Peripheral Equipments
Here you will find devices, controllers for adjusting and setting the audio signal and other accessories
TOPSELLER
Topseller
New
OMNITRONIC LH-061 PRO Passive Dual DI Box
€49.00*
Passive 2-channel DI box/splitter, blackPassive 2-channel DI box with split mode2 high-impedance signal inputs via two 6.3 mm jacks2 low-impedance XLR outputs2 feed-through outputs (6.3 mm jack)Converts 2 separate unbalanced line inputs (e.g. CD player, instruments) into 2 balanced XLR outputs, for connecting a mixerSwitchable input attenuation: 0 dB, -20 dB, -40 dBgroundlift selectorCables can be routed under the housingPackage contents1 x user manual, 1 x deviceTECHNICAL SPECIFICATIONSFrequency range: 15 - 30000 HzImpedance: Input: 50 kOhmOutput: 600 OhmInput attenuation: 0 dB, -20 dB, -40 dB; switchableConnections: Input: 2 x 6.3 mm jack socket (mono) mounting versionOutput: line via 2 x 3-pin XLRLink: 2 x 6.3 mm jack socket (mono) mounting versionMax. level: Output: +6 dBuDimensions: Width: 13,3 cmDepth: 11,5 cmHeight: 5,4 cmWeight: 610 g
Immediately available or ready for collection
Bluetooth Ultimate Radio transmission system for active speakers Bluetooth
€79.00*
Bluetooth Ultimate is a stereo Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Ultimate, you can quickly and easily add stereo Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR inputs of a mixer or powered speaker setup, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Ultimates together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Ultimate running for over 6 hours. Bluetooth Ultimate is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerLink two together for cable-free stereo playback*Dual XLR outputs for wired stereo playback*100+ft rangeXLR on front and backUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Ultimate, or the Alto Professional Bluetooth Total 2, both sold separately. Original Bluetooth Total is not supported. Additional XLR cable not included.
delivery time 14 days
RCF RDNet Control 8 8 output Master Unit
€1,699.00*
The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations. The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc. Data transfer can be routed also through the provided xlr connectors enabling the control of the system on traditional multi-cored cables.FEATURESETHERNET (REMOTE CONTROL) AND USB (DIRECT CONTROL) PC CONNECTION TO RDNETCONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICESALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECONDAUTO DETECT DEVICE PLACEMENTControlling slave devices status and functionsMonitoring and displaying faults and warnings sent from slave devicesStoring subnet user filters configuration in a removable memory cardGENERAL SPECIFICATIONSNumber of subnets: 8Connectors: RJ 45, XLRMax number of devices (for each subnet): 32Configuration: PC softwarePC connection: USB (type B), EthernetData storage: SD card (max. 4 GB)Operating voltage: 90-240 V~ 50/60HzPower consumption (W): 15RDNet: YesSTANDARD COMPLIANCECE compliance: YesPHYSICAL SPECIFICATIONSCabinet/Case Material: MetalColor: BlackRack mounting: 19", 1USIZEHeight: 44 mm / 1.73 inchesWidth: 482 mm / 18.98 inchesDepth: 182 mm / 7.17 inchesWeight: 2.71 kg / 5.97 lbs
Immediately available or ready for collection
Alto Stealth Wireless Expander MK2 Kit
€149.00*
ADDITIONAL STEALTH WIRELESS MKII RECEIVERExpands your existing Stealth Wireless MKII systemSingle channel receiver with a 1/4" TRS output (per unit)Reliable UHF band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g
Immediately available or ready for collection
Alto Stealth Wireless MK2 Audio
€475.00*
2-CHANNEL UHF RADIO SYSTEM FOR ACTIVE SPEAKERSAdds a wireless audio connection to any active speakerDual channel transmitter (x1) with two XLR+6.35mm TRS inputsSingle channel receiver (x2) with a 1/4" TRS output (per unit)Replaces up to 200 feet of console-to-system cablingReliable UHF frequency band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceExpand your system with the Stealth Wireless Expander Pack (sold separately)Technical specifications:Channel:Frequency Response: 50Hz - 17kHz, ±3dBFrequency range: 863-865 MHz (EU / UK) (depending on region)Channels: Up to 100+ selectable UHF frequency bands (depending on region)Wireless range: 61 metersBandwidth: 863-865MHz: 2MHzOscillation type: PLLFrequency Stability: ±0.005%Frequency Deviation: ±20kHzInputs: 2 XLR and 1/4" TRS combo inputsPower supply: 12V, 500mADimensions: (Width x Depth x Height) 180mm x 99mm x 35mmWeight: 302gRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g
Immediately available or ready for collection
ART DTI Dual Transformer/Isolator
€69.90*
ART DTI Dual Transformer/Isolator - a high quality, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, Input Connections: XLR female balanced, 1/4" TRS, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, 1/4" TRS, unbalanced, and RCA type phono jacks, Dimensions 44.5mm x 107mm x 89mm, Weight 0,34 kg
delivery time 14 days
dbx Crossover 223XS Stereo 2-way
€225.00*
dbx 223Xs - active Crossover - 2-way stereo or 3-way mono crossover24dB Linkwitz-Rileymono sub out, input/LF/HF gain controlsfactor selection (10x)phase reverse functionswitchable 40Hz HP filterbalanced XLR in/outinternal PSUDimensions: 19"/1U
Immediately available or ready for collection
Rane DR6IM Touchscreen Remote
€269.00*
The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired. Ability to use custom background images and logos in full-color on the 7-inch LCD display.Screw the included wall-mount bracket over U.S. (or international) electrical boxes, or flush-mount the DR6 with the bracket, and cut a 2 (5 cm) square hole in the wall to accommodate the cable.Optional, on-screen User Access logins secure management pages from public or staff use, and a programmable ambient light sensor automatically dims the backlight. The Control Page Designer in Halogen allows the user to create one set of pages and use them in a web control design, DR6 display or both.FeaturesFully customizable touchscreen controllerElectrical box or wall flush-mount optionsSupports multiple pages or tabs and any set of levels, toggles, selectors and/or commandsDrag, drop and resize controls as desiredRANE RPI (Remote Power Injector - not included) required for use withHAL3s and legacy HAL multiprocessorsIn the BoxDR6Wall-Mount BracketUser GuideSafety & Warranty Manual
Immediately available or ready for collection
dbx DriveRack PA2
€749.00*
DBX DRIVERACK PA2digital speaker management system31 Band grafic equalizerparametric 8-Band input-EQ with auto EQ function, peak stop limitercrossovercompressorsubharmonic synthesizeroutput-delay up to 3,4 m/10 ms,input-delay up to 34 m/100 msfeedback-destroyer with 12x notch-filters 1/80 octaveparametric 8-band output-EQ also for speaker tuningsthird-band real time analyzerpink noise generatorremote control with Mac/Windows/Android/iOS2x XLR input,1x XLRwith 48V phantom power for optional measurement microphone6x XLR male outputsethernet connectorUSB connector19" 1U
Delivery time from 6 to 8 weeks!
ART Phantom 2 Pro
€104.00*
ART Phantom II Pro, 2-Channel Phantom Power Supply with Battery Support, for up two Condenser Microphones, XLR connectors for balanced inputs and outputs, Low power, high efficiency CMOS circuitry for Long battery life using a standard 9 Volt battery (Alkaline recommended), Can be powered with an external power supply (not included) from AC mains, Rugged extruded aluminum case with accessible battery compartment, LED lighted On/Off switch, Low noise, low distortion circuitry
Immediately available or ready for collection
ART EQ341 Equalizer
€159.00*
2-channel 15-band graphic equalizerPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm slider with center catchGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls Power switch, L / R control range switch, L / R bypass switch, L / R level control, Ground Lift switchFilter type constant Q-factor, center frequency accuracy 3%Frequency bands 2 x 15, 2/3 octave, according to ISO standardMaximum amplification / reduction adjustable, ± 6 dB or ± 12 dBTravel of the slider 20 mm with center catchIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range 20 Hz? 20 kHz, ± 0.5 dBExternal voltage difference 94 dBDistortion (THD) 0.01%Channel distance> 50 dBInputs / outputs XLR and 6.3 mm jack (active, symmetrical), cinch (unbalanced)Maximum input level +22 dBmInput impedance 20 kOhm (symmetrical), 15 kOhm (unbalanced)Maximum output level +18 dBm (balanced), +22 dBm (unbalanced)Output impedance
delivery time 14 days
dbx 286S mic preamp/processor with dynamics
€225.00*
The dbx 286S is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. The dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4" TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to "loop out" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination.
delivery time 14 days
Dbx ZC2 Remote
€83.00*
DBX DriveRack 260, 220i and ZoneProVolume control and mute switchConnection via Cat 5 cable
delivery time 14 days
dbx 1231 graphic equalizer 2x 31-band
€539.00*
DBX 12312x 31-Band Graphic EQ4 LED display indicators45mm Faders (20Hz - 20kHz)Range +/- 6dB und +/- 15dBbalanced 1/4" jack and XLR inputs/outputs.Size: 19"/3U
delivery time 14 days
Bluetooth Total MKII Radio transmission system for active speakers Bluetooth
€49.00*
Bluetooth Total is an XLR-equipped, rechargeable Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Total, you can quickly and easily add Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR input of a mixer or powered speaker, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Totals together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Total running for over 6 hours. The Bluetooth Total is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerWirelessly link two together for cable-free stereo playback*XLR-equipped connection100+ft rangeUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Total 2, or the Alto Professional Bluetooth Ultimate, both sold separately. Original Bluetooth Total is not supported
delivery time 14 days
ART PDB4 Four-Channel Passive Direct Box
€139.00*
ART PDB4 Four-Channel Passive Direct Box DetailsThe ART PDB4 Four-Channel Passive Direct Box is a deceptively simple, yet surprisingly useful addition to any serious collection of audio equipment. The PDB4 is a four channel passive direct box that features four quality, fully transformer isolated, direct boxes in a 1U 19-inch rack mount chassis. Inputs and outputs of each of the four channels are isolated to maximize channel separation. Transformer isolation on each output helps to eliminate system ground loops.It is a rock solid, roadworthy interface for connecting outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced audio products. The PDB4 also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.Electric guitar and bass pick-up output signals, keyboards and line level signals, DJ console output signals, speaker level signals. However you decide to use it, we're sure you'll find the ART PDB4 Four Channel Passive Direct Box to be an indispensable addition to your audio equipment arsenal.ART PDB4 Four-Channel Passive Direct Box FeaturesFour Fully Isolated ChannelsSwitchable Input Attenuation (0dB, -20dB, -40dB)50k Ohm Instrument/Line Input50k Ohm 1/4-inch Parallel Link Jack600 Ohm XLR Output JackSwitchable Ground Lift1U 19-inch Chassis
delivery time 14 days
Linea Research ASC48 FIR Audio Controller with Dante Card
€2,490.00*
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 and Dante™ / AES67 (option) inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 and Dante™ inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.
delivery time 7 days
ART EQ355 Equalizer
€285.00*
2-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 2 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg
delivery time 14 days
dbx 215 graphic equaliser 2x 15-band
€205.00*
The dbx® 2-Series Graphic Equalizers have been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls. The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, +/- 12dB input gain range, and switchable 50Hz/12dB octave low-cut filters, but also includes other thoughtful features. These features include: 20 mm faders; selectable +/-6dB or +/-12dB boost/cut range for precise gain adjustments; XLR, and 1/4" TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx® 2-Series has been pursued to make your job easier. Two 15-band, 2/3-octave Constant Q frequency bands Switchable boost/cut ranges of ±6 or ±12 dB 12dB per octave, 3dB down @ 50Hz low-cut filter Front panel bypass switch ±12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Internal Toroidal Transformer Frequency Repsonse of 50kHx Dynamic range of greater than 108dB
delivery time 14 days
Dbx ZC3 4-way source selector switch, wall panel
€89.00*
A selector switch allows the ZC-3 to switch between the presets of the DR260.With the ZonePro series, the source selection or scene selection can be programmed, the connection is made via a CAT5 cable with RJ-45 connector.for DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box
delivery time 14 days