Peripheral Equipments


Here you will find devices, controllers for adjusting and setting the audio signal and other accessories

TOPSELLER



Topseller

dbx Crossover 234XS Stereo 3-way
dbx 234 Xs Crossover XLR connectors40Hz high passphase reverse switch on all outputsx10 rangemode switches for mono 4-way or stereo 2-way/3-way operation internal powersupply 19" 1U

€259.00*

Immediately available or ready for collection
dbx CT3 Advance Cable Tester
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.Recommended for: Studio, Tour, Portable. FeaturesTests up to 8-pin cables2 piece chassis for testing installed cablesTest Tone GeneratorAllows connection between different format connectors with ease‘Banana’ connector continuity tester with beeper and LED indicatorSuper-rugged construction for durability and longer life(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections(2) BNC connectors for testing of 2 pin->to pin connections(2) RCA Phono connectors for testing of 2 pin->to pin connections(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections(2) Speaker Twist connectors for testing of 4 pin->to pin connections(2) Banana connectors for testing of 1 pin->to pin connections(2) 1/4" (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections(2) RJ45 connectors for testing of 8P8C modular connections(2) 1/8" (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections

€205.00*

Immediately available or ready for collection
Dbx ZC-BOB Passive 6-way break-out box for all ZC panels
Zones Controller- To the branching of RJ 45- Suitable for all DBX ZonePro models- Sends Volume- Source selection- Mute and fire alarmIf no serial cabling is possible, the break-out box can remedy the situation and switch to a star-shaped cabling at any point, the connection is also via CAT5 cable with RJ-45 plug.

€107.00*

delivery time 14 days
Ground Loop Isolator
High Quality Ground Loop Isolator2x RCA plug male / 2 x RCA plug female, perfect for eliminating hum - and overtone signals, deletes disturbing noises of computers, laptops and DVD players, earthing loop isolator Size: cylinder 60x35mmTotal lenght of cable : 60cm

€9.32*

Immediately available or ready for collection
LH-051 Dual phantom power adapter
LH-051 Omnitronic Dual phantom power adapter Phantom power for 2 microphonesPhantom power supply for condenser or electret microphones Selectable +12/ +48 V power supplyIdeal accessory for mixers without phantom powerInputs and outputs via balanced XLR connectorsOperation via 2 x 9 V block battery or power unit (not included)Power supply: 12 V DC or 2 x 9 V blockOutput voltage: +12 V/ +48 V DC, ±2 V DCInput impedance: 600 ohmsOutput impedance: 600 ohmsDimensions: 143 x 93 x 45 mmWeight: 485 g

€76.20*

delivery time 14 days
ART dual X direct active di box
ART Dualxdirect Active Dual DI Box - fully active design, 18-48V phantom powered or 9V battery powered, converts high-impedance balanced/unbalanced inputs into 600 Ohms balanced outputs, switchable input attenuation (0, -30dB), switchable ground lift, 1/4" TRS/XLR combo connector inputs, balanced XLR outputs, rugged extruded aluminium case. Frequency response: 10Hz-100kHz ± 0.5dB @ +0dBu. THD: 100dB (typical). Channel separation: > 80dB (typical). Maximum input level: +4, +34dBu. Maximum output level: +6dBu (battery powered), +14dBu (phantom powered). Input connections: 1/4" TRS/XLR female balanced/unbalanced (x2), 470k Ohms. Thru connections: 1/4" TRS (2). Output connections: XLR male balanced (x2), < 600 Ohms. Input Attenuation: Switchable, (0, -30 dB), Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel), Dimensions: 99 x 117 x 47mm. Weight: 0.38kg

€77.00*

delivery time 14 days
RTA-M dbx linear measurement microphone for DriveRacks
DBX DRIVERACK RTA-Mmeasurement microphone for dbx Driverack, Polar Pattern : omni-directional, back electret-Condenser, Frequency range: 20 - 20.000 HzImpedance : 250 30% (at 1,000Hz)Sensitivity : -63 dB +-3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )9-52 V Phantompower necessaryincl. clamp and case

€137.80*

delivery time 14 days
Dbx ZC1 programmable volume controller, wall panel
Volume control to regulate the zone volumefor DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box

€83.00*

Immediately available or ready for collection
ART EQ351 Equalizer
1-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 1 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg

€189.00*

delivery time 14 days
ART Phantom 2 Pro
ART Phantom II Pro, 2-Channel Phantom Power Supply with Battery Support, for up two Condenser Microphones, XLR connectors for balanced inputs and outputs, Low power, high efficiency CMOS circuitry for Long battery life using a standard 9 Volt battery (Alkaline recommended), Can be powered with an external power supply (not included) from AC mains, Rugged extruded aluminum case with accessible battery compartment, LED lighted On/Off switch, Low noise, low distortion circuitry

€103.99*

Immediately available or ready for collection
Rane DR6IM Touchscreen Remote
The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired. Ability to use custom background images and logos in full-color on the 7-inch LCD display.Screw the included wall-mount bracket over U.S. (or international) electrical boxes, or flush-mount the DR6 with the bracket, and cut a 2 (5 cm) square hole in the wall to accommodate the cable.Optional, on-screen User Access logins secure management pages from public or staff use, and a programmable ambient light sensor automatically dims the backlight. The Control Page Designer in Halogen allows the user to create one set of pages and use them in a web control design, DR6 display or both.FeaturesFully customizable touchscreen controllerElectrical box or wall flush-mount optionsSupports multiple pages or tabs and any set of levels, toggles, selectors and/or commandsDrag, drop and resize controls as desiredRANE RPI (Remote Power Injector - not included) required for use withHAL3s and legacy HAL multiprocessorsIn the BoxDR6Wall-Mount BracketUser GuideSafety & Warranty Manual

€269.00*

Immediately available or ready for collection
ART PDB4 Four-Channel Passive Direct Box
ART PDB4 Four-Channel Passive Direct Box DetailsThe ART PDB4 Four-Channel Passive Direct Box is a deceptively simple, yet surprisingly useful addition to any serious collection of audio equipment. The PDB4 is a four channel passive direct box that features four quality, fully transformer isolated, direct boxes in a 1U 19-inch rack mount chassis. Inputs and outputs of each of the four channels are isolated to maximize channel separation. Transformer isolation on each output helps to eliminate system ground loops.It is a rock solid, roadworthy interface for connecting outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced audio products. The PDB4 also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.Electric guitar and bass pick-up output signals, keyboards and line level signals, DJ console output signals, speaker level signals. However you decide to use it, we're sure you'll find the ART PDB4 Four Channel Passive Direct Box to be an indispensable addition to your audio equipment arsenal.ART PDB4 Four-Channel Passive Direct Box FeaturesFour Fully Isolated ChannelsSwitchable Input Attenuation (0dB, -20dB, -40dB)50k Ohm Instrument/Line Input50k Ohm 1/4-inch Parallel Link Jack600 Ohm XLR Output JackSwitchable Ground Lift1U 19-inch Chassis

€139.00*

Immediately available or ready for collection
ART active Xdirect Di box
Active DI BoxFrequency range: 10 Hz –100kHzMax. output level: +6 dBu (battery powered) / +14 dBu (phantom powered)Max. input level: +4/+24/+44 dBuDynamic range: > 100 dBInput: Jack and XLR femaleInput impedance 470 OhmOutput: XLR maleOutput impedance

€59.00*

delivery time 14 days
dbx 131S graphic equaliser 1x 31-band
dbx 131s Graphic Equalizer - 1x 31-band+/- 6/12dB gainoutput meterswitchable bypassclip LED, 50Hz low cut filter (12dB/octave)20mm faders>108dB dynamic range6/12dB switchbalanced jack/XLR in/outinternal power supplyDimensions: 19"/1U

€205.00*

Immediately available or ready for collection
Bluetooth Total MKII Radio transmission system for active speakers Bluetooth
Bluetooth Total is an XLR-equipped, rechargeable Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Total, you can quickly and easily add Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR input of a mixer or powered speaker, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Totals together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Total running for over 6 hours. The Bluetooth Total is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerWirelessly link two together for cable-free stereo playback*XLR-equipped connection100+ft rangeUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Total 2, or the Alto Professional Bluetooth Ultimate, both sold separately. Original Bluetooth Total is not supported

€49.00*

delivery time 14 days
ART DPDB dual passive direct BOX
736/5000Passive DI boxThe dPDB Passive DI Box has two high-quality DI boxes in a portable housing. It is used for balancing unsymmetrical signals e.g. from line instruments such as bass, guitar or keyboards. It converts the high-impedance signals of the instruments into low-impedance balanced signals, which are necessary for mixing consoles. The dPDB has a switchable input attenuation (0dB, -20dB, -40dB), a 50k Ohm instrument input, a 50k Ohm parallel link socket, a 600 Ohm XLR output and a switchable ground lift.Characteristics:• Frequency response: 10 Hz - 50 kHz +/- 0.5dB @ + 4dBu• Connectors: 600 Ohm XLR Output Jack• Ground Lift Switchable• Input Sensitivity: Switchable (0dB, -20dB, -40dB)

€68.00*

delivery time 14 days
Bluetooth Ultimate Radio transmission system for active speakers Bluetooth
Bluetooth Ultimate is a stereo Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Ultimate, you can quickly and easily add stereo Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR inputs of a mixer or powered speaker setup, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Ultimates together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Ultimate running for over 6 hours. Bluetooth Ultimate is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerLink two together for cable-free stereo playback*Dual XLR outputs for wired stereo playback*100+ft rangeXLR on front and backUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Ultimate, or the Alto Professional Bluetooth Total 2, both sold separately. Original Bluetooth Total is not supported. Additional XLR cable not included.

€79.00*

Immediately available or ready for collection
Dbx ZC6-EU Wall mounted Zone Controller
Wall-Mounted Zone ControllerPush Button Up/Down ControllerUP / DOWN function for volume etc. of the ZonePro series.Connection ivia CAT5 cable with RJ-45 plug.

€83.00*

delivery time 14 days
ART EQ341 Equalizer
2-channel 15-band graphic equalizerPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm slider with center catchGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls Power switch, L / R control range switch, L / R bypass switch, L / R level control, Ground Lift switchFilter type constant Q-factor, center frequency accuracy 3%Frequency bands 2 x 15, 2/3 octave, according to ISO standardMaximum amplification / reduction adjustable, ± 6 dB or ± 12 dBTravel of the slider 20 mm with center catchIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range 20 Hz? 20 kHz, ± 0.5 dBExternal voltage difference 94 dBDistortion (THD) 0.01%Channel distance> 50 dBInputs / outputs XLR and 6.3 mm jack (active, symmetrical), cinch (unbalanced)Maximum input level +22 dBmInput impedance 20 kOhm (symmetrical), 15 kOhm (unbalanced)Maximum output level +18 dBm (balanced), +22 dBm (unbalanced)Output impedance

€159.00*

delivery time 14 days
LH-053 DI-Box passive
Passive DI box1 high-impedance signal input, 6.3 mm jack1 low-impedance XLR output1 instrument feed-through output, 6.3 mm jackConverts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dBGround-lift switch eliminates signal interference and ground loop problemsRugged black metal housingFrequency range: 15 Hz - 30 kHz Input impedance: 50 kohms Output impedance: 600 ohms S/N ratio: >95 dB Input connector: 6.3 mm jack, unbal. Output connectors: XLR, bal. 6.3 mm jack, unbal. (parallel out) Dimensions: 127 x 74 x 45 mm Weight: 430 g

€21.00*

delivery time 14 days

TOP MARKEN


Thumbnails
Thumbnails