/24 Bit1-Button compressor for channels 1-8Switchable low-cut3-Band EQ with tunable mids for all mono channels4-Band EQ with tunable mids for sum and subgroupOverdubbingPunch in/outLC-Display12-Segment LED meterIntegrated effects processorSwitchable phantom power: +48 VAC 100 - 240 VBluetooth (V5)Rackmount kit available separatelyDimensions (W x H x D): 430 x 113 x 463 mmWeight: 7 kgConnectors:10 Microphone inputs: XLR2 Hi-Z instrument inputs: 6.3 mm jack12x Line inputs: 6.3 mm balanced jack2 Inserts: 6.3 mm jack (channel 1 and 2)Line input: 3.5 mm mini jack / 2x RCA2 Main outputs: XLR2 Sub outputs: 6.3 mm jack2 Monitor outputs: 6.3 mm jack2 Control room outputs: 6.3 mm jackStereo headphone output: 6.3 mm jackFoot switch input: 6.3 mm jackFX output: 6.3 mm jackUSB 2.0

Soundcraft Ui1212-channel digital mixing consoleTablet / Smartphone / PC controlledWith integrated stage box and DSPIntegrated Wi-Fi / EthernetSoundcraft Preamps and Soundcraft mixing algorithms Lexicon effectsDbx AFS2 feedback suppressionDigitech amp modeling2-Track USB Playback storable gain and + 48V status120 Band Realtime Analyzer (on inputs and outputs) Input channels with parametric 4-band EQ, gate, compressor, de-esser and high-pass filter3 Lexicon effect bus (reverb, delay, chorus)Output bus with 31-band graphic EQ and compressorUp to 10 devices simultaneously as remote (tablet, smartphone, PC)Compatible with iOS, Android, Windows, Mac OS, Linux (via HTML5)Including Ableton Live Lite 9Connections:8 mic / line inputs: 4x XLR, 4x XLR / jack combo2 Instrument Inputs: Jack2 RCA line inputs2-channel USB media player (MP3, WAV, AIFF playback)2 Main Outputs: XLR2 Aux Outputs: XLR2 stereo headphone outputs: jackDimensions: 85 x 177 x 320 mmWeight: 2.29 kg

Audio RackFor Allen & Heath Qu consoles24 XLR mic / line inputs12 XLR line outputs (L/R)Cat 5 outputsAviom monitor outputFormat: 19" / 3 UDimensions: 483 x 220 x 137 mmWeight: 5 kg

16 Mono inputs via XLR or jack with AnalogIQ preamps3 Stereo inputs via jack4 Stereo FX returns16 Busses12 Mix outputs: LR, Mono Mix 1-4, Stereo Mix 1-3AES Digital output4 FX Engines with iLive FX library4 Mute groupsMotor faderTrim, polarity, low cut, gate, insert, 4-band parametric EQ, compressor and delay on all inputsInsert, 4-band parametric EQ, graphic EQ, compressor and delay for main LR and mono mix outputsQu-Drive: Multitrack recording / playback direct to / from USB drive or hard driveTouchscreen 800 x 480Built-in signal generatordSNAKE Remote Audio PortUSB Audio streamingCompatible with ME Personal Mixing SystemDAW MIDI ControlDimensions: 440 x 500 x 186 mmWeight: 10 kgNew firmware version 1.9: Pro Factory microphone presets from Audio-Technica, Sennheiser und Shure, DAW control for Windows, new QU-Control App

THE MIXER THAT CHANGED THE RULESPortable 18 in / 14 out Digital Mixer with remote wireless controlQu-SB is an ultra-compact digital mixer which frees you to mix from anywhere in the venue and provides a smart, portable solution for performing bands and artists.Qu-SB is portable enough to carry under one arm and comes loaded with our highly acclaimed suite of FX emulations and dynamics, making it a smart replacement for an old analogue mixer and a rack full of outboard FX.Our Best-Selling Digital Mixing PlatformInputs: 16 Mono / 1 StereoExpandable to 32 mono / 3 stereoMixes: 4 Mono / 4 Stereo / LRExpandable to 4 Mono / 7 Stereo / LRMatrix: 2 Stereo32x32 USB Audio InterfaceComprehensive Channel Processing and FXRange of Remote ExpandersSuitable for:LiveStudioStreamingA/V InstallCorporate AudioDimensions: 436 x 175 x 162mm Weight: 4.5kg

Soundcraft Ui1616 Channel Digital Mixer (remote control via Tablet/Smartphone/PC) with build-in Stagebox and DSPintegrated WiFi / EthernetSoundcraft Preamps and Soundcraft Mixer AlgorithmsLexicon Effectsdbx AFS2 Feedback SuppressionDigitech Amp Modelling2 Track USB Playback and RecordingGain and +48V Status storable120 Band Realtime Analyzer (In- and OutputsInput Channels with 4-Band Parametric EQ, Gate, Compressor, De-Esser, HPF3x Lexicon Effect Bus (Reverb, Delay, Chorus)Output Bus with 31-Band Graphic EQCompressorup to 10 Units Remote Units simultaneous useable (Tablet, Smartphone, PC)compatible with iOS, Android, Windows, Mac OS, Linux (via HTML5)Connections: 12x Mic/Line Input (4x XLR, 8x Combo)2 Instrument-Input ¼" TR2x RCA Line-Input2 Channel USB Media Player (MP3, WAV, AIFF Playback)2 Channel USB Recording Direct to Memory2x Main-Out XLR4x Aux-Out XLR2x Stereo Headphone-Outincl. Ableton Live Lite 9

19" rack mountableWith 96 kHz FPGA processing17 faders / 6 layers12x stereo mixes (perfect for in-ear monitoring setups) + LR3x stereo matrix8x Internal stereo FX engines with stereo returnsDEEP processing enables the integration of plug-ins directly into the mixer inputs and mix channels7" Touch screenSLink port for remote audio networking64ch I/O port for audio networking32 x 32 USB audio interfaceSQ-Drive direct recording to USBAES outputChromatic channel meteringIntegrated LED illumination per faderDedicated physical controls8 assignable SoftKeysChannel LCD displaysCompatible with the ME 1 and ME-500, as well as Dante or Waves audio networking cardsDimensions: 440 x 514.9 x 198 mmWeight: 10.5 kg

Dante Audio Networking CardDesigned to help integrate dLive and Avantis into a wide range of live, install and broadcast scenarios, the Dante 128×128 audio networking card offers low latency, high channel count connectivity to Dante networks and devices using standard networking cabling and hardware.With 128 channels of bidirectional audio at 96kHz, the Dante 128×128 card is suitable for high channel digital splits between systems, for instance FOH and MON, whilst offering simultaneous multitrack recording via Dante Virtual Soundcard (available separately), with no compromise in audio quality.The front panel Primary and Secondary ports allow simultaneous connection to multiple Dante devices, or dual-cable redundancy with compatible hardware. A dedicated Control Network port is provided for configuration using Dante Controller software.Support for the AES67 standard allows interoperability with other AoIP protocols found in broadcast, install and live sound scenarios and simplifies audio transport between different systems.Compatibility with Dante Domain Manager (DDM) enables integration with large networks and transparent routing across subnets as well as robust security and authentication options.Features128 bidirectional channels of Dante I/O at 96kHz or 48kHzPrimary and Secondary audio ports for redundancy or switched operationDedicated Control Network port for configurationInternal Network Bridge switch to bridge the dLive/Avantis Control Network and the Dante Control NetworkMultitrack recording via Dante Virtual Soundcard (available separately)64 channels at 48kHz32 channels at 96kHzAES67 compatibleDante Domain Manager (DDM) readyUp to 5x superDANTE w/ dLive S Class / Up to 2x superDANTE w/ dLive C ClassPlug and play operationUse off the shelf network hardware

22-Channel Analogue Mixer with Recorder22 Channels - 12x mono and 5x stereoIntegrated 24 track recorderRecording on SD card with maximum 24 Bit / 48 kHzSimultaneous playback of 22 tracks possibleFunction as 24 channel USB audio interface3-Band EQ for Channels 1 - 20Compressor for channels 1 - 12Integrated effect processor3 Aux ways7-Band graphic EQ for master or aux/monitorBluetooth receiver for wireless stereo sources100 mm FaderIntegrated power supplyDimensions: 577 x 529 x 106 mmWeight: 10.4 kgConnections:16 XLR Microphone inputs with +48 V phantom power22 6.3 mm TRS line inputsXLR Stereo main output6.3 mm TRS Stereo sub output6.3 mm TRS Stereo control room output6.3 mm Stereo headphone output

Dante® module for SQ series mixersSQ Dante provides any SQ mixer with a full 64×64 channel, 96kHz or 48kHz interface to a Dante network. An SQ equipped with the Dante option card connects seamlessly to DT expanders, wireless systems, amplifiers, preamps and any other device on your Dante network, taking full advantage of the SQ's high-resolution 96kHz audio.The SQ Dante card can be switched between 96kHz or 48kHz to support Dante networks with either sample rate. The card not only simplifies system integration, but also enables digital splits and affordable multitrack recording directly to a computer.V2 - AHM-64 compatibleSQ Dante V2 shares all the features and specifications of the V1 module, with no differences for SQ users*, but the V2 module can also be installed and used in an AHM-64.features64×64 channel audio and control over a network96kHz or 48kHz operationMulti-channel recording/playback with Dante Virtual Soundcard*Two ports with redundancy and switch modeInternal Control Network BridgeLockable Ethercon connectorsDante domain manager readyAES67 compatibleV1 compatible with SQV2 compatible with SQ (V1.5+) and AHM-64

dLive/Avantis Audio Networking CardThe Waves V3 Audio Networking Card (M-DL-WAVES3) is one of several audio networking options that can be fitted to an Allen & Heath dLive or Avantis I/O Port. It provides a 128x128ch 48/96kHz interface to the Waves SoundGrid networking platform, for several applications including Waves plugin processing, audio distribution, and digital mic splitting. It also offers a super convenient way of recording 128 tracks of 96kHz audio, into a Windows or Mac computer, over a single CAT cable.SoundGrid is an Audio-over-Ethernet protocol developed by Waves for real-time professional audio applications. It provides a very low latency environment using standard Gigabit Ethernet networks. Plugin processing can be performed natively on a computer or on dedicated Waves servers.Go to the Waves website to learn more about Waves for the Allen & Heath platform, download further documentation, and follow the instructions to set up the hardware and software:http://www.waves.com/live-sound/allen-heath Features:128 in, 128 outSwitchable 48/96kHz sample rateWaves SoundGrid audio networkingMultitrack recording and playbackIntegrated 3-port Ethernet switch for connection of multiple devicesInput sharing with Waves V2 and V3 cards

Dante Audio ExpanderOperating at a sampling rate of 96 kHz / 48 kHzDesigned in the form of a portable stage boxEquipped with 16 Mic Preamps featuring XLR connectors with status LEDs for phantom powerOffers 8 XLR Line OutsComes with Dante Primary and Secondary Ports using EtherCon connectionsOperates in both redundant and switched modesAllows for direct access to the preamps from the dLive and SQ seriesIncludes robust rubber protective corners and a convenient carrying handleCompatible with AES67Ready for integration with Dante Domain ManagerAn optional 19-inch rack kit is availableDimensions (W x D x H): 399 x 189 x 182 mmWeight: 4.75 kg

The compact and portable DT20 converts two analogue inputs, via combo XLR-Jack, to two channels of Dante audio, enabling hassle-free connection of analogue sources to a Dante network for install and live applications.Dante Input Interface – 2 INDT20 is a compact 48kHz/96kHz Dante interface enabling convenient placement of 2 mic/line inputs wherever you need to get analogue audio into a Dante network.Ideal for both fixed installation and AV hire / live applications, DT20 can be used with any Dante-equipped Allen & Heath mixer or AHM system, as well as in third party Dante systems.Thanks to its compact format, DT20 can be easily mounted under a table, podium etc. for local mic connection – or rack-mounted wherever required – on stage, or at FoH.The unit can be PoE powered or powered via a DC 12V supply. Two versions are available: the standard DT20 with power supply and rubber feet, or the DT20-M which includes surface mounting ears (and no power supply).FeaturesDante input interface, 48kHz/96kHz2x combi mic/line inputsLocal gain control48V phantom power with LED indicatorPoE powered or DC 12VEtherCon connectorRugged aluminium boxOptional ears for surface mounting (included in DT20-M version)Optional rack mounting kit DT-RK19AES67 compatibleDante Domain Manager ready

CQ-12T is the smallest mixer in the CQ range and is ideal for home recording and streaming, band rehearsals, small gigs, and speech applications.Mix Smarter. Work Faster. Sound Better.CQ takes our renowned processing and effects, adds exciting new assistive mixing tools, and packages it all up into our smallest, and most affordable, digital mixer series yet.CQ-12T FeaturesInputs: 5 XLR5 XLR/TRS Combi2 TRS (stereo)16×16 USB-B interface (48/96kHz)16×16 SD record/playback (48/96kHz)Stereo USB record/playback with dedicated input channelStereo Bluetooth playback with dedicated input channelDual Footswitch connectionOutputs: 2 XLR (Main)6 TRS (Monitors)Assignable TRS headphone output2 FX engines3 Custom SoftKeys7" Capacitive touchscreen with associated rotary controlDimensions (W x H x D): 290 x 88 x 242 mmWeight: 2.4kg

dLive/Avantis audio networking cardThe gigaACE audio networking card (M-DL-GACE) is one of several audio networking options that can be fitted to any Allen & Heath dLive or Avantis I/O Port. It provides a 128x128ch 96kHz gigaACE point-to-point link to another dLive or Avantis mixing system. It also enables connection from a dLive system to the DX Hub or GX4816 expander.gigaACE is Allen & Heath’s proprietary protocol for transporting Audio and Control over Ethernet, using standard CAT cables. It allows very low latency and cable redundancy without any audio dropout. gigaACE can also tunnel the dLive/Avantis TCP/IP control network over the same connection, for example to enable control of either of the two systems by a single laptop.The gigaACE card offers a cost-effective and simple solution for digital split applications, replacing the copper multicore / analogue splitters of the past. In a typical FoH / Monitor configuration, the inputs of a dLive or Avantis system are sent to a second system where independent trim, processing and mixing is applied.gigaACE is a truly plug ‘n play protocol: no computer is required for the setup of gigaACE connections. Simply plug the cable between any two dLive/Avantis systems and set the patch and clock settings directly on the mixer.Features:128 in, 128 out96kHz sample rateUltra-low transport latency – 5 samples (52 us)Dual redundancySwitchable Control Network Bridge