Peripheral Equipments


Here you will find devices, controllers for adjusting and setting the audio signal and other accessories

TOPSELLER



Topseller

ART PDB Passive Direct Box
The PDB™ Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs.The PDB™ also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.PDB Applications:Electric guitar and bass pick up output signals – The high impedance signal from a guitar or bass guitar pickup is translated by the PDB™ into a low impedance balanced signal required by mixing consoles.Keyboards and line level signals – The PDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the PDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the PDB™ and then to the console (instead of a separate DI box for each keyboard).DJ console output signals – DJ mixers often supply only an unbalanced -10dB signal. The PDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables.Speaker level signals – The PDB’s ability to accept speaker level inputs from a power amplifier’s output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix.SpecificationsFrequency Response: 10 Hz – 50 kHz +/- 0.5dB @ +4dBuOutput Connections: 600 O XLR Output JackGround Lift: SwitchableInput Attenuation: Switchable (0dB, -20dB, -40dB)Instrument Input: 50k OParallel Link Jack: 50k ODimensions: 3" x 5" x 2"

€49.00*

Immediately available or ready for collection
Boss AB-2 2-Way Selector
PRACTICAL AND AFFORDABLE A/B SELECTORThe BOSS AB-2 is a practical helper when switching the equipment: you can, for example, switch two guitars in front of an amplifier. Or you can use the AB-2 to switch between two amps (or an amp and a tuner) with a guitar. Many guitarists are already familiar with the shape and size of the popular and proven BOSS footswitch FS-5U (silver) and the footswitch FS-5L (black).Switches either two inputs to one output or two outputs to one inputSwitching by active electronics: no switching clicksNo influence on the switched signals (-20 dBU inputs and outputs)Display of the switching status by red LED (Channel A) and yellow LED (Channel B)Current consumption only max. 5 mAPowered by 2x micro batteries (AAA size)Operating time with simple zinc-carbon batteries approx. 100 hours!Housing size as with the well-known BOSS FS-5U footswitches and BOSS FS-5L footswitchesCheap price!Nominal input level: -20 dBuNominal output level: -20 dBuControlPedalIndicators: A (red), B (yellow)Connectors: A jack, B jack, IN/OUT jackCurrent consumption: 5mA or less* Expected battery life for continuous use: Carbon: 100 hours* This value varies depending on the actual usage conditions.Power Supply: Dry battery [Type R03/LR03 (AAA)] x2Accessories: Instruction manual, dry battery [Type R03/LR03 (AAA)] x 2, number sticker

€52.00*

Immediately available or ready for collection
OMNITRONIC LH-061 PRO Passive Dual DI Box
Passive 2-channel DI box/splitter, blackPassive 2-channel DI box with split mode2 high-impedance signal inputs via two 6.3 mm jacks2 low-impedance XLR outputs2 feed-through outputs (6.3 mm jack)Converts 2 separate unbalanced line inputs (e.g. CD player, instruments) into 2 balanced XLR outputs, for connecting a mixerSwitchable input attenuation: 0 dB, -20 dB, -40 dBgroundlift selectorCables can be routed under the housingPackage contents1 x user manual, 1 x deviceTECHNICAL SPECIFICATIONSFrequency range: 15 - 30000 HzImpedance: Input: 50 kOhmOutput: 600 OhmInput attenuation: 0 dB, -20 dB, -40 dB; switchableConnections: Input: 2 x 6.3 mm jack socket (mono) mounting versionOutput: line via 2 x 3-pin XLRLink: 2 x 6.3 mm jack socket (mono) mounting versionMax. level: Output: +6 dBuDimensions: Width: 13,3 cmDepth: 11,5 cmHeight: 5,4 cmWeight: 610 g

€49.00*

delivery time 14 days
Bluetooth Ultimate Radio transmission system for active speakers Bluetooth
Bluetooth Ultimate is a stereo Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Ultimate, you can quickly and easily add stereo Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR inputs of a mixer or powered speaker setup, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Ultimates together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Ultimate running for over 6 hours. Bluetooth Ultimate is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerLink two together for cable-free stereo playback*Dual XLR outputs for wired stereo playback*100+ft rangeXLR on front and backUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Ultimate, or the Alto Professional Bluetooth Total 2, both sold separately. Original Bluetooth Total is not supported. Additional XLR cable not included.

