Peripheral Equipments


Here you will find devices, controllers for adjusting and setting the audio signal and other accessories

TOPSELLER



Topseller

Omnitronic LH-045 microphone preamplifier
OMNITRONIC LH-045 Microphone 1-channel preamplifier 1 microphone, XLR (bal.) or 6.3 mm jack (unbal.) Gain control, 10 steps (6-50 dB) Phantom power can be switched on Clip LED 1 line output, XLR (bal.) or 6.3 mm (unbal.) Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedance: 10 kohms bal./unbal. Max. input level: +4 dB bal./+10 dB unbal. Gain: 50 dB XLR/44 dB jack T.H.D.: 0.01 % Frequency range: 25 Hz - 16 kHz S/N ratio: >75 dB Dimensions: 143 x 93 x 45 mm Weight: 350 g

76,20 €*

delivery time 14 days
dbx DriveRack Venu360
Remote control via own network with Mac, iOS, Android or Windows devices3 Inputs: Analogue or AES6 OutputsRTA microphone connector on the frontAuto EQ function with external RTA measuring microphoneAFS Feedback EliminatorInput module with 31-band graphical EQ, 12-band parametric EQ, subharmonic synthesis, delay and noise gateOutput module with crossover for up to 6-way mono, 12-band auto-EQs, dbx compressors, automatic gain control, subharmonic synthesiser, noise gate, delay (up to 1000 ms per output) and alignment delayXLR input and outputEthernet portUSB portLED chain for each input and outputBody shape: 19"/ 1URTA microphone optional (not included)Tested routers: Dlink 636L, Dlink Cloud router 2000, Cisco / Linksys: WRT54G2V1, Netgear WGR614 v7, Netgear WNR 1000

1.199,00 €*

Immediately available or ready for collection
QPRO Audio QLM 4.8 Digital loudspeaker controller 4in/8out
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 4 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 8 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 96kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:

1.299,00 €*

Immediately available or ready for collection
LH-053 DI-Box passive
Passive DI box1 high-impedance signal input, 6.3 mm jack1 low-impedance XLR output1 instrument feed-through output, 6.3 mm jackConverts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dBGround-lift switch eliminates signal interference and ground loop problemsRugged black metal housingFrequency range: 15 Hz - 30 kHz Input impedance: 50 kohms Output impedance: 600 ohms S/N ratio: >95 dB Input connector: 6.3 mm jack, unbal. Output connectors: XLR, bal. 6.3 mm jack, unbal. (parallel out) Dimensions: 127 x 74 x 45 mm Weight: 430 g

21,00 €*

delivery time 14 days
DBX 266 XS Stereo-Kompressor/Gate
DBX 266 XS stereo compressor/gate with integrated PSUOver Easy function (automatic attack and release), Compressor-Ratio "1:1 - 4:1",XLR in/out, -10/+4dB switchablestereo link19", 1U

159,00 €*

delivery time 14 days
ART dual X direct active di box
ART Dualxdirect Active Dual DI Box - fully active design, 18-48V phantom powered or 9V battery powered, converts high-impedance balanced/unbalanced inputs into 600 Ohms balanced outputs, switchable input attenuation (0, -30dB), switchable ground lift, 1/4" TRS/XLR combo connector inputs, balanced XLR outputs, rugged extruded aluminium case. Frequency response: 10Hz-100kHz ± 0.5dB @ +0dBu. THD: 100dB (typical). Channel separation: > 80dB (typical). Maximum input level: +4, +34dBu. Maximum output level: +6dBu (battery powered), +14dBu (phantom powered). Input connections: 1/4" TRS/XLR female balanced/unbalanced (x2), 470k Ohms. Thru connections: 1/4" TRS (2). Output connections: XLR male balanced (x2), < 600 Ohms. Input Attenuation: Switchable, (0, -30 dB), Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel), Dimensions: 99 x 117 x 47mm. Weight: 0.38kg

77,00 €*

delivery time 14 days
ART EQ351 Equalizer
1-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 1 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg

189,00 €*

delivery time 14 days
ART dual PWM limiter
2-Channel dynamic processorStereo link function of the channelsAdjustable attack and releaseBypass switch per channelGain reduction LED2x Line inputs: XLR and jack, balanced 6.3 mm2x Line outputs: XLR and jack, balanced 6.3 mm2 Loop inputs: 6.3 mm jackDesign: 19" / 1UDimensions (W x H x D): 482.6 x 44.5 x 150 mmWeight: 2.1 kg

248,00 €*

delivery time 14 days
Denon Pro DN-200BR Stereo Bluetooth® Audio Receiver
Balanced XLR and 6.3 mm jack outputsUp to 33 m rangeBluetooth receiverSolid high-quality product for installations

129,00 €*

Immediately available or ready for collection
Dbx ZC6-EU Wall mounted Zone Controller
Wall-Mounted Zone ControllerPush Button Up/Down ControllerUP / DOWN function for volume etc. of the ZonePro series.Connection ivia CAT5 cable with RJ-45 plug.

83,00 €*

delivery time 14 days
dbx DriveRack 4820
48 and 96 kHz operationColor QVGA Display4 analog and AES/EBU inputs8 analog and AES/EBU outputsOptional CobraNet I/OOptional Jensen® I/O TransformersFull Bandpass Filter, Crossover andRouting Configurations with Bessel,Butterworth, and Linkwitz-Riley filters31-Band Graphic and 9-bandParametric EQ on every input6-band Parametric EQ on every outputLoudspeaker Cluster and DriverAlignment DelaysSelectable DSP inserts on all inputsand outputs including Classic dbxCompression, Limiting and AdvancedFeedback Suppression among othersEthernet networking controldbx ZC wall panel control

3.759,00 €*

delivery time 14 days
dbx CT3 Advance Cable Tester
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.Recommended for: Studio, Tour, Portable. FeaturesTests up to 8-pin cables2 piece chassis for testing installed cablesTest Tone GeneratorAllows connection between different format connectors with ease‘Banana’ connector continuity tester with beeper and LED indicatorSuper-rugged construction for durability and longer life(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections(2) BNC connectors for testing of 2 pin->to pin connections(2) RCA Phono connectors for testing of 2 pin->to pin connections(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections(2) Speaker Twist connectors for testing of 4 pin->to pin connections(2) Banana connectors for testing of 1 pin->to pin connections(2) 1/4" (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections(2) RJ45 connectors for testing of 8P8C modular connections(2) 1/8" (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections

205,00 €*

Immediately available or ready for collection
Alto Stealth Wireless Expander MK2 Kit
ADDITIONAL STEALTH WIRELESS MKII RECEIVERExpands your existing Stealth Wireless MKII systemSingle channel receiver with a 1/4" TRS output (per unit)Reliable UHF band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g

139,00 €*

Immediately available or ready for collection
ART Z-Direct passive DI BOX
Passive DI BoxFrequency range: 10 Hz -50 kHzTHD: 0.01% Typical @ 1 kHzInput: unbalanced jackInput impedance 50 OhmOutput: XLR maleOutput impedance 600 OhmSwitchable low pass filter -3 dB @ 30 kHzPAD switch (0dB, -20dB, -40dB)Phase switch (normal / invert)Switchable ground liftDimensions: 44.5 x 107 x 89 mmWeight: approx. 340 g

42,00 €*

Immediately available or ready for collection
RCF RDNet Control 8 8 output Master Unit
The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations. The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc. Data transfer can be routed also through the provided xlr connectors enabling the control of the system on traditional multi-cored cables.FEATURESETHERNET (REMOTE CONTROL) AND USB (DIRECT CONTROL) PC CONNECTION TO RDNETCONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICESALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECONDAUTO DETECT DEVICE PLACEMENTControlling slave devices status and functionsMonitoring and displaying faults and warnings sent from slave devicesStoring subnet user filters configuration in a removable memory cardGENERAL SPECIFICATIONSNumber of subnets: 8Connectors: RJ 45, XLRMax number of devices (for each subnet): 32Configuration: PC softwarePC connection: USB (type B), EthernetData storage: SD card (max. 4 GB)Operating voltage: 90-240 V~ 50/60HzPower consumption (W): 15RDNet: YesSTANDARD COMPLIANCECE compliance: YesPHYSICAL SPECIFICATIONSCabinet/Case Material: MetalColor: BlackRack mounting: 19", 1USIZEHeight: 44 mm / 1.73 inchesWidth: 482 mm / 18.98 inchesDepth: 182 mm / 7.17 inchesWeight: 2.71 kg / 5.97 lbs

1.699,00 €*

Immediately available or ready for collection
dbx 131S graphic equaliser 1x 31-band
dbx 131s Graphic Equalizer - 1x 31-band+/- 6/12dB gainoutput meterswitchable bypassclip LED, 50Hz low cut filter (12dB/octave)20mm faders>108dB dynamic range6/12dB switchbalanced jack/XLR in/outinternal power supplyDimensions: 19"/1U

205,00 €*

Immediately available or ready for collection
QPRO Audio QLM 2.4N Digital loudspeaker controller 2in/4out
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 2 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 4 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 192kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:

799,00 €*

Immediately available or ready for collection
LH-051 Dual phantom power adapter
LH-051 Omnitronic Dual phantom power adapter Phantom power for 2 microphonesPhantom power supply for condenser or electret microphones Selectable +12/ +48 V power supplyIdeal accessory for mixers without phantom powerInputs and outputs via balanced XLR connectorsOperation via 2 x 9 V block battery or power unit (not included)Power supply: 12 V DC or 2 x 9 V blockOutput voltage: +12 V/ +48 V DC, ±2 V DCInput impedance: 600 ohmsOutput impedance: 600 ohmsDimensions: 143 x 93 x 45 mmWeight: 485 g

76,20 €*

delivery time 14 days
DBX-ZC-8 4-way switch with volume-up-down, wall panel
4-way source switch- Volume- DBX ZonePro 1260/1261- Suitable for standard wall mountingA panel can be used to control source selection and volume simultaneously. A CAT5 cable with RJ-45 connector is the only necessary connection.

89,00 €*

delivery time 14 days
Dbx ZC1 programmable volume controller, wall panel
Volume control to regulate the zone volumefor DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box

83,00 €*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails