The DAP Xi-8 is an elegant 8 inch passive installation speaker with a 1.4" Celestion HF driver for clear Hi-Fi sound. It is particularly suitable for fixed indoor locations. Its ingenious design, with recessed Speaker 4-pin chassis, easily detachable magnet-mount grill and rotatable logo, is perfect for a variety of applications. Also, the speaker can be placed either horizontally or vertically due to its various mounting options. You can even rotate the horn 90 degrees to create the desired sound distribution (60°x90° or 90°x60°).This full-range 2-way speaker can be mounted directly to any ceiling or wall using the optional U-shaped mounting bracket and compact speaker wall bracket. The Xi-8 is not only versatile, it also fits into any environment since it is available in either black or white and works on any 8 O audio infrastructure.The speakers can be connected through either a Speaker 4-pin or green terminal connectors for a quick and cost-effective installation.250 W RMS, max SPL of 125 dB at 1 mClean full-range Hi-Fi sound (2-way system)Multiple mounting & connectivity optionsRotatable horn and logo for vertical mountingEasy detachable magnet mounted grillSpecificationsCollapse All: InputsMono Input Impedance: 8 OhmRMS Input Power: 250 WPeak Input Power: 1000 WPassive Input Connection: Speaker Connector 4 pole , TerminalAudio SpecificationsSpeaker System: 2-waySpeaker Sensitivity (1 W/1 m): 95 dBSpeaker Impedance: 8 OhmMaximum SPL at 1 m: 125 dBFrequency Response Minimum: 55 HzFrequency Response Maximum: 20000 HzFrequency Response (-10 dB) Minimum: 55 HzFrequency Response (-10 dB) Maximum: 20000 HzWoofer Diameter: 8 "Woofer Voice Coil Diameter: 2 "Woofer Magnet Type: FerriteCompression Driver Diameter: 1 "Compression Driver Voice Coil: 1.4 "Compression Driver Magnet Type: FerriteDispersion Angle (Horizontal): 90°Dispersion Angle (Vertical): 60°Mechanical SpecificationsHeight (mm): 430 mmWidth (mm): 290 mmLength (mm): 260 mmMaterial: PlywoodMaterial Thickness: 12 mmColour: WhiteFinish: PaintedWeight: 10.7 kgIP Rating: IP20 (indoor use only)Product PropertiesRotatable Horn: YesUseable as Monitor/Wedge: NoSpeaker Grille Material: SteelRiggingRigging Eye Thread: M8

6.5" satellite speakers with bracket8-ohm speaker pair with 6.5" woofer and 1" tweeterAlso for use with MOLLY-12A subwoofers for 2.1 and 4.1 configurationsOptional stand adaptor required for stand mountingExtension U-bracket and cable available for connecting 2 satellite speakersRated power: 130 W RMS/260 W programConnectors: 1 x speaker and screw plug terminalScratch-resistant lacquer surface and steel grilleWith Mounting bracketPackage contents: 2 x Top, 2 x Mounting bracket, 4 x Knurled screw, 2 x Screw terminalRated power: 130 W RMSProgram power: 260 WFrequency range: 150 - 20000 HzSensitivity: 95 dB (1W/1m)Max. SPL: 119 dBImpedance: 8 ohmsAttachment system: 2x Mounting bracketFlying points: 2 x M8 threadConnections: 1 x speaker built-in socket (F)1 x screw terminalSpeaker: 1 x woofer (6.5") approx. 17 cmVoice coil lows (1") approx. 2,5 cm1 x Tweeter (1") approx. 2,5 cmType of speaker: On-ceiling/on-wall speaker; Coaxial speakerMaterial: MDF (Medium-density fibreboard)Color: BlackWeight: 8,90 kg, 4,45 kg / pc.

Weather-proof column speaker in aluminium cabinet (4 x 4"), with mount, 130 W RMSIntelligible voice and superior sound reproduction2-way system with 4 x 10 cm mid-woofer (4")Durable aluminum cabinet with grillePower selector switch with 8 ohms operating positionWith Mounting bracketSuitable for outdoor use IP56White aluminum grille with acoustic foamFor application areas such as: Installation; sports centres/gyms; multi-purpose hallPackage contents1 x top, 2 x angle, 1 x plug (male), 10 x washer, 4 x screw, 1 x user manualTECHNICAL SPECIFICATIONSIP classification: IP56Power: Program: 260WRated: 130W RMS (8 ohms)Rated: 120W RMS (100V PA)Frequency range: 120 - 18000 HzSensitivity: 94 dB (1W/1m)Max. SPL: 121 dBDispersion angle: 100° x 50°Impedance: 8 ohms; Public address systems 100VAttachment system: Mounting bracketPower tapping: 30W; 60W; 120W RMS via Selector switch switchableConnections: 2-pin screw plug connector (M) mounting version IPCrossover frequency: 1900 HzSpeaker: 4 x woofer 4" with ferrit magnetBasket material: aluminumVoice coil lows 1"Diaphragmmaterial: mylar1 x compression tweeter highs 1" with ferrit magnetVoice coil compression tweeter highs 1,4"Type of speaker: Column speakerType of construction: Closed BoxMaterial: AluminumColor: WhiteDimensions: Width: 12,7 cmDepth: 14,4 cmHeight: 70,4 cmWeight: 10,50 kg

The coaxial loudspeakers of the C-series are equipped with uncompromising housing technology and a perfectly balanced passive crossover. The coaxial speaker technology enables a very compact design and constant coverage with excellent properties. The symmetrical cover of 90 ° enables horizontal and vertical use. The C series is the perfect solution for indoor and outdoor installations and rental applications. All full-range loudspeakers and subwoofers in the C series are equipped with a U bracket as standard. The passive 15-inch subwoofer of the C series with a 100 mm voice coil and a precisely matched compact housing is the perfect extension for all full range loudspeakers of the C series.Weatherproof housing IP 54High performance H coaxial speakerHigh driver PTC protection90 ° x 90 ° beam angle, C15 with 90 ° x 70 ° beam angleSubwoofer with integrated rigging pointsU-bracket as standardOptional array adapter for cluster applicationsOptional Speakon protective coverActive subwoofer with integrated 3-channel amplifier and DSPRemote control softwareTechnical specifications:System: 10"/1" coaxial, full rangeFrequency range (-10 dB): 55 Hz - 20 kHzCover pattern HxV: 90 ° x 90 °Crossover frequency: 1700 Hz passiveRated power (AES / program): 350W / 700WMaximum sound pressure: 128 dB SPLSystem sensitivity (1 W / 1 m): 97 dB SPLNominal impedance: 8 ohmsSpeakers: 10C350Enclosure: 15mm, birch plywoodSuspension / assembly: 4 x M6, 2x M10Finished: Black polyurea couting, IP 54Grid: powder coated, black perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4 1 + / 1- 2 + / 2- to SUBDimensions (W x H x D): 300 mm x 360 mm x 300 mmNet weight: 15 kgOptional accessories: Speakon protection coverBox flange black KM-19580Screw-on flange KM-24281

The coaxial loudspeakers of the C-series are equipped with uncompromising housing technology and a perfectly balanced passive crossover. The coaxial speaker technology enables a very compact design and constant coverage with excellent properties. The symmetrical cover of 90 ° enables horizontal and vertical use. The C series is the perfect solution for indoor and outdoor installations and rental applications. All full-range loudspeakers and subwoofers in the C series are equipped with a U bracket as standard. The passive 15-inch subwoofer of the C series with a 100 mm voice coil and a precisely matched compact housing is the perfect extension for all full range loudspeakers of the C series.Weatherproof housing IP 54High performance H coaxial speakerHigh driver PTC protection90 ° x 90 ° beam angle, C15 with 90 ° x 70 ° beam angleSubwoofer with integrated rigging pointsU-bracket as standardOptional array adapter for cluster applicationsOptional Speakon protective coverActive subwoofer with integrated 3-channel amplifier and DSPRemote control softwareTechnical specifications:System: 15"/1,4" coaxial, full rangeFrequency range (-10 dB): 52 Hz - 20 kHzCover pattern HxV: 90 ° x 70 °Crossover frequency: 1200 Hz passiveRated power (AES / program): 800W / 1600WMaximum sound pressure: 134 dB SPLSystem sensitivity (1 W / 1 m): 101 dB SPLNominal impedance: 8 ohmsSpeakers: 15C800Enclosure: 15mm, birch plywoodSuspension / assembly: 4x M10Finished: Black polyurea couting, IP 54Grid: powder coated, black perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4 1 + / 1- 2 + / 2- to SUBDimensions (W x H x D): 420 mm x 540 mm x 420 mmNet weight: 28 kgOptional accessories: Speakon protection coverBox flange black KM-19580Screw-on flange KM-24281

The coaxial loudspeakers of the C-series are equipped with uncompromising housing technology and a perfectly balanced passive crossover. The coaxial speaker technology enables a very compact design and constant coverage with excellent properties. The symmetrical cover of 90 ° enables horizontal and vertical use. The C series is the perfect solution for indoor and outdoor installations and rental applications. All full-range loudspeakers and subwoofers in the C series are equipped with a U bracket as standard. The passive 15-inch subwoofer of the C series with a 100 mm voice coil and a precisely matched compact housing is the perfect extension for all full range loudspeakers of the C series.Weatherproof housing IP 54High performance H coaxial speakerHigh driver PTC protection90 ° x 90 ° beam angle, C15 with 90 ° x 70 ° beam angleSubwoofer with integrated rigging pointsU-bracket as standardOptional array adapter for cluster applicationsOptional Speakon protective coverActive subwoofer with integrated 3-channel amplifier and DSPRemote control softwareTechnical specifications:System: 4.5" wideband, full rangeFrequency range (-10 dB): 100 Hz - 18 kHzCover pattern HxV: 90 ° x 90 °Crossover frequency: widebandRated power (AES / program): 100W / 200WMaximum sound pressure: 116 dB SPLSystem sensitivity (1 W / 1 m): 92 dB SPLNominal impedance: 8 ohmsSpeakers: 4C80Enclosure: 12mm, birch plywoodSuspension / assembly: 10 x M6Finished: Black polyurea couting, IP 54Grid: powder coated, black perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4 1 + / 1- 2 + / 2- to SUBDimensions (W x H x D): 150 mm x 180 mm x 150 mmNet weight: 2 kgOptional accessories: Speakon protection coverBox flange black KM-19580Screw-on flange KM-24281

The coaxial loudspeakers of the C-series are equipped with uncompromising housing technology and a perfectly balanced passive crossover. The coaxial speaker technology enables a very compact design and constant coverage with excellent properties. The symmetrical cover of 90 ° enables horizontal and vertical use. The C series is the perfect solution for indoor and outdoor installations and rental applications. All full-range loudspeakers and subwoofers in the C series are equipped with a U bracket as standard. The passive 15-inch subwoofer of the C series with a 100 mm voice coil and a precisely matched compact housing is the perfect extension for all full range loudspeakers of the C series.Weatherproof housing IP 54High performance H coaxial speakerHigh driver PTC protection90 ° x 90 ° beam angle, C15 with 90 ° x 70 ° beam angleSubwoofer with integrated rigging pointsU-bracket as standardOptional array adapter for cluster applicationsOptional Speakon protective coverActive subwoofer with integrated 3-channel amplifier and DSPRemote control softwareTechnical specificationsSystem: 6"/1" coaxial, full rangeFrequency range (-10 dB): 80 Hz - 20 kHzCover pattern HxV: 90 ° x 90 °Crossover frequency: 2250 Hz passiveRated power (AES / program): 250W / 500WMaximum sound pressure: 123 dB SPLSystem sensitivity (1 W / 1 m): 96 dB SPLNominal impedance: 8 ohmsSpeakers: 6C250Enclosure: 12mm, birch plywoodSuspension / assembly: 8 x M6, 2x M10Finished: Black polyurea couting, IP 54Grid: powder coated, black perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4 1 + / 1- 2 + / 2- to SUBDimensions (W x H x D): 200 mm x 240 mm x 200 mmNet weight: 7 kgOptional accessories: Speakon protection coverBox flange black KM-19580Screw-on flange KM-24281