€79.00*

Immediately available or ready for collection
RCF RDNet Control 8 8 output Master Unit
The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations. The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc. Data transfer can be routed also through the provided xlr connectors enabling the control of the system on traditional multi-cored cables.FEATURESETHERNET (REMOTE CONTROL) AND USB (DIRECT CONTROL) PC CONNECTION TO RDNETCONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICESALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECONDAUTO DETECT DEVICE PLACEMENTControlling slave devices status and functionsMonitoring and displaying faults and warnings sent from slave devicesStoring subnet user filters configuration in a removable memory cardGENERAL SPECIFICATIONSNumber of subnets: 8Connectors: RJ 45, XLRMax number of devices (for each subnet): 32Configuration: PC softwarePC connection: USB (type B), EthernetData storage: SD card (max. 4 GB)Operating voltage: 90-240 V~ 50/60HzPower consumption (W): 15RDNet: YesSTANDARD COMPLIANCECE compliance: YesPHYSICAL SPECIFICATIONSCabinet/Case Material: MetalColor: BlackRack mounting: 19", 1USIZEHeight: 44 mm / 1.73 inchesWidth: 482 mm / 18.98 inchesDepth: 182 mm / 7.17 inchesWeight: 2.71 kg / 5.97 lbs

€1,699.00*

Immediately available or ready for collection
Alto Stealth Wireless MK2 Audio
2-CHANNEL UHF RADIO SYSTEM FOR ACTIVE SPEAKERSAdds a wireless audio connection to any active speakerDual channel transmitter (x1) with two XLR+6.35mm TRS inputsSingle channel receiver (x2) with a 1/4" TRS output (per unit)Replaces up to 200 feet of console-to-system cablingReliable UHF frequency band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceExpand your system with the Stealth Wireless Expander Pack (sold separately)Technical specifications:Channel:Frequency Response: 50Hz - 17kHz, ±3dBFrequency range: 863-865 MHz (EU / UK) (depending on region)Channels: Up to 100+ selectable UHF frequency bands (depending on region)Wireless range: 61 metersBandwidth: 863-865MHz: 2MHzOscillation type: PLLFrequency Stability: ±0.005%Frequency Deviation: ±20kHzInputs: 2 XLR and 1/4" TRS combo inputsPower supply: 12V, 500mADimensions: (Width x Depth x Height) 180mm x 99mm x 35mmWeight: 302gRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g

€475.00*

delivery time 14 days
Alto Stealth Wireless Expander MK2 Kit
ADDITIONAL STEALTH WIRELESS MKII RECEIVERExpands your existing Stealth Wireless MKII systemSingle channel receiver with a 1/4" TRS output (per unit)Reliable UHF band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g

€149.00*

Immediately available or ready for collection
Omnitronic LH-045 microphone preamplifier
OMNITRONIC LH-045 Microphone 1-channel preamplifier 1 microphone, XLR (bal.) or 6.3 mm jack (unbal.) Gain control, 10 steps (6-50 dB) Phantom power can be switched on Clip LED 1 line output, XLR (bal.) or 6.3 mm (unbal.) Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedance: 10 kohms bal./unbal. Max. input level: +4 dB bal./+10 dB unbal. Gain: 50 dB XLR/44 dB jack T.H.D.: 0.01 % Frequency range: 25 Hz - 16 kHz S/N ratio: >75 dB Dimensions: 143 x 93 x 45 mm Weight: 350 g

€76.20*

delivery time 14 days
dbx DriveRack Venu360
Remote control via own network with Mac, iOS, Android or Windows devices3 Inputs: Analogue or AES6 OutputsRTA microphone connector on the frontAuto EQ function with external RTA measuring microphoneAFS Feedback EliminatorInput module with 31-band graphical EQ, 12-band parametric EQ, subharmonic synthesis, delay and noise gateOutput module with crossover for up to 6-way mono, 12-band auto-EQs, dbx compressors, automatic gain control, subharmonic synthesiser, noise gate, delay (up to 1000 ms per output) and alignment delayXLR input and outputEthernet portUSB portLED chain for each input and outputBody shape: 19"/ 1URTA microphone optional (not included)Tested routers: Dlink 636L, Dlink Cloud router 2000, Cisco / Linksys: WRT54G2V1, Netgear WGR614 v7, Netgear WNR 1000

€1,199.00*

Immediately available or ready for collection
QPRO Audio QLM 4.8 Digital loudspeaker controller 4in/8out
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 4 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 8 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 96kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:

€1,299.00*

Immediately available or ready for collection
LH-053 DI-Box passive
Passive DI box1 high-impedance signal input, 6.3 mm jack1 low-impedance XLR output1 instrument feed-through output, 6.3 mm jackConverts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dBGround-lift switch eliminates signal interference and ground loop problemsRugged black metal housingFrequency range: 15 Hz - 30 kHz Input impedance: 50 kohms Output impedance: 600 ohms S/N ratio: >95 dB Input connector: 6.3 mm jack, unbal. Output connectors: XLR, bal. 6.3 mm jack, unbal. (parallel out) Dimensions: 127 x 74 x 45 mm Weight: 430 g

