MS101-4 is the standard model in Yamaha's range of desktop utility powered monitors, the MS101-4 offers portability in a compact design and simple but comprehensive functions for outstanding usability.30W of amplifier power provides clean, high output soundRedesigned enclosure for an even lower profileCombo Input jack accepts both XLR and 1/4" connectorsDirectly mountable on Euro microphone stands (Optional - not included - mic stand adaptor BMS-10A is available for adjusting tilt angle)Technical specifications:
Speaker type: full-range speaker, bass reflex type
Frequency Response (-10dB): 77Hz-20kHz
Maximum output level (1 m; on axis): 115 dB SPL
Power Consumption: 1/8 Power Consumption: 10W, Idle Power Consumption: 3W
Power requirement: 100 V - 240 V, 50/60 Hz
30 W of amplifier power ensure a clean, powerful sound
Redesigned housing for an even slimmer profile
Combo input jack for XLR and 1/4" connectors
Can be mounted directly on Euro microphone stands
Dimensions (W x H x D) 142 x 196 x 187 mm
Net Weight: 2.1kg
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsColor: WhiteDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter38Hz - 30kHz frequency response75W LF plus 45W HF bi-amp system for high-performance 120W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsColor: whiteDimensions (WxDxH): 250 x 390 x 334 mmWeight: 10.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter38Hz - 30kHz frequency response75W LF plus 45W HF bi-amp system for high-performance 120W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 250 x 390 x 334 mmWeight: 10.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
Equipment: 5 "woofer and 1.9" U-ART ribbon tweeter2x Class-D amplifier: 50W RMS woofer, 20W RMS tweeterFrequency range: 45 - 25000 HzCrossover frequency: 3 kHzMaximum level: 106 dB (1m / pair)Back bass reflex openingConnections: line input XLR and RCADimensions (W x H x D): 179 x 298 x 297 mmWeight: 5,7 kg
Equipment: 7 "woofer and 1.9" U-ART ribbon tweeter2x Class-D amplifier: 50W RMS woofer, 20W RMS tweeterFrequency range: 39 - 25000 HzCrossover frequency: 2.6 kHzMaximum level: 110 dB (1m / pair)Back bass reflex openingConnections: line input XLR and RCADimensions (W x H x D): 210 x 347 x 293 mmWeight: 7.1 kg
Matched pair - limited special modelcoordinated monitors for increased precision of playbackEquipped with: 6.5 "woofer (60 W) and 1" tweeter (35 W)Power: 95 W (bi-amp)Bass reflex systemFrequency range: 43 - 30,000 Hzbalanced input via XLR and 6.3 mm jackAdjustable input levelRoom control and high-trim tone controlDimensions per monitor (W x H x D): 210 x 332 x 284 mmWeight per monitor: 8.2 kgDelivery quantity: 1 pair
Matched Pair - Limited ModelSpecially-matched parts help to optimise the acoustic performanceTwo-way bass-reflex bi-amplified nearfield monitorsIdeal for music production, mixing and masteringRoom control and high trim control for room optimisation2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz22Hz - 150Hz frequency responseHigh-power 150W amplifier exclusively designed for low frequenciesLOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipmentXLR and TRS phone for outputs and XLR for L and R and EXT SUBDimensions (WxDxH): 300 x 350 x 389 mmWeight: 12.5 kg
Adam Audio T10S10 "subwoofer in a compact, robust designFrequency response: 32 Hz - 120 HzLow Pass Filter130 Watt Class-D amplifiermatched to Adam T5V and T7VIntegration into other systems possible2 balanced XLR inputs and outputs2 RCA inputs and outputsDimensions (W x H x D): 318 x 390 x 413 mmWeight: 12.2 kg
The Genelec 8020D is a professional compact near field monitor. It delivers an analytical sound image without discoloration for fatigue-free listening and objective mixing. With its small dimensions, it is suitable for small studios, post production, broadcast and mobile applications. Protective grids in front of the drivers simplify transport. The housing of the Genelec 8020D is made of aluminum. The loudspeaker is therefore stable and low in resonance. Rounded housing edges and the optimized sound guidance ensure balanced radiation, very good spatial imaging and a wide listening area. The stereo image is precise and stable. Despite the small size, there is a long bass reflex channel. It enables precise and deep bass reproduction. With the matching 7040 subwoofer, the frequency range can be extended to 30 Hz.The loudspeaker can be adapted to the location and room acoustics using switchable filters. The IsoPod stand decouples the monitor from the surface and enables it to be aligned with the listening position. Threaded holes and suitable accessories facilitate wall or ceiling mounting.Analytical, high-resolution sound image for reliable decisions when mixing and listening.The die-cast aluminum housing is robust and low-resonance.The rounded edges of the case prevent the sound from being discolored.The optimized sound guidance enables balanced radiation and a wide listening zone.Switchable filters to adapt the loudspeaker to the installation location and the room acoustics.Sources such as audio interfaces, laptops, iPods or televisions can be connected directly.Developed and manufactured in Finland.Transmission range: 56 Hz - 25 kHz (-6 dB)Linear frequency response: ± 2.5 dB (62 Hz - 20 kHz)Sound pressure: 100 dBLoudspeaker: 105 mm woofer, 19 mm metal dome tweeterPower amp output: 2x 50 watts (Class-D)Dimensions: 230 x 151 x 142 mm (HxWxD), height with Iso-Pod 242 mmWeight: 3.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
Fluid Audio F4 Studiomonitors (1 pair)Are the ideal loudspeakers for small listening environments in the entry area , but also as alternative monitors they offer at best . The bass reflex port is on the back , which is why the F4 should always be placed with some distance to the wall. On the other hand, the F4 is the only model in its price class with external heat sink on the back. The F4 developes within the housing only moderate temperatures, so the amplifier does not get any thermal problems at loud listening and can work relaxed. The low-noise class AB amplifier in the left box supplies both speaker chassis with the necessary power . Moreover, it turns the power consumption to standby mode automatically if there is no input signal more than 10 minutes.MDF cabinetInputs: jack , RCAFront panel volume control10 cm (4 ") woofer of highly compressed paper membrane2.5 cm (1 ") tweeter with silk domeFront panel auxiliary inputFront panel headphone outputOutput current limiterOverheating, transient and subsonic protection circuit LED power indicatorSpecifications:Color: BlackPower (RMS / max . ) : 30/ 60 WFrequency range: 69-22000 HzSound pressure level: 97 dBDimensions: (W x H x D) 150 x 222 x 175 mmWeight: 6.5 kg
Elevate 5 MKII Active desktop studio speakersSpeaker Type: 2-way desktop multimedia speaker systemTweeter: 1 "(2.5 cm), silk domeWoofer: 5 "(127 mm)Amplifier: 2 x 40 watt sine (120 watt peak)Class A / B D power ampFrequency range: 56 - 20,000 HzInputs: 2 x unbalanced RCA inputs, 2 x balanced 1/4 "TRS inputsOutputs: 3.5 mm stereo jack output (headphone)Housing: Vinyl-coated MDFPower supply: 110 - 240 VAC 50/60 Hz (auto-switching)Dimensions: 270 x 225 x 185 mm (per speaker)Weight: 6.2 kg (total weight)Scope of delivery:2 Elevate 5 MKII speakersAudio cableconnection cablepower cableQuick Start GuideSafety and Warranty Information
The A8H features an 8-inch multi-layer mineral fiber (MLM) woofer, an innovative mid-range driver, and ADAM Audio's hand-crafted X-ART tweeter. Like all models in the A series, the A8H offers innovative features for individual adjustment to personal listening habits and the acoustic environment: This is ensured by a rotatable HPS waveguide and the integrated DSP technology.This studio monitor is suitable for all conceivable monitoring situations in medium-sized and larger rooms. It is the perfect choice when the highest possible fidelity is required.The A8H is available in left and right versions.Handcrafted X-ART tweeter with rotatable HPS waveguide8'' woofer (multi-layer mineral)3.5" DCH midrange driverTotal amplifier power peak: 340 WADAM Audio - A8H-L SideTweeter: Rotatable X-ART tweeter + HPS WaveguideMidrange: 3.5” MLM midrangeMidrange voice coil Ø: 33 mm / 1.3"Woofer: 1 x 8" MLM mid-wooferWoofer voice coil Ø: 38 mm / 1.5"AD converter: 24-bitInternal sample rate: 96 kHzAmplifier power RMS: 250 W (woofer) + 70 W (midrange) + 20 W (tweeter)Crossover frequencies: 400 Hz, 3 kHzPower consumption: 500 W maxAnalog balanced input: 1 x XLRAnalog unbalanced input: 1 x RCASingle hardware unit (net): 13.6 kg / 30 lbs ozDevice in single carton: 16.6 kg / 36 lbs 10 ozDimensions (height x width x depth): 274mm x 382mm x 329mmPacking Size: 405mm x 510mm x 455mmAC input voltage: 100 - 240V, 50/60 Hz
High-quality compact studio monitors for uncompromising creatives.2-way bass reflex active speakers with 4.5" cone woofer and 1" dome tweeter60 Hz - 22 kHz frequency response (-10 dB)26 W + 26 W output power (dynamic, RL=6 ohms)Sound customization options with ROOM CONTROL and HIGH TRIMXLR/TRS jack (COMBO), RCA, and stereo mini inputsStereo mini RCA cable, speaker cable, and anti-slip pads includedPackage unit: PairDimensions (W x H x D): 150 x 240 x 213 mm (for the left monitor) / 150 x 240 x 203 mm (for the right monitor)Weight: 3.7 kg (for the left monitor) / 3.1 kg (for the right monitor)Color: Black
Fluid Audio FPX7Active studio monitor7" composite cone, low-frequency driverAir motion transformer (ribbon) tweeter provides an extremely fast and accurate responseBi-amplified 140Watt Class A/B amplification (90w woofer/50w AMT tweeter)Acoustic Space Control lets you calibrate the FPX7 to your mixing environment ( 0, -2, -4db )Tweeter high frequency trim control ( +2, 0, -2db )Fader Volume control on front baffle for easy accessFront loaded slot port for directional bass responseAmplifier standby function to conserve energyFrequency response: 42 Hz - 27 kHzCrossover frequency: 3.5 kHzAmplifier power: 140 watts RMSSignal-to-noise: > 100 dB (typical A-weighted)Polarity: Positive signal at + input produces outward LF one displacementInput impedance: 20 k ohms balanced, 10 k ohms unbalanced Input sensitivity: 85 mV pink noise input produces 95dBA output SPL @ one meter with volume control at maximumProtection: RF interference, output current limitingover temperatureturn-on/off transient and subsonic filterCabinet: Vinyl-laminated MDFSize (single monitor): 256 x 174 x 193 mm (HxWxD)Weight (single monitor): 7.5kg
TIME-TESTED TECHNOLOGYAlesis has been creating studio monitors for nearly a quarter century. In that time, we’ve learned a thing or two about optimizing sound and sonic clarity. Built using technology adopted from Alesis' award-winning Monitor One and M1 Active professional studio monitors, the M1 Active 330 USB Desktop Studio Monitors are the perfect way to upgrade your computer or mobile device experience. Each speaker is housed in a custom-designed anti-resonant wood cabinet that helps provide natural bass. It features an elliptical waveguide with directional articulation technology.EXCLUSIVE ALUMINUM WOOFERSThe M1 Active 330 USB studio monitors are equipped with 3” aluminum woofers that are lighter and stiffer than typical carbon-fiber, paper or glass-Aramid woofers, giving the M1 Active 330 USB an even faster transient attack and more linear response through the bass and midrange. Additionally, a precision-designed waveguide provides high-frequency dispersion in a well-controlled, predictable pattern. This ensures a widened listening “sweet spot” while at the same time preventing random scattering of the sound. The smoothly radiused “aerodynamic” cabinet edge prevents objectionably-audible artifacts from edge diffraction and the flared rear-firing bass ports eliminate distracting port turbulence from the speaker’s bass output.ALL THE CONNNECTIONS YOU NEEDThe Alesis M1 Active 330 USB speakers are not only substantial audio monitors, but also serve as a convenient audio interface. The M1 Active 330 USB speakers enable you to play audio from your computer, as well as record audio coming into the speaker to your computer. Line-level turntables, keyboards, guitar effects, DJ mixers, or standard CD and tape players can all easily connect directly to the M1 Active 330 USB speakers. Simply plug in the USB cable to your computer – No special drivers required.FEATURESPerfect for home studios, video editing, gaming and mobile devicesIntegrated 16-bit (48kHz) USB audio interface for easy recordingSeparate high- and low-frequency drivers with crossover3-inch aluminum low-frequency driver in ported enclosure delivers rich, tight bass1-inch silk dome tweeter provides smooth, clear highs10W per channel output power; 20W totalHigh-density wood cabinets suppress unwanted resonancesElliptical tweeter waveguide optimizes dispersion and stereo imagingCarefully formed baffle radiuses reduce edge diffractionCONTENTSM1Active 330 USB monitors (Stereo Pair)USB Cable1/8" (3.5mm) TS CablePower CableUser GuideSafety & Warranty Manual
ACTIVE DJ MONITOR SPEAKERS FOR HOME STUDIOReloop's active DJ monitor speakers "ADM-5" are the perfect addition to every DJ home studio. Whether in digital-mixing surroundings with a DVS or DJ controller or as compact speaker for the DJ setup at home - the ADM-5 are constructed in a space saving way and deliver a powerful sound.RESPECTABLE SOUND SPECTRUMWith a frequency response of 35 Hz - 20 kHz a respectable sound spectrum is reproduced and each bass and high peak is reflected accurately. Full 30 watt power generate a powerful sound, facilitating a sufficient sound emission for any private mix session.HIGH-QUALITY COMPONENTSAs opposed to many monitor speakers made of plastic, the resonance body of the ADM-5 are made of high-quality wood, thus making them substantially balanced - of course it is possible to adjust the low and high frequencies via separate controllers. Due to the magnetically shielded bass drivers it is also possible to place the speakers near computers or monitors. Moreover the convenient RCA input allows an effortless connection to a DJ soundcard or the Digital Jockey. The Jockey speaker!FEATURESProfessional 2-way active DJ monitorsOutput: 2x 30 W RMSFrequency response: 35 Hz - 20 kHzS/N Ratio: > 75 dBImpedance: 8 ohmsMagnetically shielded bass driversSpeakers: 13.34 cm (5.25'') woofer, 2.54 cm (1'') tweeterTECHNICAL DATASpeakers: 13.34 cm (5.25'') woofer, 2.54 cm (1'') tweeterDimensions: 232 x 320 x 180 mmWeight: 5 kg (per piece)
€155.00*
Immediately available or ready for collection
This website uses cookies to ensure the best experience possible. More information...