Due to its 4-point tube connection, this truss is very stable and suitable for extreme loads in trade fair construction and event technology. They are available with 50mm (DT44, DT34) or 35mm (DT24) main tube diameter.
DuraTruss DT Topper / Floor stand / Wall bracketThe DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm- Wall thickness main tube: 2mm- Metall: steel- Connection: conical connectors with bolt and splint- Delivery includes:- Dimensions (W x H x D): 290 x 195 x 290 mm- Weight: 2,3 kg Please do not forget to order the half connector (1749000011 cone, 1749000006 steel pin, 1744000010 safety clip)
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended by the lengths 25cm, 1, 2 and 3 meters as standard. The system also includes corners, t-branches and angles. Further lengths, corners and circles can be offered on request. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Specifications:- Main tube diameter: 50mm- Wall thickness main tube: 2mm- Bracing diameter: 20mm- Wall thickness bracing: 2mm- Alloy: EN-AW 6082 T6 (AlMgSi1)- Connection: conical connectors with bolt and splint- Delivery includes: 4 conical connectors, 8 bolts, 8 splints- Produced according DIN 4112, DIN 4113-1- Dimensions:290 x 290 x 1000 mm (without cone)- Weight: 6,1 kg
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1500 x 500 x 500 mm - 90 °100% compatible with GlobalTruss
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1500 x 500 x 500 mm 100% compatible with GlobalTruss
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29 cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1 The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.100% compatible with GlobalTruss
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended by the lengths 25cm, 1, 2 and 3 meters as standard. The system also includes corners, t-branches and angles. Further lengths, corners and circles can be offered on request. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Specifications:- Main tube diameter: 50mm- Wall thickness main tube: 2mm- Bracing diameter: 20mm- Wall thickness bracing: 2mm- Alloy: EN-AW 6082 T6 (AlMgSi1)- Connection: conical connectors with bolt and splint- Delivery includes: 4 conical connectors, 8 bolts, 8 splints- Produced according DIN 4112, DIN 4113-1- Dimensions:290 x 290 x 750 mm (without cone)- Weight: 4,9 kg
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
DuraTruss DT 34/3-150 - 150cm straight The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling.The four tubes are made of 50mm aluminum tube with a wall thickness of 3mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips. Optionally the system can be extended with various lengths, corners, T-branches, angles, and circles. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range. The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Technical specs:- Diametrics main pipe: 50mm - Wall thickness: 3 mm - Material: Aluminium EN-AW 6082 T6 (AlMgSi1)- Dimensions braces: 20 x 2 mm - Included in delivery: 4 cones, 8 steel pins, 8 safety clips- Length: 1500mm (without cone)- Width: 290 mm - Height: 290 mm- Weight: 10,5 kg
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
The DURATRUSS DT44/3 System is a 4-point truss system that is connected with four conical connectors, bolts and locking pins. The advantage of the quick connector system is that it closes with a force-fit connection with the belt tube and enables quick assembly with frequent assembly and disassembly. The four belt tubes are made of 50mm aluminum tube with 3mm wall thickness and give this system an excellent weight-load capacity ratio. The braces have a diameter of 25mm and a wall thickness of 3mm. The system can optionally be expanded as required. Corners, T-branches, angles, and circles are available. An extensive range of accessories from hooks, connectors, floor plates, wall brackets, spacers and much more round off the delivery program. The system, made in Europe, is of course TÜV certified.Strengths of the truss system: • High quality aluminum tubes with 50mm diameter • Easy installation • Low weight • Space-saving transport • For exhibition stand construction and event technologySpecifications:• Main Tube: 50 x 3 mm • Braces: 25 x 3mm• Alloy: EN-AW 6082 T6 (AlMgSi1)• Manufactured according DIN 4112, DIN 4113-1• Coupling System: Concial connector with bolt and locking pin Dimension and weight:• Lenght: 1500 mm (without connector)• Width: 400 mm • Height: 400 mm• Weight: 13,4 kgDelivery including connector set, consisting of: 4 conical connectors, 8 bolts and 8 locking pins.
The DT 14 System by DURATRUSS is a decorative 4 point truss system using conical connectors, steel pins and clips. It’s suitable for shop building, displays or for decoration objects at home. The DT 14 System uses a boxcorner (UJB) to connect in 90° angles in all directions. As accessories available are base plates and special truss couplers.Technical Data: - Diameter main tube: 20mm - Thickness: 2mm - Conical connections included (4 connectors, 4 steel pins, 4 safety clips) - Dimensions: 10x10mmAdvantages:- Very decorative truss system - Quick set up with boxcorner (UJB) - Easy set-up - Very light weight - Uses less space in transport and storage - For Shops, Display and home use100% compatible with GlobalTruss
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling.The four tubes are made of 50mm aluminum tube with a wall thickness of 3mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.Optionally the system can be extended with various lengths, corners, T-branches, angles, and circles. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Technical specs:- Diametrics main pipe: 50mm - Wall thickness: 3 mm - Material: Aluminium EN-AW 6082 T6 (AlMgSi1)- Dimensions braces: 20 x 2 mm - Included in delivery: 8 cones, 16 steel pins, 16 safety clips- Length: 500mm (without cone)- Width: 500 mm - Height: 500 mm- Weight: 12,4 kg
DuraTruss DT44/2-400 - 4-Point Truss 400cmThe DT44/2 System is a 4-point truss system that is connected with conical connectors, bolts and locking pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 25 mm with a wall thickness of 3mm. Each truss piece includes all necessary conical connectors, steel pins and safety clips. The system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, spacers and much more complete the product line. The system is from European production which is compatible to the most common systems in the market and is TÜV approved. Strengths of the truss system: • High quality aluminum tubes with 50mm diameter • Easy installation • Low weight • Space-saving transport • For exhibition booth construction and event technologySpecifications:• Main Tube: 50 x 2 mm • Braces: 25 x 3mm• Alloy: EN-AW 6082 T6 (AlMgSi1)• Manufactured according DIN 4112, DIN 4113-1• Coupling System: Concial connector with bolt and locking pin Dimension and weight:• Lenght: 4000 mm (without connector)• Width: 400 mm • Height: 400 mm• Weight: 26,1 kgDelivery including connector set, consisting of: 4 conical connectors, 8 bolts and 8 locking pins.
905,00 €*
delivery time 14 days
This website uses cookies to ensure the best experience possible. More information...