The coaxial loudspeakers of the C-series are equipped with uncompromising housing technology and a perfectly balanced passive crossover. The coaxial speaker technology enables a very compact design and constant coverage with excellent properties. The symmetrical cover of 90 ° enables horizontal and vertical use. The C series is the perfect solution for indoor and outdoor installations and rental applications. All full-range loudspeakers and subwoofers in the C series are equipped with a U bracket as standard. The passive 15-inch subwoofer of the C series with a 100 mm voice coil and a precisely matched compact housing is the perfect extension for all full range loudspeakers of the C series.Weatherproof housing IP 54High performance H coaxial speakerHigh driver PTC protection90 ° x 90 ° beam angle, C15 with 90 ° x 70 ° beam angleSubwoofer with integrated rigging pointsU-bracket as standardOptional array adapter for cluster applicationsOptional Speakon protective coverActive subwoofer with integrated 3-channel amplifier and DSPRemote control softwareTechnical specifications:System: 8"/1" coaxial, full rangeFrequency range (-10 dB): 55 Hz - 20 kHzCover pattern HxV: 90 ° x 90 °Crossover frequency: 1800 Hz passiveRated power (AES / program): 300W / 600WMaximum sound pressure: 124 dB SPLSystem sensitivity (1 W / 1 m): 96 dB SPLNominal impedance: 8 ohmsSpeakers: 8C300Enclosure: 15mm, birch plywoodSuspension / assembly: 8 x M6, 2x M10Finished: Black polyurea couting, IP 54Grid: powder coated, black perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4 1 + / 1- 2 + / 2- to SUBDimensions (W x H x D): 230 mm x 276 mm x 230 mmNet weight: 10 kgOptional accessories: Speakon protection coverBox flange black KM-19580Screw-on flange KM-24281

The coaxial loudspeakers of the C-series are equipped with uncompromising housing technology and a perfectly balanced passive crossover. The coaxial speaker technology enables a very compact design and constant coverage with excellent properties. The symmetrical cover of 90 ° enables horizontal and vertical use. The C series is the perfect solution for indoor and outdoor installations and rental applications. All full-range loudspeakers and subwoofers in the C series are equipped with a U bracket as standard. The passive 15-inch subwoofer of the C series with a 100 mm voice coil and a precisely matched compact housing is the perfect extension for all full range loudspeakers of the C series.Weatherproof housing IP 54High performance H coaxial speakerHigh driver PTC protection90 ° x 90 ° beam angle, C15 with 90 ° x 70 ° beam angleSubwoofer with integrated rigging pointsU-bracket as standardOptional array adapter for cluster applicationsOptional Speakon protective coverActive subwoofer with integrated 3-channel amplifier and DSPRemote control softwareTechnical specifications:System: 8"/1" coaxial, full rangeFrequency range (-10 dB): 55 Hz - 20 kHzCover pattern HxV: 90 ° x 90 °Crossover frequency: 1800 Hz passiveRated power (AES / program): 300W / 600WMaximum sound pressure: 124 dB SPLSystem sensitivity (1 W / 1 m): 96 dB SPLNominal impedance: 8 ohmsSpeakers: 8C300Enclosure: 15mm, birch plywoodSuspension / assembly: 8 x M6, 2x M10Finished: white polyurea couting, IP 54Grid: powder coated, white perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4 1 + / 1- 2 + / 2- to SUBDimensions (W x H x D): 230 mm x 276 mm x 230 mmNet weight: 10 kgOptional accessories: Speakon protection coverBox flange black KM-19580Screw-on flange KM-24281

The passive loudspeakers of the E series are multifunctional full-range and monitor loudspeakers.Equipped with uncompromising chassis technology and perfectly balanced passive crossovers, the E series offers excellent sound quality and high dynamics.Ideal as a FOH speaker, msv delay line, monitor, front fill on small to medium-sized stages or in installations where high sound quality is required.The rotatable 90 ° x 60 ° horn enables use in horizontal or vertical direction.The 18-inch subwoofer of the E series with a 100 mm voice coil and a precisely tuned housing msv is the perfect extension when very low frequencies with excellent dynamics are required.RF compression driver with 44 mm voice coilLF loudspeaker with 65 to 100 mm voice coilsNominal cover 90 ° x 60 °Rotatable hornsCompact designSpeaker stand adapterErgonomic handlesFull range speaker with 45 ° monitor angle2 x 10 mm rigging points msv for EB mounts10 additional M8 rigging pointsBlack structured coatingSystem: 10"/1" multipurpose full range Frequency Range (-10 dB): 50 Hz - 20 kHzCoverage Pattern HxV: 90 x 60 rotatableCrossover Frequency :1850 Hz passivePower Rating (AES/Program): 250W / 500WMaximum SPL***: 126dB SPL peakSystem Sensitivity (1w/1m): 96 dB SPLNominal Impedance: 8 OhmsLF Driver: 10Q250HF Driver: Q44Enclosure: 15mm, brich plywoodSuspension / Mounting: 35mm pole socket, 10x M8, 2x M10 for optional EB 10 bracketTransport: 1x intergrated handleFinish: Black textured coatingGrille: Powder coated, black perforated steel with acoustic cloth insieInput Connectors: 2x Neutrik Speakon NL4Dimensions (W x H x D): 300mm x 504mm x 280mmNet Weight: 12 kgOptional Accessories: EB10 U-bracket, EC 10 Black Cover

The passive loudspeakers of the E series are multifunctional full-range and monitor loudspeakers.Equipped with uncompromising chassis technology and perfectly balanced msv passive crossovers, the E series offers excellent sound quality and high dynamics.Ideal as a FOH speaker, delay line, monitor, front fill on small to medium-sized stages or in installations where msv high sound quality is required.The rotatable 90 ° x 60 ° horn enables use in horizontal or vertical direction.The 18-inch subwoofer of the E series with a 100 mm voice coil and a precisely tuned housing is the perfect extension when very low frequencies with excellent dynamics are required.RF compression driver with 44 mm voice coilLF loudspeaker with 65 to 100 mm voice coilsNominal cover 90 ° x 60 °Rotatable hornsCompact designSpeaker stand msv adapterErgonomic handlesFull range speaker with 45 ° monitor angle2 x 10 mm rigging points for EB mounts10 additional M8 rigging pointsBlack structured coatingSystem: 12"/1" multipurpose full rangeFrequency Range (-10 dB):44 Hz - 20 kHzCoverage Pattern HxV: 90 x 60 rotatableCrossover Frequency: 1850 Hz passivePower Rating (AES/Program): 400W / 800WMaximum SPL***: 130dB SPL peakSystem Sensitivity (1w/1m): 98 dB SPLNominal Impedance: 8 OhmsLF Driver: 12Q400HF Driver: Q44Enclosure: 15mm, brich plywoodSuspension / Mounting: 35mm pole socket, 10x M8, 2x M10 for optional EB 12 bracketTransport: 1x intergrated handleFinish: Black textured coatingGrille: Powder coated, black perforated steel with acoustic cloth insieInput Connectors: 2x Neutrik Speakon NL4Dimensions (W x H x D): 362mm x 600mm x 353mmNet Weight: 15 kgOptional Accessories: EB12 U-bracket, EC 12 Black Cover

The passive loudspeakers of the E series are multifunctional full-range and monitor loudspeakers.Equipped with uncompromising chassis technology msv and perfectly balanced passive crossovers, the E series offers excellent sound quality and high dynamics.Ideal as a FOH speaker, delay line, monitor, front fill on small to medium-sized msv stages or in installations where high sound quality is required.The rotatable 90 ° x 60 ° horn enables use in horizontal or vertical direction.The 18-inch subwoofer of the E series with a 100 mm voice coil and a precisely tuned housing is the perfect extension when very low frequencies with excellent dynamics are required.RF compression driver with 44 mm voice coilLF loudspeaker with 65 to 100 mm voice coilsNominal cover 90 ° x 60 °Rotatable hornsCompact designSpeaker stand adapterErgonomic handlesFull range speaker with 45 ° monitor angle2 x 10 mm rigging points for EB msv mounts10 additional M8 rigging pointsBlack structured coatingSystem 15"/1" multipurpose full rangeFrequency Range (-10 dB): 40 Hz - 20 kHzCoverage Pattern HxV: 90 x 60 rotatableCrossover Frequency: 1650 Hz passivePower Rating (AES/Program): 600W / 1200WMaximum SPL***: 132dB SPL peakSystem Sensitivity (1w/1m): 98 dB SPLNominal Impedance: 8 OhmsLF Driver: 15Q600HF Driver: Q44Enclosure: 15mm, brich msv plywoodSuspension / Mounting: 35mm pole socket, 10x M8, 2x M10 for optional EB 15 bracketTransport: 1x intergrated handleFinish: Black textured coatingGrille: Powder coated, black perforated steel with acoustic cloth insieInput Connectors: 2x Neutrik Speakon NL4Dimensions (W x H x D): 420mm x 670mm x 372mmNet Weight: 17 kgOptional Accessories: EB15 U-bracket, EC 15 Black Cover

The M-Series loudspeakers are allrounders for a wide range of applications. From a 2 x 6.5"/1" System to a 12"/1.4" System, up to a 4 x 6.5"/3 x 1" fully horn loaded System the M-Series can be used for Rental, Installation, Churches, Stadions, Clubs or Bars. Equipped with uncompromising chassis technology and perfect balanced passive crossovers, the M-Series loudspeaker technology allows a very compact and light weight design. The constant coverage and excellent tonal balance with high dynamic delivers outstanding, distortion free performance also at very high level. Beside the M64 Vertical Array, the M12 and M62 are equipped with rotatable horns to allow the horizontal and vertical use. The C-Series is the perfect solution for indoor outdoor installations and rental applications. The M-Series speakers can be perfectly combined with all C-Series active and passive subwoofers where really clear, deep and loud low frequency reproduction is needed. Perfect matching accessories, like U-Brackets with quick angle adjustment system or fly bars and system array bars are available as on option. Weatherproof cabinet IP 54 Polyurea coating for long lasting permanent installation Perforated, galvanized and anodized front grill High performance FE and ND loudspeakers and High drivers PM 4 Technology High driver PTC protection Constant dispersion Rotatable hornsPerfect matching accessories Optional vertical array bar for cluster application Optional Speakon protection cover System: 12"/1,4", multipurpose, full rangeFrequency Range (-dB): 50 Hz - 20 kHzCoverage Pattern HxV: 90° x 40°Crossover Frequency: widebandPower Rating (AES/Program): 600W / 1200WMaximum SPL: 131 dB SPLSystem Sensitivity (1w/1m): 100 dB SPLNominal Impedance: 8 OhmsSpeaker Low: 12BM600Speaker High: QMB 144Enclosure: 15mm, birch plywoodSuspension / Mountig: 5x M8, 2x M10, Speaker Stand AdapterFinish: Black polyures coating, IP 54Grille: Powder coated, black perforated steel with acoustic cloth insideInput Connectors: 2x Speakon NL4 1+/1- / 2+/2- to SUBDimension (WxHXD): 350 mm x 590 mm x 324 mmNet Weight: 21 kgOptional Accesories: Speakon protection CoverMB12 Bracket

The M-Series loudspeakers are allrounders for a wide range of applications. From a 2 x 6.5"/1" System to a 12"/1.4" System, up to a 4 x 6.5"/3 x 1" fully horn loaded System the M-Series can be used for Rental, Installation, Churches, Stadions, Clubs or Bars. Equipped with uncompromising chassis technology and perfect balanced passive crossovers, the M-Series loudspeaker technology allows a very compact and light weight design. The constant coverage and excellent tonal balance with high dynamic delivers outstanding, distortion free performance also at very high level. Beside the M64 Vertical Array, the M12 and M62 are equipped with rotatable horns to allow the horizontal and vertical use. The C-Series is the perfect solution for indoor outdoor installations and rental applications. The M-Series speakers can be perfectly combined with all C-Series active and passive subwoofers where really clear, deep and loud low frequency reproduction is needed. Perfect matching accessories, like U-Brackets with quick angle adjustment system or fly bars and system array bars are available as on option. Weatherproof cabinet IP 54 Polyurea coating for long lasting permanent installation Perforated, galvanized and anodized front grill High performance FE and ND loudspeakers and High drivers PM 4 Technology High driver PTC protection Constant dispersion Rotatable hornsPerfect matching accessories Optional vertical array bar for cluster application Optional Speakon protection cover System: 2x 6,5"/1", full rangeFrequency Range (-dB): 55 Hz - 20 kHzCoverage Pattern HxV: 90° x 60°Crossover Frequency: 1,800 Hz passivePower Rating (AES/Program): 400W / 800WMaximum SPL: 125 dB SPLSystem Sensitivity (1w/1m): 96 dB SPLNominal Impedance: 4 OhmsSpeaker Low: 2x 6B200Speaker High: 1x QPM44Enclosure: 15mm, birch plywoodSuspension / Mountig: 3x M8, 2x M10, Speaker Stand AdapterFinish: Black polyures coating, IP 54Grille: Powder coated, black perforated steel with acoustic cloth insideInput Connectors: 2x Speakon NL4 1+/1- / 2+/2- to SUBDimension (WxHXD): 190 mm x 570 mm x 230 mmNet Weight: 10 kgOptional Accesories: Speakon protection CoverMB62 Bracket

The M-Series loudspeakers are allrounders for a wide range of applications. From a 2 x 6.5"/1" System to a 12"/1.4" System, up to a 4 x 6.5"/3 x 1" fully horn loaded System the M-Series can be used for Rental, Installation, Churches, Stadions, Clubs or Bars. Equipped with uncompromising chassis technology and perfect balanced passive crossovers, the M-Series loudspeaker technology allows a very compact and light weight design. The constant coverage and excellent tonal balance with high dynamic delivers outstanding, distortion free performance also at very high level. Beside the M64 Vertical Array, the M12 and M62 are equipped with rotatable horns to allow the horizontal and vertical use. The C-Series is the perfect solution for indoor outdoor installations and rental applications. The M-Series speakers can be perfectly combined with all C-Series active and passive subwoofers where really clear, deep and loud low frequency reproduction is needed. Perfect matching accessories, like U-Brackets with quick angle adjustment system or fly bars and system array bars are available as on option. Weatherproof cabinet IP 54 Polyurea coating for long lasting permanent installation Perforated, galvanized and anodized front grill High performance FE and ND loudspeakers and High drivers PM 4 Technology High driver PTC protection Constant dispersion Perfect matching accessories Optional vertical array bar for cluster application Optional Speakon protection cover System: 4x 6,5"/3x1", horn loaded vertical ArrayFrequency Range (-dB): 80 Hz - 20 kHzCoverage Pattern HxV: 110° x 20°Crossover Frequency: 1,500 Hz passivePower Rating (AES/Program): 1000W / 2000WMaximum SPL: 138 dB SPLSystem Sensitivity (1w/1m): 105 dB SPLNominal Impedance: 8 OhmsSpeaker Low: 4x 6M250Speaker High: 3x QPM44Enclosure: 15mm, birch plywoodSuspension / Mountig: 2x M8, 6x M10Finish: Black polyures coating, IP 54Grille: Powder coated, black perforated steel with acoustic cloth insideInput Connectors: 2x Speakon NL4 1+/1- / 2+/2- to SUBDimension (WxHXD): 370 mm x 530 mm x 375 mmNet Weight: 20 kgOptional Accesories: Speakon protection CoverMB64 Bracket, CB64 Connection bar

During the P-Series concept development we and our industry partners have created a new generation of horn loaded point source systems. Together with our weil known leading suppliers and international top partners, we have created high end sound systems with outstanding performance, perfect tonal balance and impressive distortion free SPL. All single parts are selected and combined together in the best technical and acoustical way. The P-Series is constructed as a range of reinforcement systems, which combines lightweight Neodym components, and perfect tuned passive crossovers to a maximum of performance and sonic clarity. The perfectly constructed easy to use rigging system is designed for most flexible sound reinforcement applications, from basic setups for conferences up to large live events or installations. Even in most advanced acoustic challenges, the P-Series is the perfect choise. The P-Series speakers can be perfectly combined with all B-Series active and passive subwoofers where really clear, deep and loud low frequency reproduction is needed. Weatherproof cabinet IP 54 Polyurea coating for outdoor installation Perforated, galvanized and anodized front grill Airflow optimized front grill High performance FE and ND components PM 4 Technology High driver PTC protection Constant dispersion Rotatable horns Self lock U-Bracket system Ergonomic grip handles Perfect matching accessories Optional Fly bar System: 2x 8"/1,4" Point Source, full range Frequency Range (-10 dB): 60 Hz - 20 kHzCoverage Pattern HxV: 90 x 40Crossover Frequency :1300 Hz passivePower Rating (AES/Program): 1000W / 2000WMaximum SPL***: 136dB SPL peakSystem Sensitivity (1w/1m): 100 dB SPLNominal Impedance: 4 OhmsLF Driver: 8" Beyma Custom MadeHF Driver: 1,4" Beyma Custom MadeEnclosure: 15mm, brich plywoodSuspension / Mounting: 35mm pole socket, 10x M8, 2x M10Transport: 2x intergrated handleFinish: Black Polyurea coating IP54Grille: Powder coated, black perforated steel with acoustic cloth insieInput Connectors: 2x Neutrik Speakon NL4Dimensions (W x H x D): 270mm x 590mm x 300mmNet Weight: 18 kgOptional Accessories: Dpeakon protection cover, PB82 Bracket, VAB 82 Vertical array bar

During the P-Series concept development we and our industry partners have created a new generation of horn loaded point source systems. Together with our weil known leading suppliers and international top partners, we have created high end sound systems with outstanding performance, perfect tonal balance and impressive distortion free SPL. All single parts are selected and combined together in the best technical and acoustical way. The P-Series is constructed as a range of reinforcement systems, which combines lightweight Neodym components, and perfect tuned passive crossovers to a maximum of performance and sonic clarity. The perfectly constructed easy to use rigging system is designed for most flexible sound reinforcement applications, from basic setups for conferences up to large live events or installations. Even in most advanced acoustic challenges, the P-Series is the perfect choise. The P-Series speakers can be perfectly combined with all B-Series passive subwoofers where really clear, deep and loud low frequency reproduction is needed. Weatherproof cabinet IP 54 Polyurea coating for outdoor installation Perforated, galvanized and anodized front grill Airflow optimized front grill High performance FE and ND components PM 4 Technology High driver PTC protection Constant dispersion Rotatable horns Self lock U-Bracket system Ergonomic grip handles Perfect matching accessories Optional Fly bar System: 14"/6.5"/1" Horn loaded, full range Frequency Range (-10 dB): 48 Hz - 20 kHzCoverage Pattern HxV: 90 x 40 rotatableCrossover Frequency :450Hz / 2200 Hz passivePower Rating (AES/Program): 800W / 1600WMaximum SPL***: 136dB SPL peakSystem Sensitivity (1w/1m): 101 dB SPLNominal Impedance: 8 OhmsLF Driver: 14" Beyma Custom MadeMF Driver: 6,5" Beyma Custom MadeHF Driver: 1" Beyma Custom MadeEnclosure: 15mm, brich plywoodSuspension / Mounting: 35mm pole socket, 10x M8, 2x M10Transport: 3x intergrated handleFinish: Black Polyurea coating IP54Grille: Powder coated, black perforated steel with acoustic cloth insieInput Connectors: 2x Neutrik Speakon NL4Dimensions (W x H x D): 370mm x 646mm x 400mmNet Weight: 23 kgOptional Accessories: PB153 Bracket

During the P-Series concept development we and our industry partners have created a new generation of horn loaded point source systems. Together with our weil known leading suppliers and international top partners, we have created high end sound systems with outstanding performance, perfect tonal balance and impressive distortion free SPL. All single parts are selected and combined together in the best technical and acoustical way. The P-Series is constructed as a range of reinforcement systems, which combines lightweight Neodym components, and perfect tuned passive crossovers to a maximum of performance and sonic clarity. The perfectly constructed easy to use rigging system is designed for most flexible sound reinforcement applications, from basic setups for conferences up to large live events or installations. Even in most advanced acoustic challenges, the P-Series is the perfect choise. The P-Series speakers can be perfectly combined with all B-Series passive subwoofers where really clear, deep and loud low frequency reproduction is needed. Weatherproof cabinet IP 54 Polyurea coating for outdoor installation Perforated, galvanized and anodized front grill Airflow optimized front grill High performance FE and ND components PM 4 Technology High driver PTC protection Constant dispersion Rotatable horns Self lock U-Bracket system Ergonomic grip handles Perfect matching accessories Optional Fly bar System: 2x 10"/6.5"/1" Horn loaded Point Source, full range Frequency Range (-10 dB): 60 Hz - 20 kHzCoverage Pattern HxV: 90 x 40 rotatableCrossover Frequency :450Hz / 2200 Hz passivePower Rating (AES/Program): 1400W / 2800WMaximum SPL***: 141dB SPL peakSystem Sensitivity (1w/1m): 104 dB SPLNominal Impedance: 4 OhmsLF Driver: 2x 10" Beyma Custom MadeMF Driver: 6,5" Beyma Custom MadeHF Driver: 1" Beyma Custom MadeEnclosure: 15mm, brich plywoodSuspension / Mounting: 35mm pole socket, 10x M8, 2x M10Transport: 2x intergrated handleFinish: Black Polyurea coating IP54Grille: Powder coated, black perforated steel with acoustic cloth insieInput Connectors: 2x Neutrik Speakon NL4Dimensions (W x H x D): 320mm x 650mm x 355mmNet Weight: 25 kgOptional Accessories: PB213 Bracket

ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.1.4" compression driver with 3" voice coil15" woofer, high power, 3.5" voice coil133 dB max splInput Power Rating: 650 W AESAcoustical specifications FREQUENCY RESPONSE (-10DB): 55 Hz ÷ 20000 HzMAX SPL @ 1M: 133 dBHORIZONTAL COVERAGE ANGLE: 90°VERTICAL COVERAGE ANGLE: 60°SYSTEM SENSITIVITY: 99 dBPower section CROSSOVER FREQUENCIES: 1400Transducers COMPRESSION DRIVER: 1 x 1.4'' neo, 3.0'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 110 W AES, 220 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 109 dB, 1W @ 1mWOOFER: 15'' neo, 3.5'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 650 W AES, 1300 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 98 dB, 1W @ 1mInput/Output sectionINPUT CONNECTORS: SpeakonOUTPUT CONNECTORS: SpeakonStandard compliance CE MARKING: YesPhysical specifications COLOR: BlackHARDWARE: 2 x M10HANDLES: 1 Top, 2 SidePOLE MOUNT/CAP: YesGRILLE: SteelCABINET/CASE MATERIAL: PP CompositeSize WIDTH: 437 mm / 17.2 inchesDEPTH: 389 mm / 15.31 inchesHEIGHT: 708 mm / 27.87 inchesWEIGHT: 20.5 kg / 45.19 lbs

COMPACT M 06 is a multipurpose two-way full-range speaker system, suitable for a wide range of applications. Its balanced sound is a big asset in near-field applications for the best intelligibility. The M 06 features high sensitivity, typical of professional audio cabinets thanks to the use of oversized magnets and a HI-FI sound quality, with smooth and wide frequency response, thanks to the wave-guided neodymium dome tweeter. The SPL level of low-distortion audio the M 06 can provide goes far beyond expectations of such a compact solution. The elegant and compact design with accurate finishing makes M 06 suitable for almost any environment, even with architectural constraints. Optional mounting accessories allow using M 06 on wall or ceiling installations.FEATURES100 W RMS power handling116 dB max SPL60 ÷ 20000 Hz frequency range120° x 80° constant directivity coverage angle1 x 6" high power woofer1 x 1" voice coil neodymium dome tweeterHigh quality plywood cabinetSteel front grille with clothingInstallation points available on rear, top and bottom panels4 pole EUROBLOCK connector (audio input and parallel link output)ACOUSTICAL SPECIFICATIONSFrequency Response (-10dB): 60 Hz ÷ 20000 HzMax SPL @ 1m: 116 dBHorizontal coverage angle: 120°Vertical coverage angle: 80°Directivity index Q: 7System Sensitivity: 90 dBPOWER SECTIONNominal Impedance: 8 ohmPower Handling: 100 W RMSPeak Power Handling: 400 W PEAKRecommended Amplifier: 200 WProtections: Dynamic active mosfetCrossover Frequencies: 2200 HzTRANSDUCERSDome Tweeter: 1.3'' neo, 1.0'' v.cWoofer: 6.0'', 1.5'' v.cINPUT/OUTPUT SECTIONInput connectors: EuroblockOutput connectors: EuroblockSTANDARD COMPLIANCECE compliance: YesPHYSICAL SPECIFICATIONSCabinet/Case Material: PlywoodHardware: 4 x M6, 2 x M8Grille: Steel with clothingColor: White - RAL 9003SIZEHeight: 365 mm / 14.37 inchesWidth: 211 mm / 8.31 inchesDepth: 232 mm / 9.13 inchesWeight: 5.5 kg / 12.13 lbs

MR 40 is a bass- reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make the MR 40 the perfect speaker for listening in demanding applications.40W RMS power handling108 dB max SPL70 ÷ 20000 Hz frequency range110° x 100° coverage angles1 x 4" woofer (1’’ v.c.)1 x 1" neodyminum dome tweeter (0.8’’ v.c.)Self-extinguishing plastic cabinetSwivel wall mount accessory includedM6 inserts available for optional U bracket4 pole EUROBLOCK connector Acoustical specificationsFREQUENCY RESPONSE (-10DB): 70 Hz ÷ 20000 HzMAX SPL @ 1M: 108 dBHORIZONTAL COVERAGE ANGLE: 110°VERTICAL COVERAGE ANGLE: 100°DIRECTIVITY INDEX Q: 7SYSTEM SENSITIVITY: 86 dBPower section NOMINAL IMPEDANCE (OHM): 8 ohmPOWER HANDLING: 40 W RMSPEAK POWER HANDLING: 160 W PEAKRECOMMENDED AMPLIFIER: 80 WPROTECTIONS: Bulb lampCROSSOVER FREQUENCIES: 3000 HzTransducers DOME TWEETER: 1.0'' neo, 0.8'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 10 W AES, 20 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 93 dB, 1W @ 1mWOOFER: 4.0'', 1.0'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 40 W AES, 80 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 86 dB, 1W @ 1mInput/Output section INPUT CONNECTORS: EuroblockOUTPUT CONNECTORS: EuroblockStandard compliance CE MARKING: YesPhysical specifications COLOR: Black - RAL 9005 HARDWARE: Wall mount bracketGRILLE: SteelCABINET/CASE MATERIAL: PlasticSize WIDTH: 154 mm / 6.06 inchesDEPTH: 135 mm / 5.31 inchesHEIGHT: 216 mm / 8.5 inchesWEIGHT: 2.2 kg / 4.85 lbs

MR 40 is a bass- reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make the MR 40 the perfect speaker for listening in demanding applications.40W RMS power handling108 dB max SPL70 ÷ 20000 Hz frequency range110° x 100° coverage angles1 x 4" woofer (1’’ v.c.)1 x 1" neodyminum dome tweeter (0.8’’ v.c.)Self-extinguishing plastic cabinetSwivel wall mount accessory includedM6 inserts available for optional U bracket4 pole EUROBLOCK connector Acoustical specificationsFREQUENCY RESPONSE (-10DB): 70 Hz ÷ 20000 HzMAX SPL @ 1M: 108 dBHORIZONTAL COVERAGE ANGLE: 110°VERTICAL COVERAGE ANGLE: 100°DIRECTIVITY INDEX Q: 7SYSTEM SENSITIVITY: 86 dBPower section NOMINAL IMPEDANCE (OHM): 8 ohmPOWER HANDLING: 40 W RMSPEAK POWER HANDLING: 160 W PEAKRECOMMENDED AMPLIFIER: 80 WPROTECTIONS: Bulb lampCROSSOVER FREQUENCIES: 3000 HzTransducers DOME TWEETER: 1.0'' neo, 0.8'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 10 W AES, 20 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 93 dB, 1W @ 1mWOOFER: 4.0'', 1.0'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 40 W AES, 80 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 86 dB, 1W @ 1mInput/Output section INPUT CONNECTORS: EuroblockOUTPUT CONNECTORS: EuroblockStandard compliance CE MARKING: YesPhysical specifications COLOR: White - RAL 9003 HARDWARE: Wall mount bracketGRILLE: SteelCABINET/CASE MATERIAL: PlasticSize WIDTH: 154 mm / 6.06 inchesDEPTH: 135 mm / 5.31 inchesHEIGHT: 216 mm / 8.5 inchesWEIGHT: 2.2 kg / 4.85 lbs

MR 50 is a bass- reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 50 the perfect speaker for listening in the most demanding applications.60W RMS power handling110 dB max SPL60 ÷ 20000 Hz frequency range110° x 100° coverage angles1 x 5" woofer (1’’ v.c.)1 x 1" neodymium dome tweeter (0.8’’ v.c.)Self-extinguishing plastic cabinetSwivel wall mount accessory includedM6 inserts available for optional U bracket4 pole EUROBLOCK connectorAcoustical specificationsFREQUENCY RESPONSE (-10DB): 60 Hz ÷ 20000 HzMAX SPL @ 1M: 110 dBHORIZONTAL COVERAGE ANGLE: 110°VERTICAL COVERAGE ANGLE: 100°DIRECTIVITY INDEX Q: 7SYSTEM SENSITIVITY: 87 dBPower section NOMINAL IMPEDANCE (OHM): 8 ohmPOWER HANDLING: 60 W RMSPEAK POWER HANDLING: 240 W PEAKRECOMMENDED AMPLIFIER: 120 WPROTECTIONS: Bulb lampCROSSOVER FREQUENCIES: 3000 HzTransducers DOME TWEETER: 1.0'' neo, 0.8'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 10 W AES, 20 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 93 dB, 1W @ 1mWOOFER: 5.0'', 1.0'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 60 W AES, 120 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 87 dB, 1W @ 1mInput/Output section INPUT CONNECTORS: EuroblockOUTPUT CONNECTORS: EuroblockStandard compliance CE MARKING: YesPhysical specifications COLOR: Black - RAL 9005 HARDWARE: Wall mount bracketGRILLE: SteelCABINET/CASE MATERIAL: PlasticSize WIDTH: 187 mm / 7.36 inchesDEPTH: 167 mm / 6.57 inchesHEIGHT: 270 mm / 10.63 inchesWEIGHT: 3.8 kg / 8.38 lbs

MR 50 is a bass- reflex two-way speaker designed to deliver uncompromised audio performance and high reliability in fixed installations. Blend in with any environment and deliver deep bass, smooth midrange, and finely-detailed high-frequency response. Quality components and careful acoustic design make MR 50 the perfect speaker for listening in the most demanding applications.60W RMS power handling110 dB max SPL60 ÷ 20000 Hz frequency range110° x 100° coverage angles1 x 5" woofer (1’’ v.c.)1 x 1" neodymium dome tweeter (0.8’’ v.c.)Self-extinguishing plastic cabinetSwivel wall mount accessory includedM6 inserts available for optional U bracket4 pole EUROBLOCK connectorAcoustical specificationsFREQUENCY RESPONSE (-10DB): 60 Hz ÷ 20000 HzMAX SPL @ 1M: 110 dBHORIZONTAL COVERAGE ANGLE: 110°VERTICAL COVERAGE ANGLE: 100°DIRECTIVITY INDEX Q: 7SYSTEM SENSITIVITY: 87 dBPower section NOMINAL IMPEDANCE (OHM): 8 ohmPOWER HANDLING: 60 W RMSPEAK POWER HANDLING: 240 W PEAKRECOMMENDED AMPLIFIER: 120 WPROTECTIONS: Bulb lampCROSSOVER FREQUENCIES: 3000 HzTransducers DOME TWEETER: 1.0'' neo, 0.8'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 10 W AES, 20 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 93 dB, 1W @ 1mWOOFER: 5.0'', 1.0'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 60 W AES, 120 W PROGRAM POWERSENSITIVITY (DB, 1W @ 1M): 87 dB, 1W @ 1mInput/Output section INPUT CONNECTORS: EuroblockOUTPUT CONNECTORS: EuroblockStandard compliance CE MARKING: YesPhysical specifications COLOR: White - RAL 9003 HARDWARE: Wall mount bracketGRILLE: SteelCABINET/CASE MATERIAL: PlasticSize WIDTH: 187 mm / 7.36 inchesDEPTH: 167 mm / 6.57 inchesHEIGHT: 270 mm / 10.63 inchesWEIGHT: 3.8 kg / 8.38 lbs