Light Controllers


Here you will find everything you need to control your lighting. From mixers, software, simple controllers as well as dimming and switch packs.

TOPSELLER



Topseller

New
Showtec Easy Fade 36 DMX Controller
The Easy Fade 36 is a new and user-friendly lighting console. It has been specifically designed for applications where users need to operate lights without prior knowledge of DMX and programming, such as in schools, churches, etc.The Easy Fade 36 is a double-preset console with two groups of eighteen channels each. The console can be used either as a double-preset console with eighteen channels or as a single-preset console with thirty-six channels. It features two master faders and one main master.The Easy Fade 36 does not have programming functions, making it easy for any user to operate.Specifications:Control Mode: DMX, ManualDMX Channels: 36Buttons: 20Faders: 41Power Supply: 12 V DCPower Consumption: 6 WPower Input: Low Voltage DC plugDMX Output: XLR 3PWidth (mm): 483 mmDepth (mm): 266 mmHeight (mm): 90 mmWeight: 4.3 kgRack Units: 6 UIP Protection Rating: IP20 (indoor use only)Housing: MetalColor: GrayLED Indicators: SignalMaximum Ambient Temperature: 40°CIncluded Accessories: Adapter

€185.00*

Immediately available or ready for collection
ADJ Aria X2 Transceiver
Meet the Aria X2 Transceiver. This next generation multi-band system is designed to increase the reliability and transmission range for cable free communication of a DMX signal between console and fixtures. Featuring an advanced proprietary protocol, it creates a wireless mesh that allows all Aria X2 devices within a given system to transmit the DMX signal between one another, which establishes an extremely robust network. The Aria X2 Transceiver features twin wireless antennas as well as 5-pin DMX input and thru connections. An Aria X2 network can be configured from the large display screen located on the front of the transceiver or using a dedicated mobile app. In addition, the app can also be used to remotely configure compatible fixtures and provide basic DMX control.SPECIFICATIONMain Features:• Single DMX Universe• 2.4 GHz WiFi and Bluetooth• Configuration via App or Front Panel• Wireless to DMX or DMX to WirelessSupported Protocols:• DMX (RDM is planned)• Proprietary 802.15.4• Aria X2 Mesh Protocol• Bluetooth 5.2 (BLE)• Aria X2 Serial ProtocolRF Characteristics:• Frequency range:• 2404-2480 MHz• 863-870 MHz (EU)• 902-928 MHz• Radio module: Aria X2• Interference mitigation:• CSMA• Adaptive frequency hopping (on the roadmap)• OTA updatesConnectors:• Antenna: JT SMA• DMX: 5-pin XLR Input and Output• DC: 2.5mm/5.5mm Barrel connector• Outdoor Locking Power Input and OutputPower:• AC100-240V 50/60Hz• Power Consumption: 2W• Power Fuse: T1.25A/250V. (5 x 20mm)Physical:• IP20 Aluminum / Metal enclosure• Front panel screen and rotary knob• M10 and M12 Threads• Safety Eyelet• Max ambient operating temp: 45°C• Max operating humidity:

€238.00*

delivery time 10 days
Showtec RDM Touch
The Showtec RDM Touch is the most ultimate tool for every lighting technician. With its versatile functions and user-friendly 6-button + full-colour TFT touch screen display, the RDM Touch is fully equipped to measure, test, and troubleshoot any application with DMX controlled lighting. This unit can be used for testing 3 and 5-pin cables, test midi signals, monitor and analyze signals, program sequences, send and receive DMX, and is also equipped with an RDM controller function. It is the ultimate solution to help bring peace and balance to many of life’s DMX512 challenges. The RDM Touch will be delivered including carrying case and 3 to 5-pin XLR adapters.SpecificationsBatteryBattery Type: 9 V Block PP3 not includedBattery Voltage: 9 VElectrical Specifications and ConnectionsPower Supply: 5 V DCPower Consumption: 2.5 WPower Connector In: Micro USBDMX Connector: XLR 5P In/OutDMX Connector In: XLR 5PDMX Connector Out: XLR 5PData Connector In: RJ45MIDI Connector: YesMechanical SpecificationsLength (mm): 67 mmWidth (mm): 44 mmHeight (mm): 113 mmWeight: 0.4 kgIP Rating: IP20 (indoor use only)Housing: Metal, PlasticColour: BlackLED Indicators: SignalIncluded ItemsIncluded Accessories: Bag, XLR 5P male to XLR 3P female adapter, XLR 5P female to XLR 3P male adapterControl and ProgrammingControl Mode: ManualProtocols: Art-Net, DMX, RDM, sACNDisplay: LCD, Touch

€467.00*

Delivery time from 8 to 10 weeks!
Tip
Wolfmix W1 MK2 DMX Controller
The Wolfmix W1 MK2 is the latest controller from Wolfmix and comes with some exciting new features. It has been specifically designed to create real-time light shows without the need for a computer. The W1 MK2 is targeted at the disco, club, and live performance market and is designed with cues from DJ and electronic music hardware.The latest features in the MK2:New Encoder Knobs: The new, larger encoder knobs provide more precise control over the settings and effects of your lighting system.USB-A Port: The addition of a USB-A port allows you to directly connect a USB memory stick or MIDI controller to the controller. This enhances the flexibility of controlling your light show, and you can import shows directly from a USB stick.The Wolfmix W1 MK2 still offers an impressive toolbox of FX modules, music synchronization, and the ability to control up to 4 DMX universes, equivalent to 2048 channels. You can control lighting for up to 680 fixtures and beams, configure different device types and properties, and utilize many other features to customize your light show.Setup:Standalone operation (no computer required)Compatible with any DMX deviceControl up to 4 DMX universes (2048 channels, add-on required for U3+4)Control up to 680 fixtures & beamsConfigure up to 50 device typesSet up to 5000 device properties (color, gobo, etc.)Use 8 device groupsSupport 6 projectsManage 15000+ available fixtures (3500+ on the controller)Customize DMX addresses, device order, and group settingsUse as a DMX splitter with DMX universe mapping (requires an add-on)Palettes & FX:Color FX module with 8 effect types and 16 customizable colorsMove FX module with 8 effect typesBeam FX module with 8 effect types6 flash buttons for controlling special FX, strobe, blinder, speed, blackout, and smokeStatic color palette with 10 custom colors per group and gradient controlStatic position palette with 5 custom positions per group with fade and fanningGobo palette with 5 customizable gobos per group20 customizable live-edit buttons with flash trigger mode and 'park' function100 customizable presets for saving snapshots with hold and fade timingsPreset playback cue list - all presets or per page of 20 presetsControl & Synchronization:Group and master dimming with encoder accelerationGroup flash, full, and blackout16-bit pan/tilt controlMulti-beam LED bar controlMusic pulse synchronization of FX modules via microphone or line-inBPM synchronization of FX modules with Ableton Link, OS2L, or BPM TAPAdjustment of effect speed, phase, order, size, fade, fan, and flickLive control of move-FX registration pointGlobal FX speed and freeze controlDMX IN mapping with group dimmer and patch to output channels (requires an add-on)WLINK - Synchronization with another Wolfmix controller (requires an add-on)Built-in Tools:Fixture BuilderFixture calibration tool for limiting the range of moving fixturesX-Y touch-controlled positioning gridRGBW touch-controlled color pickerReal-time sequencer with 8 steps for creating beam and move-FXLive view of DMX levels with override of default values and DMX channel testingBeam editor for adjusting the minimum and maximum values for generated effectsOther Nice Features:Calibration and mixing of RGB, white, amber, and UV colors with automatic translation of the fixed color wheelAutomatic matching of similar gobos across different fixture typesTime-triggered activation of flash and preset buttonsFixture FLIP function for reversing the beam orderFixture SPLIT function for splitting multi-FX barsLock the entire controller or lock editing with a passwordProject and fixture backup with the WTOOLS appOffline 3D visualization with Easy View and WTOOLS via USB (requires an add-on)Automatic recovery of the active project (no manual saving required)Import various fixture setups into the same projectStarts up in less than 2 seconds and begins sending DMX in less than 1 secondFactory firmware recovery modePlease note that some of the above-mentioned features require additional purchases available through the WTOOLS app. The Wolfmix W1 MK2 is housed in an ABS plastic case and features a 4.3-inch color TFT screen with tinted glass and capacitive touch screen. It is powered by a 220MHz CPU with an ARM core and has 8MB of RAM and 16MB of flash storage. With its various connectors and powerful capabilities, it provides a comprehensive solution for controlling lighting setups.

€835.00*

Immediately available or ready for collection
Tip
Daslight DVC Gold, Daslight 4 and Daslight 5
Daslight software is free to download, but requires a Daslight USB or Ethernet interface to convert the data from the software to DMX so that the fixtures can process it. Each DVC interface also has stand-alone memory that allows your show to be copied to the device and run without a computer - making it a great choice for a live backup or a smaller show.Contact terminalsThe control of scenes is possible both in live and in stand-alone mode using the contact connections on the interface. Bridge the grounding pin with pins 1-8 of the HE10 connector and start a scene using a button or relay. The 8 ports can be combined in binary for up to 255 triggers.Ethernet connectivityConnect the GOLD to your network and control Daslight over longer distances. The network connection also allows the device to be controlled in stand-alone mode with our simple remote app for iPhone / iPad / Android.StandaloneEach Daslight interface comes with either Flash or microSD memory. This enables programmed shows to run in standalone mode even without a computer. Standalone is perfect for small shows where a computer is not needed or as a backup as well as for permanent building installations. The scenes can be changed using the + and - button on the interface, via the contact connections or via the network using the Easy Remote iPhone / iPad / Android app (DVC4 GZM).Features:1024 DMX OUT channels (2 universes), expandable to 2048 channels and other software that supports SUT technology (see dmxsoft.com)Independent SD card storageWorks with Daslight 4 and the next generation of Daslight 5 softwareUSB-C and Ethernet connectionComes with a USB-C cableCompatible with Windows 10 & 11 32/64-bit and macOS 10.14 or higherTechnical specifications:USB: type CXLR: 4 x 3-pinEthernet: RJ45Housing: plasticButtons: 13Memory: SD cardLive channels by default (XLR): 1024Live Channels max (XLR): 2048Live Art-Net universes: optionalLive Art-Net universes max .: 30DMX IN mode: YesDaslight 4: FullDaslight 5: FullSA channels by default: 512SA channels max .: 2048SD card memory: YesZones: 5Scenes in total: 99App / Api trigerring: YesDate & Time: optionalStand alone, buiding with: Daslight 4/5

€435.00*

Immediately available or ready for collection
powersupply for TFExtSDJ1 MediaOperator MicroPhase 6VDC1,75A

€10.00*

Immediately available or ready for collection
DXT DMX Art-Net Node 8 MKII
Art-Net interface for output of 8 universes on XLRParallel DMX input possible (1024 channels)8 optically isolated XLR plugs (3-pin) for DMX output2 XLR jacks (3-pin) for DMX inputVariable data routing capabilities for all DMX outputs2 x Ethernet portSerial connection possibleUser-friendly configuration directly at the front panel via 4 operating buttons and alphanumeric LCD screen (2 x 16 characters)LED indication for functionsSplitter operation possibleCan transmit up to 4096 DMX channelsControlling by ArtNetThe device can be connected via RJ-45 (F) mounting version to the PC(19") 48.3 cm rack installationPackage contents:1 x Device, 1 x User manual, 1 x Power cord

€465.00*

delivery time 14 days
PCB LL08-1A2 for DX-626A
Lite Puter

€42.50*

Immediately available or ready for collection
DMX IC for Lite Puter DX-626 (ILS 81487)
DMX IC for Lite Puter DX-626

€10.00*

Immediately available or ready for collection
Lite Puter DX-1005 LED Edge Dimmer 5A
The Lite Puter DX-1005 DMX dimmer is an excellent choice for high-precision dimming solutions. Equipped with a powerful CPU microprocessor, it offers an impressive dimming resolution of 16384 levels. This high resolution ensures extremely stable dimming behavior, even at extremely low brightness levels of just 1%. This ensures reliable dimming without flickering or unwanted effects. The Lite Puter DX-1005 DMX dimmer is therefore the ideal choice for demanding applications where precise lighting control is required.Features1% lowest brightness calibration for LED lampsActive anti-flicker circuit16,384 steps dimming curveBuilt-in bypass switchDMX-512/RS-485SpecificationsAC Input: AC 100 – 240VDimmingOutput: Leading-edge output, up to 5AProtocol: DMX-512/RS-485

€149.00*

Immediately available or ready for collection
Display for EDX-F04R
Display for EDX-F04R

€118.75*

Immediately available or ready for collection
DXT DMX Art-Net Node IV
The DXT DMX Art-Net Node IV is part of Eurolite's DXT series, which consists of high-performance and reliable DMX tools made in Germany. The Node IV features four channels that can output up to 512 DMX channels each or control up to 2048 channels. It provides four Neutrik XLR and two etherCON connectors. The second etherCON connector enables daisy-chaining of the network connection with multiple devices. The device can be configured with an integrated OLED display, via Art-Net or with a website.Art-Net interface for output of 2048 DMX channels4 x 3-pin DMX output2 etherCON network connectionsUp to 2048 DMX channel outputOLED display with rotary encoderLink and activity LED for each network portSupported by all applications with Art-Net outputArtDMX reception via Broadcast or UnicastConfiguration with OLED display, website or Art-NetAvailable settings: IP address / Subnet mask / Art-Net ShortName / Art-Net LongName / Art-Net Net / Art-Net Subnet / Art-Net UniverseDMX refresh rate: 40 Hz or 20 HzOperation via included power adapterRack or truss installation via optional accessoriesCan transmit up to 2048 DMX channelsControlling by ArtNetBuilt with NEUTRIK connectorThe device can be connected via RJ-45 (F) mounting version to the PCDesktop console housing 1 U; (19") 48.3 cm rack installation (optional)Made in GermanyTECHNICAL SPECIFICATIONSPower supply: 100-240 V AC, 50/60 Hz12 V DC 1 APower consumption: 3 WIP classification: IP20Power connection: Mains input 4-pin screw plug connector (M) mounting version power supply cord with AC adapterDMX channels: Output 2048DMX output: 4 x 3-pin XLR (F) mounting versionNetwork connection: Protocol: Ethernet TCP/IP via 2x RJ-45 etherCON (F) mounting version, 10/100 Mbit/sStandard: IEEE 802.3uControl: ArtNetDisplay type: OLED displayControl elements: EncoderStatus LED: Signal, linkUse of brands: Built with NEUTRIK connectorColor: BlackPC connect: Via RJ-45 (F) mounting versionHousing design: Desktop console housing 1 U(19") 48.3 cm rack installation (optional)Dimensions: Width: 20 cmDepth: 9,8 cmHeight: 4,1 cmWeight: 850 g

€327.50*

delivery time 14 days
Battery for Botex T-4 Bar /DC-4 / Light Operator
Battery 3,6V 60 mAh

€3.75*

Immediately available or ready for collection
Display for DPX-620 II

€41.25*

Immediately available or ready for collection
PCB Control Switch for Strobe with DMX color changer 1500 W Botex

€87.50*

Immediately available or ready for collection
DMX PC Board for DDP-405 Kit DP-DMX20L-A Rev.2.1

€42.50*

Immediately available or ready for collection
Transformer for T-4 Bar Botex
Also for American Audio (American DJ), and Showtec T-4 bar

€13.75*

Immediately available or ready for collection
Ein/Aus Schalter für Botex Scene Setter od. GLP Lightoperator,

€1.25*

Immediately available or ready for collection
Transformer for Botex DC-4
Auch für Showtec und JB DC-4 Dimmer und DC-Steuerung

€16.25*

Immediately available or ready for collection
Daslight DPAD 512 white
The DPAD 512 is one of our most exciting developments within the architectural market. The controller comes pre loaded with RGB effects and can be programmed with the DVC 3 software. with power suppyThe unit features:-DMX512 Stand Alone Controller with a glass face-4 touch sensitive buttons for simplicity and reliability-dynamic scenes created step by step with adjustable timing-live setting of the intensity and color of a scene-programmable with the included USB cable and control software-5 pin connector block at the rear : 3xDMX 2xpower-works with 5-12V AC/DC adapter incl.-512 DMX channels-dimensions: 86x110mm, only 10mm thick

€392.50*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails