Material: aluminum and ABS plastic alloy
Compact foldable
Infinitely adjustable in width and height, adjustable feet
Color: Black
Non-slip rubber feet
Silicone pad
A-frame construction
Patented open-close design of the arms
Dimensions open: 210.5 x 99.5 x 67.5 mm
Folded dimensions: 210.5 x 99.5 x 51.5 mm
Weight: 275 g
Capo for ukulele
Suitable for soprano, concert & tenor ukulelesMetal construction
High quality steel spring
Soft silicone pads
Protection for the neck
Can be positioned with one hand
Dimensions: 6 x 7 x 1.4 cm
Weight: approx. 22 g
Designed specifically for ukuleles, the NS Ukulele Capo Pro assures buzz-free, in-tune performance at any fret. A micrometer adjustment mechanism allows you to dial in the exact tension needed for clear ringing notes without excessive force in any position on the neck. This greatly reduces the need to retune your ukulele during and after capo use. The sleek aircraft grade aluminum construction can withstand the toughest playing/touring schedule while adding negligible additional weight or obstruction to the instrument.
3 HEAD STRING WINDER & CUTTER - a very practical tool to support you when changing strings. The Ortega Guitars String Winder & Cutter is a 3-in-1 tool for ukulele, guitar and bass maintenance: peg winder, bridge pin puller, and string clipper. The OSWC-3H comes with 3 interchangeable heads for ukulele, guitar, and bass. So you are prepared to restringalmost all stringed instruments — just one tool necessary, simple handling. Made of high-quality Japanese steel forhighest demands. Packed in a 4 colored box. STRING CUTTERHardened JAPANESE STEEL provides superior strength and long-lasting durability. Shears the wire cleanly and reliably. PIN PULLERQuick and easy string changes with built-in bridge pin puller. The wide contact surface of the bridge-pin puller to help better protect your acoustic’s bridge from marks. Universally suitable. STRING WINDERComes with 3 interchangeable heads for ukulele, guitar, and bass. Perfect fit for all your stringed instruments.
K & M 15550 Display Stand for Ukulele / Violin compact display stand for small stringed instruments such as violins or ukuleles Material: Plastic Color: red brownwith plastic instrument support Height: 205 mm Weight: approx. 150 g
Practical and high-quality ukulele wall holderWith two screws, the holder is mounted quickly and easilyThe headband is covered with abrasion-resistant and durable rubber. Suitable for all common models.Hanger: rigidMaterial: plastic, steelDimensions: 80 x 66 x 102 mm
K&M 17595 Ukulele / Violin Stand - blackpractical folding mechanisminstrument-friendly rubber support surfacesfor small stringed instruments such as ukuleles or violinsMaterial: PlasticSupport depth: 85 mmInstallation dimensions: 206 x 170 mmHeight: 220 mmSize folded: 206 x 19 x 220 mmWeight: 0.2 kg
Shapely little capo for ukuleles with curved fingerboardThe clamping mechanism can be operated quickly and easily with just one hand.Due to the rubber pad, the capo sits firmly on the fingerboard and does not slip. ,Material: zinc die castingVersion: matt chrome platedClamping hole: 11 to 22 mmClamping: spring tensionDimensions: 55 x 11 x 70 mm
Ukulele holder for microphones, guitar and music standsHolder easily clips onto stand. Fits all size ukuleles as well as mandolins or other small folk instruments. It features an extra strong clamb system and soft padded cradle support.Colour: black
Passive bridge pickup to slide onto the tie bridgeSuitable for many ukulele models from soprano to tenor, please note the pickup area on the bridgeThe pickup is located in the wooden bar around which the strings are wrappedNo gluing necessary, the pickup is fixed by the stringsIncl. detachable cable (3.5 to 6.3 mm jack plug, length 2.50 m)Dimensions: 74 x 12 x 10 mm (L x W x H)Pick-up field 50 mm
Soft and extra large leather picks - especially designed for ukulele players but also perfect to use with any nylon string guitar.Warm soft tones with no loss of volumeAssorted pack of 3 - black/white/red
Please note:Tuning pegs are conical, please do not measure the vertebrae at the upper square, but at the point where the tuning peg goes into the respective instrument (approximately in the middle).The matching tuning key and tuning hammer are also conical inside, in addition, the 4 interior walls in the middle are grooved, therefore the seemingly confusing dimensions. The indication e.g. 5.2 mm is measured, excluding the grooves inside, at the extreme end. Of course, the lowest opening of the voice key / vocal hammer is wider than the middle range.For chord zither, dulcimer, kanteleHandle made of white beech, T-shape
Steel pegs, nickel-plated, for zither
Tuning pegs are conical, please do not measure the pegs at the upper square, but where the tuning peg goes into the instrument in question (roughly in the middle).
The matching tuning keys and tuning hammers are also conical on the inside, and the 4 inner walls are grooved in the middle, hence the confusing dimensions. The specification e.g. 5.2 mm is measured at the outermost end, without taking into account the recesses on the inside. Of course, the bottom opening of the tuning key/tuning hammer is wider than the middle area.
Steel pegs, nickel-plated, for zither
Tuning pegs are conical, please do not measure the pegs at the upper square, but where the tuning peg goes into the instrument in question (roughly in the middle).
The matching tuning keys and tuning hammers are also conical on the inside, and the 4 inner walls are grooved in the middle, hence the confusing dimensions. The specification e.g. 5.2 mm is measured at the outermost end, without taking into account the recesses on the inside. Of course, the bottom opening of the tuning key/tuning hammer is wider than the middle area.
€1.14*
Immediately available or ready for collection
This website uses cookies to ensure the best experience possible. More information...