€21.00*

delivery time 14 days
DBX 266 XS Stereo-Kompressor/Gate
DBX 266 XS stereo compressor/gate with integrated PSUOver Easy function (automatic attack and release), Compressor-Ratio "1:1 - 4:1",XLR in/out, -10/+4dB switchablestereo link19", 1U

€159.00*

delivery time 14 days
ART dual X direct active di box
ART Dualxdirect Active Dual DI Box - fully active design, 18-48V phantom powered or 9V battery powered, converts high-impedance balanced/unbalanced inputs into 600 Ohms balanced outputs, switchable input attenuation (0, -30dB), switchable ground lift, 1/4" TRS/XLR combo connector inputs, balanced XLR outputs, rugged extruded aluminium case. Frequency response: 10Hz-100kHz ± 0.5dB @ +0dBu. THD: 100dB (typical). Channel separation: > 80dB (typical). Maximum input level: +4, +34dBu. Maximum output level: +6dBu (battery powered), +14dBu (phantom powered). Input connections: 1/4" TRS/XLR female balanced/unbalanced (x2), 470k Ohms. Thru connections: 1/4" TRS (2). Output connections: XLR male balanced (x2), < 600 Ohms. Input Attenuation: Switchable, (0, -30 dB), Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel), Dimensions: 99 x 117 x 47mm. Weight: 0.38kg

€77.00*

Immediately available or ready for collection
ART EQ351 Equalizer
1-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 1 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg

€189.00*

delivery time 14 days
ART dual PWM limiter
2-Channel dynamic processorStereo link function of the channelsAdjustable attack and releaseBypass switch per channelGain reduction LED2x Line inputs: XLR and jack, balanced 6.3 mm2x Line outputs: XLR and jack, balanced 6.3 mm2 Loop inputs: 6.3 mm jackDesign: 19" / 1UDimensions (W x H x D): 482.6 x 44.5 x 150 mmWeight: 2.1 kg

€248.00*

delivery time 14 days
Denon Pro DN-200BR Stereo Bluetooth® Audio Receiver
Balanced XLR and 6.3 mm jack outputsUp to 33 m rangeBluetooth receiverSolid high-quality product for installations

€129.00*

Immediately available or ready for collection
Dbx ZC6-EU Wall mounted Zone Controller
Wall-Mounted Zone ControllerPush Button Up/Down ControllerUP / DOWN function for volume etc. of the ZonePro series.Connection ivia CAT5 cable with RJ-45 plug.

€83.00*

delivery time 14 days
dbx DriveRack 4820
48 and 96 kHz operationColor QVGA Display4 analog and AES/EBU inputs8 analog and AES/EBU outputsOptional CobraNet I/OOptional Jensen® I/O TransformersFull Bandpass Filter, Crossover andRouting Configurations with Bessel,Butterworth, and Linkwitz-Riley filters31-Band Graphic and 9-bandParametric EQ on every input6-band Parametric EQ on every outputLoudspeaker Cluster and DriverAlignment DelaysSelectable DSP inserts on all inputsand outputs including Classic dbxCompression, Limiting and AdvancedFeedback Suppression among othersEthernet networking controldbx ZC wall panel control

€3,759.00*

delivery time 14 days
dbx CT3 Advance Cable Tester
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.Recommended for: Studio, Tour, Portable. FeaturesTests up to 8-pin cables2 piece chassis for testing installed cablesTest Tone GeneratorAllows connection between different format connectors with ease‘Banana’ connector continuity tester with beeper and LED indicatorSuper-rugged construction for durability and longer life(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections(2) BNC connectors for testing of 2 pin->to pin connections(2) RCA Phono connectors for testing of 2 pin->to pin connections(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections(2) Speaker Twist connectors for testing of 4 pin->to pin connections(2) Banana connectors for testing of 1 pin->to pin connections(2) 1/4" (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections(2) RJ45 connectors for testing of 8P8C modular connections(2) 1/8" (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections

€205.00*

Immediately available or ready for collection
ART Z-Direct passive DI BOX
Passive DI BoxFrequency range: 10 Hz -50 kHzTHD: 0.01% Typical @ 1 kHzInput: unbalanced jackInput impedance 50 OhmOutput: XLR maleOutput impedance 600 OhmSwitchable low pass filter -3 dB @ 30 kHzPAD switch (0dB, -20dB, -40dB)Phase switch (normal / invert)Switchable ground liftDimensions: 44.5 x 107 x 89 mmWeight: approx. 340 g

€42.00*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails