Light Controllers


Here you will find everything you need to control your lighting. From mixers, software, simple controllers as well as dimming and switch packs.

TOPSELLER



Topseller

Lite Puter DP-7F Interface / DMX Modul für DX-1228

€399.00*

Delivery time from 8 to 10 weeks!
DP-2401 24 Channel DMX Switch Pack
Lite Puter DMX-24 Channel Switch Pack1 A per channel, on/off switch on front panelAble to set buffer tie between actions of different channels (0 sec.-4 min.)Action delay protection function (0 sec.-30 min.)Manual or DMX on/off control for the scenesStatus indicator LED for each channels (different colour under different status)Being attached with the signal input, the machine can control the channels through the standard DMX signalEvery channel has 3 points of terminal port, including NC (normal close), C (common) and No (normal open) dry contacts The current through each contact cannot exceed 1 A (220V)Size: a U 19", weight: 2,5 kg

€568.00*

Immediately available or ready for collection
P-27 dimmer moduls for DX-1220
P-27 Dimmer Module for DX-1220

€129.00*

Immediately available or ready for collection
Sunlite Easy Stand Alone SLESA U11 white
intuitive lighting control solutionThe new SLESA-U11 is built on the latest generation of lighting controllers from Nicolaudie Architectural and combines all our recent innovations.Programmable with ESA Pro 2 software or with Arcolis, the SLESA-U11 features the new Nicolaudie Stand Alone engine (NSA) offering some great possibilities (multi-zone, extended triggers, 16-bit channels management...) and an intuitive backlit keyboard with 10 presets.Thanks to its Ethernet connection, the SLESA-U11 can be controlled from our Easy Remote Pro or LightPad applications.main featuresProgrammable with ESA Pro 2ESA Pro 2 is our latest generation of programming software. Available for Mac and Windows, this is the perfect complement to the SLESA-U11 controller: pixel mapping, triggering management, patch configuration, everything is available with a few mouse clics. The only limit is your imagination.New Stand Alone EngineThe new Nicolaudie Architectural engine (NSA) offers great possibilities for the control of your lighting installation: multi-zone, extended triggers, 16-bit channels management, full recovery after power lose, and more...Extended triggering possibilitiesTriggers are very important for lighting control. The SLESA-U11 offers multiple possibilities to trigger your lighting scenes: time/date, input ports, TCP/UDP commands.In combination with ESA Pro 2 software the SLESA-U11 offers a lot more than just assigning a trigger to a scene. Each trigger is made of an event and conditions. The programmer can define a specific conditional procedure for each trigger to perfectly fit the most demanding lighting installations.Intuitive backlit keyboard with 10 presetsEasy access to your scenesEach of the 13 buttons on the SIUDI-11 have been placed for maximum ease of use. The ABC button allows you to cycle between each of the 5 zones. The arrow buttons allow you to cycle through your scenes (99 total). The first 10 scenes of each zone are backlit for a user friendly experience.Dimensions: 160 x 90 x 45mmWeight: 268gUSB connectionEthernet connectionDMX channels: 1024 (expendable to 2048)RDMMemory capacity:micro SDStand AloneNumber of scenes: 99Number of zones: 5Power voltage: 5-5.5V DCPower connector: USB Type-CTriggeringPorts:16Clock/calendar triggersEthernet integrationRemote control apps: iOS/AndroidProgramming software/appESA2: PC/MacESA Pro 2: PC/MacArcolisi: OS/Android

€718.80*

Immediately available or ready for collection
Nicolaudie DINA DR1 DIN rail mounted Controller
DIN rail mounted lighting controllerThe DINA-DR1 is the latest lighting control solution from Nicolaudie Architectural. Our talented R&D team has worked a lot to design this all-in-one controller featuring multiple output protocols, triggering and integration facilities, programmable memory for dynamic lighting sequences, remote control...Robust, powerful and scalable solutionDesigned to lastDesigned for din-rail mounting, the DR1 is a strong and durable solution for fixed lighting installations. Up to 3072 channels (1024 RGB or 768 RGBW fixtures) can be controlled over several protocols : DMX 512, Art-Net or SACN, LED Pixel, DALI. Multiple controllers can be connected and synchronised for large-scale lighting installation.Built on the NSA (New Stand Alone) engine, the DR1 offers multi-zone show control as well as advanced and flexible triggering and integration possibilities: Time, Audio, Ports, RS232, TCP, DALI...This is the first lighting controller offering an all-in-one solution with multiple protocols. The DR1 can output DMX, Art-Net, SACN, DALI, LED pixel and create a control gateway for the most demanding dynamic lighting installations.There is nothing easier than programming the DINA-DR1: connect the controller to your computer (PC or Mac) over USB/Ethernet and start the ESA2 or ESA Pro2 software. No computer available? No problem, connect the DINA-DR1 to the local network and use the on-site programming app Arcolis to program the device with your smartphone or tablet.Programmable with ESA Pro 2ESA Pro 2 is our latest generation of programming software. Available for Mac and Windows, this is the perfect complement to the DINA-DR1 controller: pixel mapping, triggering management, patch configuration, everything is available with a few mouse clics. The only limit is your imagination.New Stand Alone EngineThe new Nicolaudie Architectural engine (NSA) offers great possibilities for the control of your lighting installation: multi-zone, extended triggers, multiple output protocols, 16-bit channels management, full recovery after power lose, and more...Extended triggering possibilitiesTriggers are very important for lighting control. The DINA-DR1 offers multiple possibilities to trigger your lighting scenes: time/date, input ports, RS232, TCP/UDP commands, DALI...In combination with ESA Pro 2 software the DR1 offers a lot more than just assigning a trigger to a scene. Each trigger is made of an event and conditions. The programmer can define a specific conditional procedure for each trigger to perfectly fit the most demanding lighting installations.Multiple output protocolsA total of 3072 channels (1024 RGB or 768 RGBW devices) can be individually controlled by the DINA-DR1. If most of the installations will use the 6 DMX outputs, it is also possible to drive the 3072 channels over different protocols and connectors: eDMX (Art-Net, SACN) through the RJ45 connector or LED Pixel (2 output connections).ScalableSeveral DINA-DR1 lighting controllers can be linked together on a standard local network to extend the number of channels (e.g. 4 linked DINA-DR1 would make it possible to control 4x3072=12288 channels and so on...).Compatible with LS CloudLS Cloud is a secure web service offered by Nicolaudie Architectural to manage your lighting controller from anywhere in the world, at anytime. With this new service, you can modify the programming of an installed DINA-DR1 directly from your office, manage the hardware settings, update the product firmware...specificationsGeneralDimensions: 160 x 91 x 62 mmWeight: 317gUSB connectionEthernet connectionDMX channels: 3072 (DMX, eDMX, LED Pixel)scalableRDMLED Pixel outputeDMX (Art-Net, SACN)DaliMemory capacity: 16MBMicro SD cardLS CloudStand aloneNumber of scenes: 20Number of zones: 20Power voltage: 8-15V DCPower connector: Screw terminalwith din Rail power supplyTriggeringPorts: 8Clock/calendar triggersRS232Ethernet integrationAudioDaliRemote control apps: iOS/AndroidProgramming software/appESA2: PC/MacESA Pro 2: PC/MacArcolis: iOS/Android

€2,398.80*

Immediately available or ready for collection
ADJ DMX Operator 1
- Reliable DMX Controller- Programmable Up To 240 Scenes- 192 DMX Channels- 12 Individual Fixture Channels- 8 Dimmer Faders- Easy To Use- MIDI ControllableSpecifications- An affordable solution for controlling DMX products- Control up to192 DMX channels- Programmable up to 240 scenes- 12 individual fixture channels - Control up to 12 separate intelligent lights with up to 16 DMX channels per fixture- Fixtures with less than 16 DMX channels may be combined on 1 DMX scanner button- Record up to 6 programmable chases with fade time and speeds- 8 individual faders provide easy programmability for Intelligent Lighting or Dimmer Packs- MIDI controllable- DMX-512, 3-pin XLR signal- Built-in Microphone- Remote control: Blackout controlled by MIDI input signal- Blind function - override chases on the fly- Use in conjunction with the ELP-DMX20 or the ELD-DMX20- Polarity switch to accommodate different types of cable requirements- Power input: DC 9V-12V, 220 mA min. power supply included- Dimensions: 5.25" x 19" x 2.5" (133 x 483 x 64 mm) 19 in. rack mount - 3 rack spaces- Weight: 5 lbs (2.3 kgs)- Voltage: 120V/220V

€119.00*

Immediately available or ready for collection
powersupply for TFExtSDJ1 MediaOperator MicroPhase 6VDC1,75A

€9.90*

Immediately available or ready for collection
LED DJ Minilight with XLR 4-pin. connection
Gooseneck Light with XLR 4-PIN connector · 4 COB LEDs · Gooseneck Length : 300 nmm· on/ off switch · Colour temperature: 6000 to 6500K · Colour of LEDs: white · Powersupply via XLR 4-PIN connector · Pin assignment: XLR pins 1 and 2 not connected, pin 3 = ground, pin 4 = +

€19.90*

delivery time 14 days
AC/DC adapter, EU plug - USB connector
Input: 100-240V max. 1 x USB ports, 5VOutput: USB-port 1ACompatible with the SIUDI7A, SIUDI8A und SUIDI9A

€14.99*

Immediately available or ready for collection
DMX 6-channel modular dimmer pack
6 x 30 A power current dimmer, DMX-512, pre heat function 0 - 6%, self test, adjustable square or linear dimmer curve, individual channel selection, stabelized dimmer out, automat. over heat protection, 19", size: 482x176x260 mm, weight: 20 kg

€968.09*

Immediately available or ready for collection
IC for DX-1220 Lite Puter

€22.80*

Delivery time from 8 to 10 weeks!
ADJ MyDMX RM
ADJ’s myDMX 3.0 is a multi-platform DMX control software/hardware system (Windows and OSX Mac compatible). myDMX 3.0RM has a new, robust, 19” rack mount, hardware dongle and exciting new features to take greater command of your light show. myDMX 3.0RM allows you to program your light show with myDMX 3.0 software, upload programmed data to myDMX 3.0RM then playback straight from myDMX 3.0RM in stand-alone mode without a computer. This is the ideal control solution for clubs, bars, schools and event venues where you want to make it as simple as possible. Out of the package, myDMX 3.0 software will run in Express Mode; 512 “Live” DMX channels & 512 “Stand Alone” DMX channels (No 3D visualizer, Easy Remote or Midi features).myDMX 3RM is a great solution for a lighting designer to leave at a venue so that their staff can trigger lighting scenes without the use of a computer or myDMX software.Features (Some features listed below require myDMX 3.0RM to be connected to a computer):16 Assignable port triggersArrange scenes into groupsSound-light with BPM audio analysis and pulse analysisLive snapshotsLive scene dimming and scene speed controlsBPM tapFlash scenesBlind editing - edit scenes without outputting the DMXFully compatible with myDMX 2.1 softwareEasy-to-use DMX software 512 Live DMX channels512 Stand-Alone channelsExtensive fixture profile librarySSL2 Profile editor & supportDrag and drop effects generatorWorks with simple scenes/stepsWindows and Mac installers that will download the latest ssl library with an internet connection upon install. Maintenance” application that installs with the program to check for component updates or new versions of the software.Cloud search for profiles” Search for the latest and greatest fixture profiles from within the program itself, no more hunting through dropboxImproved multi Pan and Tilt supportUsers can select multi select steps in a scene and modify a channel parameter without it interfering with the rest of the channels Vast optimizations and stability improvements for both Windows and Mac OSNot compatible with ARM based Windows tablets (only Intel)Additional features and software upgrades available at https://store.dmxsoft.com/Minimum System Requirements:Computer working under Windows 7 or higher, or MAC OS X 10.10 or higher1 GHz speed processor2 GB Memory (RAM)1280*768 pixel screenOpenGL 3.1 (for 3D)Best Performance System Requirements:Computer working under Windows 7 or higher, or MAC OSx 10.10 or higher2 GHz speed processor, dual core4 GB Memory (RAM)Video card with 1GB video memory1920*1080 pixel screenOpenGL 3.1 (for 3D)

€228.00*

delivery time 10 days
Tip
Daslight Light Rider Wifi DMX Interface
Daslight Light Rider Wifi DMX InterfaceTablet-based DMX controlintuitive operating concept allows quick access to all functions and simplifies usefree App "Light Rider" for iOS, Android and Amazon Fire Tabletperfect for DJs thanks to beat synchronization via Ableton Linkcompatible with popular DJ softwareThe tablet is connected via W-Lan to the interface and can thus control up to 512 DMX channels via the appmemory storage for presetseight retrievable movements and chasesthe movement radius for Movingheads and scanners can be easily adapted to the room, keys for fog machine, blind, blackout, freeze, and strobe, speed and brightness can be customizedDMX output: XLR 3-pinpower supply via USB-C (power adapter not included)

€249.00*

Immediately available or ready for collection
Ehrlich wireless DMX Transmitter (transmitter/receiver)
DMX transceiver (transmitter/receiver

€99.00*

Delivery time from 10 to 12 weeks!
Lite Puter DP-82II DMX Mix Panel 8 x Input to 1 x Output
Lite Puter DP-82II DMX Mix Panel allows the mixing of 8 different DMX sources to one total signal, chooses the highest signal of the 8 inputs and passes it on to the output, 1 U, 8x input 5 pin DMX plugs male to 1 x output 5 pin DMX plug female,size: 482mm(1 U)x44mm(19")x133mm weight:1,16 kg

€564.00*

Immediately available or ready for collection
ADJ Airstream IR
The Next Generation of Lighting Control. Airstream IR is an IR adapter that plugs into the phone output of any iPad/iPhone to control a variety of ADJ lighting fixtures. Sold in a set of 4 adapters.Requires Airstream IR app (free download in the Apple App store). Compatible with iOS devices (iPad & iPhone). - Set of 4 IR adapters for iOS devices- Easy Control of fixtures- Wireless infrared signal! (No Cables!)- Download the Airstream IR App for free in the Apple App Store- When using the App and IR adapter, make sure headphone volume is turned all the way up- iPhone or iPad sold separately WIRELESS INFRARED CONTROL UP TO 15-20 FEET:- Sound Active- Black Out (Stand by)- Full On- Fade / GOBO / Pattern- Dimmer- Strobe- Color Change- Show Selection- Strobe- Speed- Auto Fast/Slow- R/G/B- Random Currently compatible with:Inno Pocket Spot Inno Pocket Spot PearlInno Pocket Scan Inno Pocket RollInno Pocket Wash Inno Pocket FusionInno Pocket Spot Twins Inno Pocket Z4Inno Pocket Beam Q4Gobo Projector IRIkon IRH2O IRH2O DMX IRRicochet ON-XWarlock KAOSPAR Z4RotoBeam 4Pinspot LED QUAD DMXSuper Spot LEDMonster FunMonster DuoMonster Quad More compatible products coming soon!Download Airstream IR APP for free in the AppStore

€7.90*

Immediately available or ready for collection
Sunlite Suite 3 Basic Class lighting software
The best Sunlite package everFeaturing 256 DMX channels, the new SUNLITE-BC includes SUT (Smart Upgrade Technology) and is upgradable to 512 channels or more using the optional Art-Net universes.Here are the main new features:- attractive price- new 2017 design- USB type C connector- Standalone mode only for ESA, ESA2- Smart Upgrade Technology (SUT)- Compatible with ESA1, Sunlite Suite 2 and 3 software

€189.00*

Immediately available or ready for collection
Lite Puter DP41 4 Channel DMX Merger
Lite Puter 4 Channel Merger, 4 DMX In / 1 DMX Out

€324.00*

Delivery time from 4 to 6 weeks!
Lite Puter DX-626 6-channel dimming pack DMX 512, 6 x 25 A
Single channel controll with fader, linear dimmer curve, pre-heat function (0-6%), automat. cooling control system and over heat protection, connector 380V/240V, 3 phases, 8 kg, 19", removeable frontpanel without complex rack demounting

€499.00*

Immediately available or ready for collection
Nicolaudie DINA DR2 DIN rail mounted Controller
The DINA-DR2 is built on the latest generation of lighting controllers from Nicolaudie Architectural and combines all our recent innovations. Designed for DIN rail mouting, the DINA-DR2 is the perfect solution for mid-range lighting installations. Delivered with 1024 DMX channels, the controller can be ugraded to 1536 by adding a 3rd DMX universe.Programmable with ESA Pro 2 software or with Arcolis application, the DINA-DR2 features the new Nicolaudie Stand Alone engine (NSA) offering some great possibilities (multi-zone, extended triggers, 16-bit channels management...).Thanks to its Ethernet connection, the DINA-DR2 can be controlled from our Easy Remote Pro or LightPad applications as well as connected to the Internet and operated with the LS Cloud service.specificationsGeneralDimensions: 106 x 91 x 59 mmWeight: 180gUSB connectionEthernet connectionDMX channels: 1024 (upgradable to 1536)RDMMicro SD cardLS Cloud: optionalStand aloneNumber of scenes: 99Number of zones: 5Power voltage: 8-15V DCPower connector: Screw terminalwith din Rail power supplyTriggeringPorts: 8+3Clock/calendar triggersEthernet integrationRemote control apps: iOS/AndroidProgramming software/appESA2: PC/MacESA Pro 2: PC/MacArcolis: iOS/Android

€1,198.80*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails