Amplifiers
The amplifiers are used to amplify the audio signal for driving the loudspeakers
TOPSELLER
Topseller
DAP HP 900 2x 350 W/8 Ohm Amplifier
€415.00*
The DAP HP-900 is a powerful and safe amplifier with bridge, parallel and stereo modesClass AB amplifierMetal housingColor: grayEfficient forced air coolingFull protection circuitsIP rating: IP20 (indoor use only)19"/2U designOutput per channel at 8 ohms from 20 Hz - 20 kHz: 350 WOutput per channel at 4 ohms from 20 Hz - 20 kHz: 450 WBridge output at 8 ohms from 20 Hz - 20 kHz: 900 WOutput channels: 2Output gain: 32 dBOutput mode: Bridge, Parallel, StereoOutput connector: 4-pin speaker connectorInputs:Mono inputs: 2Mono input connector: 3-pin XLRBalanced mono input Sensitivity: 1 dBuAudio specificationsTHD level: < 0.5 %Signal-to-noise ratio: > 100 dBSlope: 13 V/µsAmplifier technology: Class ABAttenuation factor: 100:1Overlay: 75 dBuFrequency response minimum: 10 HzFrequency response maximum: 20000 HzDimensions: (HxWxD): 88 x 483 x 310 mmInstallation depth (without plug): 310 mmWeight: 10.6 kg
Immediately available or ready for collection
DAP HP 500 2x 150 W/8 Ohm Amplifier
€315.00*
The DAP HP-500 is a powerful and safe amplifier with bridge, parallel and stereo modesClass AB amplifierMetal housingColor: grayEfficient forced air coolingFull protection circuitsIP rating: IP20 (indoor use only)19"/2U designOutput per channel at 8 ohms from 20 Hz - 20 kHz: 150 WOutput per channel at 4 ohms from 20 Hz - 20 kHz: 200 WBridge output at 8 ohms from 20 Hz - 20 kHz: 400 WOutput channels: 2Output gain: 32 dBOutput mode: Bridge, Parallel, StereoOutput connector: 4-pin speaker connectorInputs:Mono inputs: 2Mono input connector: 3-pin XLRBalanced mono input Sensitivity: 1 dBuAudio specificationsTHD level: < 0.5 %Signal-to-noise ratio: > 100 dBSlope: 10 V/µsAmplifier technology: Class ABAttenuation factor: 100:1Overlay: 75 dBuFrequency response minimum: 10 HzFrequency response maximum: 20000 HzDimensions: (HxWxD): 88 x 483 x 310 mmInstallation depth (without plug): 310 mmWeight: 8,7 kg
delivery time 14 days
Linea Research 48 M20 8 channel amplifier
€7,919.00*
8-channel Class-D high-performance amplifier with switched-mode power supply8 x 1500W / 2 ohms, 8 x 2500W / 4 ohms, 8 x 1500W / 8 ohms4 x 3000W / 4 Ohm, 4x 5000W / 8 Ohm bridge4 x Analog In, 2 x AES3 In 4 x 8 DSP controllers including linear phase filter, FIR filter and multiband limiting (96kHz / 40 bit float)Grouping functions and multi-layer EQVery comprehensive monitoring with a non-volatile log functionFlexible input current limitationOversized universal power supplyOperation via Ethernet or front panelManufactured in UK
delivery time 14 days
DJP-900P MK2 Class D Amplifier 2x 460W
€349.00*
The compact stereo mixing amplifier DJP-900P with efficient class D output circuitry is particularly suitable for permanent installations in restaurants, gyms and retail locations which require quick-access music playback control. It provides 2 x 460 watts at 4 ohms and makes mixing of a stereo line source and a microphone easy.For double output power it is possible to switch to bridge mode. Then 900 watts are provided.Low-impedance speakers and PA speakers with 100 V audio transformers can be connected. Stream your music wirelessly from your smartphone, tablet or computer via Bluetooth to the built-in audio player, which also offers slots for USB storage devices and SD(HC) memory cards. Extensive protective circuits provide protection e.g. against short circuit, overload and overheating.Output power: 2 x 460 W RMS (4 ohms)2 x 240 W RMS (8 ohms)Max. 260 W bridged (100 V)Max. 900 W bridged (8 ohms)
delivery time 14 days
New
Reloop Dominance 1402 MK2 2x 240W / 8 Ohm power amplifier
€238.00*
Reloop Dominance 1402 MK2 Power AmplifierDominance Reloaded – Reloop Dominance MK2 Series Power AmplifierThe Dominance MK2 Series from Reloop delivers powerful, reliable amplification tailored for gastronomy, business environments, and club installations. Combining intelligent electronics with high-quality craftsmanship, these amplifiers are engineered to perform even under demanding conditions. An extensive protection circuit package prevents unwanted overloads, short circuits, and overheating, ensuring stable operation at all times.Available in 360W and 720W configurations, the MK2 series offers the right solution for any audio technician or sound engineer looking for robust, professional-grade amplification.Key Features:High-performance cooling fanInnovative transistor technologyOversized heat sinks for optimal thermal managementOverload and short circuit protectionHigh reliability and thermal safety shutdownIndependent amplifier circuits for Channel A and BGround/lift switch to eliminate ground loop noiseAluminium cooling tunnel for efficient heat dissipationOutputs: Professional PA speaker cable connectors, screw terminalsInputs: XLR and RCA (Cinch)Technical Specifications:Output Power:2 × 360 W @ 4 Ohms2 × 240 W @ 8 OhmsFrequency Response: 20 Hz – 20 kHzDimensions: 483 × 88 × 350 mmWeight: 10 kg
delivery time 14 days
New
Reloop Dominance 702 MK2 2x 120W / 8 Ohm power amplifier
€178.00*
Reloop Dominance 702 MK2 – Dominance ReloadedDominance Reloaded: The MK2 series of Reloop’s Dominance amplifiers combines intelligent electronics with high-quality construction, delivering a reliable amplification solution for gastronomy, business environments, and club installations. Designed for demanding applications, this amplifier series features an extensive protection circuit package to prevent overloads, short circuits, and thermal damage.Available in 360W and 720W models, the Dominance MK2 range provides the perfect power solution for sound technicians and system integrators seeking durable and efficient performance.Key Features:New front panel designHigh-performance cooling fanAdvanced transistor technologyOversized heat sinks for optimal heat dissipationOverload and short circuit protectionHigh reliability and thermal safety shutdownIndependent amplifier circuits for channel A and BBridgeable mono operationGround/lift switch to eliminate ground loop noiseAluminium cooling tunnelTechnical Specifications – Dominance 702 MK2:Output Power:2 × 180 W @ 4 Ohms2 × 120 W @ 8 OhmsFrequency Response: 20 Hz – 20 kHzInputs: XLR, RCA (Cinch)Outputs: Professional PA speaker cable connectors, screw terminalsDimensions: 483 × 88 × 350 mmWeight: 8.5 kg
delivery time 14 days
Crown XLS 2002 Amplifier 2x 650 Watt/4 Ohm
€599.00*
CROWN XLS 2002 digital amplifier with class D amplifier circuit2x 1.050 watts @ 2 ohms2x 650 watts @ 4 ohms2x 375 watts@ 8 ohmsbridged 1x 2.100 watts @ 4 ohms, monobridged 1x 1.300 watts @ 8 ohms, monoHigh and low pass filter per channelSleep mode with external triggerPeakX limiterVery silent, temperature-dependent fanDamping factor> 2001.4 and 0.775 volts input sensitivityInputs: XLR, Jack, RCA per channelOutputs: Speakon, screw terminals per channelHeight: 2UDepth: 27.2 cm4.9 kgTop Features:New is the energy management. Due to recovering energy the Crown XLS amplifier operates very efficiently. Therefore it is more efficient than conventional amplifiers. Another new feature is the sleep mode and a power trigger for external switch on and off.The large display shows clearly all parameters. The Blackout function, new menus and lockout mode make the operation easy and safe.
delivery time 14 days
Yamaha Px5 Amplifier - 2x 500watts/8ohm
€899.00*
Yamaha PX5Power:2 x 800 W / 4 Ohm,2 x 500 W / 8 Ohm,1 x 800W 8 Ohm Bridge,1 x 1400W 4 Ohm BridgeSpeaker presets allow optimal speaker performance DSP features including D-ContourProcessing Input: XLR + jackOutput: Speaker twist, jack, clamp connectionDimensions (W x H x D): 480 x 88 x 388 mm Construction: 19 "/ 2UWeight: 6.9 kg
Immediately available or ready for collection
Crown XLS XLS 1002 Amplifier 2x 350 Watt/4 Ohm
€459.00*
With Class-D circuitPower: 2x 550 Watt / 2 Ohm, 2x 350 Watt / 4 Ohm, 2x 215 Watt / 8 Ohm, bridged 1x 1100 Watt / 4 Ohm, bridged 1x 700 Watt / 8 OhmAmplifier modes: 2-channel stereo, mono bridged or Y mode24 dB Linkwitz-Riley crossoverInput Sensitivity 1.4 or 0.775 VLarge front display for easy operationBlack-Out mode automatically switches off the displayLock-out mode against incorrect operationRemote power for remotely turning on and offPeakX limiter per channelQuiet, temperature controlled fanRugged metal housing5 status LEDs per channelConnections: XLR, jack and RCA inputs, 2x Speaker Twist and screw outputsDesign: 19" / 2UDepth: 19.6 cmWeight: 3.9 kg
delivery time 14 days
Crown XLS XLS 2502 Amplifier 2x 775 Watt/4 Ohm
€719.00*
CROWN XLS 2502 digital amplifier with class D amplifier circuit2x 1.200 watts @ 2 ohms2x 775 watts @ 4 ohms2x 440 watts@ 8 ohmsbridged 1x 2.400 watts @ 4 ohms, monobridged 1x 1.550 watts @ 8 ohms, monoHigh and low pass filter per channelSleep mode with external triggerPeakX limiterVery silent, temperature-dependent fanDamping factor> 2001.4 and 0.775 volts input sensitivityInputs: XLR, Jack, RCA per channelOutputs: Speakon, screw terminals per channelHeight: 2UDepth: 27.2 cm4.9 kgTop Features:New is the energy management. Due to recovering energy the Crown XLS amplifier operates very efficiently. Therefore it is more efficient than conventional amplifiers. Another new feature is the sleep mode and a power trigger for external switch on and off.The large display shows clearly all parameters. The Blackout function, new menus and lockout mode make the operation easy and safe.
Immediately available or ready for collection
Linea Research ASC48 Dante Card
€799.00*
Linea Research ASC48 Dante Card
Immediately available or ready for collection
Linea Research 44 M20 Dante 4 channel amplifier with on-board DSP with Dante
€7,390.00*
4-channel Class-D high-performance amplifier with switched-mode power supply4 x 5000W / 2 ohms, 4 x 3000W / 4 ohms, 4 x 1500W / 8 ohms2 x 10000W / 4 Ohm bridge4 x Analog In, 2 x AES3 In and Dante compatible4 x 4 DSP controllers including linear phase filter, FIR filter and multiband limiting (96kHz / 40 bit float)Dante network audio interfaceGrouping functions and multi-layer EQVery comprehensive monitoring with a non-volatile log functionFlexible input current limitationOversized universal power supplyOperation via Ethernet or front panelManufactured in UK
delivery time 7 days
Yamaha Px10 Amplifier - 2x 1000watts/8ohm
€1,190.00*
Yamaha PX10Power:2 x 1200 W / 4 Ohm,2 x 1000 W / 8 Ohm,Speaker presets allow optimal speaker performance DSP features including D-ContourProcessing Input: XLR + jackOutput: Speaker twist, jack, clamp connectionDimensions (W x H x D): 480 x 88 x 388 mm Construction: 19 "/ 2UWeight: 7,4 kg
Immediately available or ready for collection
QPRO Audio 4 channel amplifier 1HE 4 x 600W/8Ohm
€1,049.00*
The QLE series amplifiers are 2 or 4 channel amplifiers.All models have a highly efficient switching power supply, which ensures that QLE amplifiers run optimally and stably even at full power.Our digital amplifier technology, msv combined with the use of the best selected electronic components, enables 4 ohms to be used simultaneously on all two or four channels with maximum performance. Packed in a lightweight and compact 1U size.The QLE series is equipped with a switch on the back to adjust the input sensitivity of 0.7 V or 1 V.Nominal output power (THD + N = 1%, msv continue 1 kHz sine wave, control all channels)Rated Output Power(THD+N= 1%,1kHz continue sine wave, all channel driving)8Ohm Stereo: 4x600W4Ohm Stereo: 4x900W16Ohm Bridge: 2x1200W8Ohm Bridge: 2x1800WOutput RMS voltage: 693VSensitivity: 1 Vrms , 0.7 Vrms (msv Rated Power,1kHz)THD+N: 0.05% (10% Rated Power, typical)Cross-talk: >=75dB (20Hz-1kHz,below Rated Power)Frequency response: +-0.2dB (10% Rated Power,20Hz-20kHz,8 )Input impedance: 20k Balance 10k UnbalanceDamp factor: >=1000(8Ohm ,20Hz-200Hz)SNR: >=100dB(A weighted 20Hz-20kHz)Main power: 220VAC 10 (+- % )50/60HzProtection: Under voltage, DC, Over msv temperature, Over load limiter, Short protection.Size(W×H×D): 480x45x352mmNet weight: 6,8kg
Immediately available or ready for collection
Yamaha Px8 Amplifier - 2x 800watts/8ohm
€999.00*
Yamaha PX8Power:2 x 1050 W / 4 Ohm,2 x 800 W / 8 Ohm,Speaker presets allow optimal speaker performance DSP features including D-ContourProcessing Input: XLR + jackOutput: Speaker twist, jack, clamp connectionDimensions (W x H x D): 480 x 88 x 388 mm Construction: 19 "/ 2UWeight: 7,2 kg
Immediately available or ready for collection
Crown XTi 1002 Amplifier 2x 500 Watt/4 Ohm
€679.00*
Crown Xti 1002, DSP control amplifier, 19" 2 U, 2x 700 W (2 Ohm), 500 W (4 Ohm), 275 W (8 Ohm), 1000 W Bridge 8 Ohm, 1400 Watt Bridge 4 Ohm, DSP-Control: Input EQ with 6 parametric Filters per channel with adjustable Q-Shelf and +/- 15 dB Gain, Crossover with High- and Lowpass, per channel with 6/12/18/24 dB per Octave and switchable polarity, Output EQ with 8 parametric Filters per channel with adjustable Q-Faktor and +/- 15 dB Gain, Delay up to 50 ms, Subharmonic Synth, Peak Plus Limiter with adjustable Threshold, Attack and Release, 50 Presets, 3 mode switchable cooling fan, HiQnet Band Manager and System Artchitect Software control by USB-Port Type B, display with temperature of powersupply and voltage, 2x NL 4 Speakon out, Binding Post out, XLR in/out, dimensions: 19" (485mm) x 2 U (89mm) x 311 mm, weight 8,4 Kg
Immediately available or ready for collection
Linea Research 44 M06 4 channel amplifier
€4,799.00*
4-channel Class-D high-performance amplifier with switched-mode power supply4 x 1500W / 2 ohms, 4 x 1500W / 4 ohms, 4 x 1500W / 8 ohms2 x 3000W / 4 Ohm bridge4 x Analog In, 2 x AES3 In 4 x 4 DSP controllers including linear phase filter, FIR filter and multiband limiting (96kHz / 40 bit float)Grouping functions and multi-layer EQVery comprehensive monitoring with a non-volatile log functionFlexible input current limitationOversized universal power supplyOperation via Ethernet or front panelManufactured in UK
delivery time 7 days
Linea Research 44 M10 4 channel amplifier
€5,690.00*
4-channel Class-D high-performance amplifier with switched-mode power supply4 x 2500W / 2 ohms, 4 x 2500W / 4 ohms, 4 x 1500W / 8 ohms2 x 5000W / 4 Ohm bridge4 x Analog In, 2 x AES3 In 4 x 4 DSP controllers including linear phase filter, FIR filter and multiband limiting (96kHz / 40 bit float)Grouping functions and multi-layer EQVery comprehensive monitoring with a non-volatile log functionFlexible input current limitationOversized universal power supplyOperation via Ethernet or front panelManufactured in UK
delivery time 7 days
