The LED display consists of many light-emitting diodes placed close together. By changing the intensity of each LED, the diodes together form an image on the display.
Hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. Controllable via DMX and ArtNet. Can also be used with EZ Kling interface for KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking. Panels lock together with an easy to use quick release panel lock (one-panel lock included per panel). Rigging bars are also available for dead hang installation (m10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe).PRELIMINARY SPECIFICATIONS:• 3D LED Effect panel. Use in multiples to create a dynamic • Modular connecting system allows you to create different configurations• Quick lock rigging system allows you to assemble and disassemble quickly• 10mm thread on rear for standard Pro Clamp, truss mount• Control Protocol: DMX and ARTNET• Data Connections: Ethercon, Input, and Output• Product Size: 15.8” x 15.8” x 2.7” (400 x 400 x 68mm)• LED Quantity, per unit: 72pcs.• LED Type: 5050 SMD, 3in 1• Power Connections: Powercon, Input, and Output• Max Power Consumption: 13W• Input Voltage: 100-265VAC• Net Weight: 6 lbs. (2.74kg)• Face Material: Frosted Whtie Acrylic• Viewing Angle: 180-degrees• Working Temperature: -4 to 140 F (-20 to +60 C)• Working Lifespan: =50,000 Hours
The 3D Vision Plus is a hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. The 3D Vision Plus has a 4-Button menu system with a digital display. It may be controllable via DMX using a DMX to RJ45 adapter. It can also be used with EZ Kling interface for Artnet and KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking. Panels lock together with an easy to use quick release panel lock. Rigging bars are also available for dead hang installation (M10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe).Measuring 15.8” x 15.8” (400mm x 400mm), the face of each 3D Vision Plus panel is covered with a frosted white acrylic panel which diffuses the light from the 72 3-in-1 RGB LEDs beneath. This creates an even spread of light within each of the three sections and gives the 3D vision a wide 180-degree viewing angle.Thanks to the 3D Vision Plus’ modular design, panels can be used in isolation or linked together at any of their six sides. This means that large 3D-effect LED surfaces can be created in unlimited shapes and configurations. For example, you could use a single line of panels attached to the front of a truss pillar to spice up a stage set, while a matrix of panels could be used to create an impressive backdrop.Light Source:72 Pieces 3-in-1 RGB LEDsBeam Angle: 180 DegreesFeatures:Distinctive hexagonal-shaped LED panel is divided into three separate sections in a way that gives it a unique three-dimensional appearance.Safety hook on rear panelM10 thread on rear panel to connect a clamp to secure to a pipeWall mount slots on rear panelControl:3 Operating Modes: Sound Active Mode (with Sound Sensitivity Adjustment), Auto Run Mode (16 Programs with Speed Adjustment), DMX Control3 DMX Channel Modes: 3, 9, and 13 Channel ModeMaster/Slave Set Up4-Button Menu with Digital DisplayConnections:powerCON In/Out to daisy chain powerRJ45 In/Out DMX protocolElectrical:Input Voltage: AC 100-250V, 50/60HzDimensions/Weight:Dimensions (LxWXH): 3.16” x 15.93” x 13.80” / 80.5 x 404.7 x 350.7 mmWeight: 6 lbs./ 2.74Kgs.Approvals:ETL, ETLC, CE Accessories (sold separately): 3D Vision PL: Metal panel brackets used to lock 3D Vision Plus panels together3D Vision RB1: Metal rigging barPLC3: 3-foot powerCON power link cablesMPC10: powerCon power cordmyDMX 3.0: DMX control softwareACRJ453PFM: RJ45 to 3-pin male DMX adapter
The 3D Vision Plus is a hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. The 3D Vision Plus has a 4-Button menu system with a digital display. It may be controllable via DMX using a DMX to RJ45 adapter. It can also be used with EZ Kling interface for Artnet and KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking. Panels lock together with an easy to use quick release panel lock. Rigging bars are also available for dead hang installation (M10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe).Measuring 15.8” x 15.8” (400mm x 400mm), the face of each 3D Vision Plus panel is covered with a frosted white acrylic panel which diffuses the light from the 72 3-in-1 RGB LEDs beneath. This creates an even spread of light within each of the three sections and gives the 3D vision a wide 180-degree viewing angle.Thanks to the 3D Vision Plus’ modular design, panels can be used in isolation or linked together at any of their six sides. This means that large 3D-effect LED surfaces can be created in unlimited shapes and configurations. For example, you could use a single line of panels attached to the front of a truss pillar to spice up a stage set, while a matrix of panels could be used to create an impressive backdrop.Light Source:72 Pieces 3-in-1 RGB LEDsBeam Angle: 180 DegreesFeatures:Distinctive hexagonal-shaped LED panel is divided into three separate sections in a way that gives it a unique three-dimensional appearance.Safety hook on rear panelM10 thread on rear panel to connect a clamp to secure to a pipeWall mount slots on rear panelControl:3 Operating Modes: Sound Active Mode (with Sound Sensitivity Adjustment), Auto Run Mode (16 Programs with Speed Adjustment), DMX Control3 DMX Channel Modes: 3, 9, and 13 Channel ModeMaster/Slave Set Up4-Button Menu with Digital DisplayConnections:powerCON In/Out to daisy chain powerRJ45 In/Out DMX protocolElectrical:Input Voltage: AC 100-250V, 50/60HzDimensions/Weight:Dimensions (LxWXH): 3.16” x 15.93” x 13.80” / 80.5 x 404.7 x 350.7 mmWeight: 6 lbs./ 2.74Kgs.Approvals:ETL, ETLC, CE Accessories (sold separately): 3D Vision PL: Metal panel brackets used to lock 3D Vision Plus panels together3D Vision RB1: Metal rigging barPLC3: 3-foot powerCON power link cablesMPC10: powerCon power cordmyDMX 3.0: DMX control softwareACRJ453PFM: RJ45 to 3-pin male DMX adapter
RIGGING BAR FOR 3D VISION. MUST USE THIS RIGGING BAR WHEN HANGING 3D VISION PANELS FROM TRUSS. QUICK RELEASE PANEL LOCKS MUST BE USED TO LOCK THE PANEL TO THE RIGGING BAR
The MCTRL-300 is a controller for ADJ's AV6 LED video panels. It features one DVI signal source input and two RJ45 pixel-data outputs for 2 independant screens.The controller is easily configured via USB and it will drive up to 1.3 million pixels supporting the following resolutions: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668. The MCTRL-300 is an essential accessory for the AV6 video panels.Specifications- Control Mode: Synchronous Display with Control PC by DVI - Frame Update Frequency: 50-60Hz- Scan Mode: 1/12 Duty- Refresh Rate: 1200Hz - Support Input: Composite, S-Video, Component, VGA, DVI, HDMI, HD_SDI to DVI- Control Distance: Ethernet Cable 120m- Supported Modes: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668- Brightness Correction: Pixel, Module, Cabinet- Requires a computer (sold separately)- 2 separate RJ45 CAT6 outputs for 2 AV-6 screens (mirrored or independant content)
The new NOVASTAR VX4S™ is a professional and user friendly LED display controller and a powerful front end processor that supports multiple signal formats including DP / HDMI / VGA / DVI / CVBS / SDI, and up to 1920 x 1200p @60Hz input resolution, includes (4) RJ45 outputs for up to 2.6 million pixels of LED control, and supports Nova’s new generation point-by-point correction technology.NOVASTAR VX4S™ is compatible with the ADJ AV6, AV6X and AV3 video panels. FEATURES:User Friendly LED Display ControllerPowerful Front End ProcessorUp to 1920 x 1200 p @60Hz Input ResolutionMultiple Video Signal Format SupportNew Generation Point-By-Point Correction TechnologyCascade Multiple Units Together Via USBRack Mountable Aluminum Enclosure (screws not included)CONTROL / CONNECTIONS:(1) RJ45 LAN for IP Based Control(4) RJ45 Outputs for up to 2.6 million Pixels of LED Control(2) USB Type A and (2) USB Type B Ports (1 set on each side)(1) 1/8 inch (3.5mm) Audio InputVideo Input: (1) DP / (1) HDMI / (2) VGA / (1) DVI / (2) CVBS / (1) SDIVideo Output: (1) DVI Loop / (1) DVI / (1) VGA / (1) SDI LoopLocking IEC Power InputSIZE / WEIGHT:Length: 19.0” (483mm)Width: 10.8” (275mm)Height: 1.8” (45mm)Weight: 5.6 lbs. (2.55 kg)ELECTRICAL:AC 100-240V - 50/60Hz - 0.65AMax Power Consumption: 16W INCLUDED CABLES (1 each):DP, VGA, USB, HDMI, DVI, CAT5, Power
Touring Case for 8 x VS3IP Video PanelsSpecifications:Penn Elcom Hardware8 handles9mm Plywood4 castor dishes2 butterfly locksDimensions & Weight:Dimensions w/o wheels (L x W x H) : 1040 x 640 x 675mmDimensions with wheels (L x W x H) : 1040 x 640 x 800mm
The TRU1PCIA is a 1ft/30cm, 12AWG, IP20 rated powerCON TRUE1 to standard powerCON input power adapter. This adapter was designed for production use and for those who already own standard powerCON cables and extensions who aren't ready to invest into powerCON TRUE1 cables and extensions. The TRU1PCIA adapter can be used at your fixtures power input side while using your standard powerCON cables for all other power connections. The TRU1PCIA consists of (1) Female powerCON TRUE1 (Neutrik NAC3FX-W), (1) Blue powerCON (Neutrik NAC3MPA-1) cable mount connector and a clear heat shrinkable sleeve so each unit can labeled. The powerCON TRUE1 is a locking connector with breaking capacity (CBC), i.e. it can be connected or disconnected under live load. The standard powerCON is a connector without breaking capacity, i.e. the standard powerCON should not be connected or disconnected under load or live!Specifications1ft./30cm long end to end12AWG cableOriginal Neutrik branded connectorsIP2020A @120VAC; 16A @250VACEasy and reliable twist lock systemExtremely robust and durableUL recognized components
The TRU1PCOA is a 1ft/30cm, 12AWG, IP20 rated powerCON TRUE1 to standard powerCON output power adapter. This adapter was designed for production use and for those who already own standard powerCON cables and extensions who aren't ready to invest into powerCON TRUE1 cables and extensions. The TRU1PCOA adapter can be used at your fixtures power output side while using your standard powerCON cables for all other power connections. The TRU1PCOA consists of (1) Male powerCON TRUE1 (Neutrik NAC3MX-W), (1) White powerCON (Neutrik NAC3MPB-1) cable mount connector and a clear heat shrinkable sleeve so each unit can labeled. The powerCON TRUE1 is a locking connector with breaking capacity (CBC), i.e. it can be connected or disconnected under live load. The standard powerCON is a connector without breaking capacity, i.e. the standard powerCON should not be connected or disconnected under load or live!Specifications 1ft/30cm long end to end12AWG cableOriginal Neutrik branded connectorsIP2020A @120VAC; 16A @250VACEasy and reliable twist lock systemExtremely robust and durableUL recognized components