LED technology and LED lighting include all installation lighting in restaurants, bars or at home as well as LED strips for indirect or direct lighting, for example. in the kitchen or at the bar or LED panels; With their inconspicuous modern design, these ensure a beautiful, wide, smooth light in the room.
LED RGBWW Stripes with a high light yield low power consumption. IP67Input: DC 24VBeam angle: 120°SMD LED: 300 /5mPower: 96 Watt/5mall 6 LED separablered 120 Lumengreen 300 Lumenblue 110 Lumenwarmwhite 400 Lumensize: 12 x 5000 mm
Designed with 5 channels output, and Max. 6A current per channel, up to 720W output powerEasy operation with LED screen and the touch buttons.Support 3 kinds of DMX ports : 3-pin XLR, RJ45, green terminal.With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting,equipment recognition, etc.With short circuit protection and over current protection, as well as warning function when fault.With fast self-testing function.High/low PWM frequency for optional.LOW 500 Hz / High 4000 Hz16bit (65536 levels) / 8bit (256 levels) grey level optional.Technical Specs:Input signal DMX512/RDMInput voltage DC12V~DC24VMax load current 6A x 5CH Max. 30AMax output power (0~72W...144W) x5CH Max. 720WDMX512 socket 3-pin XLR, RJ45, green terminalGray scale level 8bit(256 levels)/16bit(65536 levels)Working temperature -30°C~65°CDimension L169×W80×H39mmPackage Size L182×W91×H41mmWeight (G.W) 550g
Universal DMX-512 splitter. They are designed to distribute the incoming DMX signal in series to several separate outputs with an additional "trough" connection. It has clear LEDs that indicate the DMX signal status of each output and input.DMX splitter for 3 outputsDMX display LEDs on inputs and outputs3 XLR outputsDimensions: 80 x 41 x 192 mmWeight: 0.56 kg
30 super bright SMD 5050 yellow LEDs excellent quality used with 120 ° viewing angle per meter of the LED strip. Here, the LED Strip can be separated every 16,66 cm. The LED stripe is provided with a self-adhesive strip (3M 300 adhesive tape) on the back.LED Stripes can be used without difficulty by the very comfortable size at almost any location, such as the LED illumination of kitchens, bathrooms, in the living room but also in restaurants and many more places that are flexible depending on the purpose and situation to your color requirements should be adjusted.Our LED strips are supplied with a 15cm long cable.The connection is made directly to 24V or appropriate control systems.Technical specifications:yellow LED StripeSMD Stripe with 150 bright 5050SMD LEDsadhesive backingshortened always by 16,66cmLength: 500 cm / - only 2.0mm highWidth: 10mmvery flexiblecommon plusPower: 7,2 W / mDC24V version: can work with DC20V to DC28V InputLuminous flux: 220 lumens per meterProtection: IP54 single-sided glued with siliconeCertificates: UL, CUL, CE, RoHS
The new EX LED Controller unite finally all the features that guarantee multifunctional operation and easy installation of a LED screen controller.The EX LED controller is available in three versions, a 1-channel dimming controller (EX-5), as a 2-channel version for WW / CW applications (EX-7) and the 4-channel version for RGBW applications (EX -8th). All models LTECH EX series, while enjoying the 4 zones (spaces) which can be controlled separately. The EX series is both a DMX signal to digital cabling to the recipients, as well as RF radio signals (2.4GHz) for wireless connection to the recipients from. Another highlight, the EX controller can be directly connected to the 230V mains, it eliminates the hassle of wiring a 12V line toward the wall controller. The EX series is the ideal solution for post-to-install LED controllers. Simply the wall controller in the existing flush box set and connect it to the 230V household power, place the wireless receiver near the LED lights, finished. The elegant design with the touch-sensitive glass surface make the EX controller in addition to the real eye-catcher in any room.Technical specifications:4 zones à. 4 channels (RGBW)each is individually adjustable zoneeach is individually dimmable ZoneOutput: DMX + radio (RF / 2.4GHz)LED Wall Controller Controller with the latest digital technologyRGB + W technique allows a choice of over 100 million colors (!)Noble glass surface with touch-sensitive keys and wheelprogrammed 11 different modes (color + gradients)Flow rate of the programs possibleT-PWM technology causes an almost perfect dimmingmultiple controllers can be operated in parallelLED status indicator (on / off) + acoustic signalvery high quality workmanship and an elegant designPower Supply: AC 230V ~Dimensions: 86 x 86 x 36 mmColor whiteWeight: 225g
SMD LED Panel Pendant lamp Wall lamp Ceiling lamp 21 W 30 x 60 120 °advantages:-extremely flat: only 10 mm-does not get hot-no additional cooling required -homogeneous light distribution -Innovative design with filigree aluminum frame Efficiency: up to 90% energy saving Longevity: life of up to 50,000 hours-no flickering and no warm-up time, lights up immediately when switched on-no harmful substances such as mercury -No electric wave, no interference -No UV or IR radiation Environmentally friendly: besides the sunlight we have the most environmentally friendly light sourceBrand BluelightProtection class: IP20Height 10 mmLength 60 cmWidth 30 cmStyle ModernColor Warm WhiteDelivery SMD LED panel light wall ceiling light 21 W 30x60 120 °24 Volt0-100% dimmable flickerfreeApplication: for use in enclosed spacesProduct Features LED pendant lightPower: 21 Watt LED quantity: 112Beam angle: 120 °, homogeneous light distributionScreen Material Stainless SteelLamp DetailsPower consumption 21 watts
Four Group RGBW ReceiverSupply voltage: DC12V/DC24VConnecting mode: common anodeOutput: 4 channelsRated output current: 6A (each channel)Wireless frequency: 2.4 G MHz
Switching power supply for LED 24V/2,5A IP 65Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 2,5 AOutput power 60 W, working voltage adjustable approx. 10,8 - 13,2 VInput voltage 88 - 264 VACFrequency 47-63 Hz, 1,5A / 230 VACConnection: terminal screwSize: 159 x 97 x 38 mm
30 super bright SMD 5050 red LEDs excellent quality used with 120 ° viewing angle per meter of the LED strip. Here, the LED Strip can be separated every 16,66 cm. The LED stripe is provided with a self-adhesive strip (3M 300 adhesive tape) on the back.LED Stripes can be used without difficulty by the very comfortable size at almost any location, such as the LED illumination of kitchens, bathrooms, in the living room but also in restaurants and many more places that are flexible depending on the purpose and situation to your color requirements should be adjusted.Our LED strips are supplied with a 15cm long cable.The connection is made directly to 24V or appropriate control systems.Technical specifications:red LED StripeSMD Stripe with 150 bright 5050SMD LEDsadhesive backingshortened always to 16,66 cmLength: 500 cm / - only 2.0mm highWidth: 10mmvery flexiblecommon plusPower: 7,2 W / mDC24V version: can work with DC20V to DC28V InputLuminous flux: 230 lumens per meterProtection: IP54 single-sided glued with siliconeCertificates: UL, CUL, CE, RoHS
The new DX LED Controller unite finally all the features that guarantee multifunctional operation and easy installation of a LED screen controller.The DX LED controller is available in three versions, a 1-channel dimming controller (DX-5), as a 2-channel version for WW / CW applications (DX-7) and the 4-channel version for RGBW applications (DX -8th). All models in the DX series, while enjoying the 4 zones (spaces) which can be controlled separately. The DX series is both a DMX signal to digital cabling to the recipients, as well as RF radio signals (2.4GHz) for wireless connection to the recipients from. Another highlight, the DX controller can be directly connected to the 230V mains, it eliminates the hassle of wiring a 12V line toward the wall controller. The DX series is the ideal solution for post-to-install LED controllers. Simply the wall controller in the existing flush box set and connect it to the 230V household power, place the wireless receiver near the LED lights, finished. The elegant design with the touch-sensitive glass surface make the DX controller in addition to the real eye-catcher in any room.Technical specifications:4 zones à. 1 channel (dimming)each is individually adjustable zoneeach is individually dimmable ZoneOutput: DMX + radio (RF / 2.4GHz)LED Wall Controller Controller with the latest digital technologyDimming with 4096 steps (!)Noble glass surface with touch-sensitive keys and wheel3 brightness levels can be storedT-PWM technology causes an almost perfect dimmingmultiple controllers can be operated in parallelLED status indicator (on / off) + acoustic signalvery high quality workmanship and an elegant designPower Supply: AC 230V ~Dimensions: 86 x 86 x 36 mmColor whiteWeight: 225gsuitable for 86mm wall outlets
We offer high quality LED stripes with rich colors, color mixtures and pleasant white tones. The strip is on a 5m roll, which can be cut every 25cm. They are self-adhesive, so laying is greatly simplified. For the LED stripes there are additional profiles / rails to visually embellish the installation in living rooms (-> category 'LED accessories and spare parts')
LED Panels
LED panels are modern, flat, inconspicuous lighting fixtures, perfectly suited for seminar rooms, offices or living rooms where a wide, pleasant light is preferred. They are available in different sizes, in white-light or RGB color mixing. Optionally, there is a suitable mounting set for ceiling mounting or suspended from ropes.
LED Power Supplies
An LED switching power supply is required to operate the LED lighting. Depending on the power of the LED light, the right power supply unit must be selected. The outdoor version offers quieter and fanless switching power supplies.
This website uses cookies to ensure the best experience possible. More information...
