LED technology and LED lighting include all installation lighting in restaurants, bars or at home as well as LED strips for indirect or direct lighting, for example. in the kitchen or at the bar or LED panels; With their inconspicuous modern design, these ensure a beautiful, wide, smooth light in the room.
SMD LED Panel Pendant lamp Wall lamp Ceiling lamp 60W 120x30 120 °advantages:-extremely flat: only 12 mm-does not get hot-no additional cooling required -homogeneous light distribution -Innovative design with filigree aluminum frame Efficiency: up to 90% energy saving Longevity: life of up to 50,000 hours-no flickering and no warm-up time, lights up immediately when switched on-no harmful substances such as mercury -No electric wave, no interference -No UV or IR radiation Environmentally friendly: besides the sunlight we have the most environmentally friendly light sourceBrand BluelightDegree of protection IP20Height 12 mmLength 120 cmWidth 30 cmStyle ModernColor cool WhiteDelivery SMD LED panel light wall ceiling light 60W 120x30 120 °24 Volt0-100% dimmable flickerApplication For use in enclosed spacesProduct Features LED pendant light, Power: 60 Watt / 5500 lumens, beam angle: 120 °, homogeneous light distributionScreen Material Stainless SteelLamp DetailsPower consumption 60 watts
Switching power supply in a closed design with guard screw. Direct mounting on the DIN rail.Universal input voltage with wide rangeOverload protection by current limit, shutdown after 3 secondsShort circuit, overload, overvoltage protectionBuilt-in PFC circuitLED indicator for power onDC OK relay contactpeak loadOutput voltage 24 VDC Current 20A Performance 480 W Inrush 80 A Input voltage 90 - 264 VAC Input voltage 127 - 370 VDC Ripple & Noise 100 mV Efficiency 94 % Length 125,2 mm Width 85 mm Height 128,5 mm Short circuit protectedOverload protectionSurge protection
Switching power supply for LED 24V/4,5A Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 4,5 AOutput power 100 W, working voltage adjustable approx. 21,6 - 26,4VInput voltage 88 - 264 VACFrequency 47-63 Hz, 1,5A / 230 VACConnection: terminal screwSize: 199 x 98 x 38 mm
Switching power supply in a closed design with guard screw. Direct mounting on the DIN rail.Universal input voltage with wide rangeOverload protection by current limit, shutdown after 3 secondsShort circuit, overload, overvoltage protectionBuilt-in PFC circuitLED indicator for power onDC OK relay contactpeak loadOutput voltage 24 VDC Current 10A Performance 240 W Inrush 65 A Input voltage 88 - 264 VAC Input voltage 124 - 370 VDC Ripple & Noise 100 mV Efficiency 94 % Length 125,2 mm Width 63 mm Height 113,5 mm Short circuit protectedOverload protectionSurge protection
LED Power supply 12V 50W 4.2AUniversal AC input: 88-264V ACShort circuit, Over-load, Over-voltage protectionsFree air convection coolingLED indicator for Power-ON100% full load burn-in testAl using 105°C Long life electrolytic capacitorsHigh operating temperature up to 70°CWithstand 5G vibration testHigh efficiency, long life and high reliabilitySafety standards: UL60950-1, TÜV EN60950-1 approvedConnections: Terminal block for input and output
The LED controller has the latest digital processors that an absolutely homogeneous, linear control of the LED constant voltage lights (LED stripes, etc.) allows. High-performance and technically the controller is currently the benchmark and certainly belong to the benchmark of modern LED lighting control.The controller is a 4 channel (RGBW) DMX / PWM controller which converts a digital DMX512 signal into corresponding 12V-24V low voltage power for the operation of LED strips common anode. In addition, the controller has 7 internal stand-alone programs, the choice of 3 dimming curves and an operation with 16-bit resolution.All functions are displayed on the large OLED display and can be operated using the three function buttons. The controller runs in the voltage range between DC5V- DC24V and has a capacity of 4x5A per channel (max. 20A / Controller). It is supplied in a stable, high-quality plastic housing. The connections are made via screw terminals.Technical specifications:4-channel DMX / PWM LED Controller16-bit or 8-bit mode selectable OLED display for function control7 internal stand-alone programs3 dimming curves adjustable (linear / Gamma / 1-gamma)0-100% dimming LEDindividual control of each channel DMX signalDC5V-DC24V / 5A per channel (max. Total 20A)255 brightness steps per channelAcoustic SignallingInput and output via screwstable plastic housingOverload and short circuit protectionDimensions: 175x44x30 mm (LxWxH)Weight: 0.35 Kg
Designed with 5 channels output, and Max. 6A current per channel, up to 720W output powerEasy operation with LED screen and the touch buttons.Support 3 kinds of DMX ports : 3-pin XLR, RJ45, green terminal.With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting,equipment recognition, etc.With short circuit protection and over current protection, as well as warning function when fault.With fast self-testing function.High/low PWM frequency for optional.LOW 500 Hz / High 4000 Hz16bit (65536 levels) / 8bit (256 levels) grey level optional.Technical Specs:Input signal DMX512/RDMInput voltage DC12V~DC24VMax load current 6A x 5CH Max. 30AMax output power (0~72W...144W) x5CH Max. 720WDMX512 socket 3-pin XLR, RJ45, green terminalGray scale level 8bit(256 levels)/16bit(65536 levels)Working temperature -30°C~65°CDimension L169×W80×H39mmPackage Size L182×W91×H41mmWeight (G.W) 550g
120 super bright SMD LEDs 5050 coldwhite / warmwhite excellent quality used with 120 ° viewing angle per meter of the LED strip. Here, the LED Strip can be separated every 5 cm. The LED stripe is provided with a self-adhesive strip (3M 300 adhesive tape) on the back.LED Stripes can be used without difficulty by the very comfortable size at almost any location, such as the LED illumination of kitchens, bathrooms, in the living room but also in restaurants and many more places that are flexible depending on the purpose and situation to your color requirements should be adjusted.Our LED strips are supplied with a 15cm long cable.The connection is made directly to 24V or appropriate control systems.Technical specifications:cool white and warmwhite 2in1 LED StripeSMD Stripe with 600 bright 3528SMD LEDsadhesive backingshortened always 5cmLength: 500 cm / - only 2.2mm highWidth: 10mmvery flexiblecommon plusPower: 19.2 W / m24V (20-28V workspace)Color temperature: 2500-6000KCRI >= 90Luminous flux: 1400 lumens per meterProtection class: IP20 non waterproof versionCertificates: UL, CUL, CE, RoHS
96 super bright SMD LEDs 5050 RGB excellent quality used with 120 ° viewing angle per meter of the LED strip.LED Stripes can be used without difficulty by the very comfortable size at almost any location, such as the LED illumination of kitchens, living rooms and many more that can be flexibly adjusted depending on the purpose and situation to your color requirements.Our RGB strips are supplied with a 15cm long cable.The connection is made directly to 24V or appropriate control systemsTechnical specifications:RGB Color Changing LED StripeSMD Stripe with 480 bright 5050SMD LEDscan be controlled by RGB ControllerLength: 500 cm / - only 11.0mm highWidth: 10mmvery flexiblecommon plusPower: 20W / mDC24V version: can work with DC20V to DC28V InputLuminous flux:red 130 lmgreen 450lmblue 100lmProtection: IP67 silicontubeCertificates: UL, CUL, CE, RoHS
LDX-1201 12 CH LED Dimmer PackDip switch for DMX start channel address setting.Connectable to IR remote. (optional)Specifications:Power Input: DC 12-28VProtocol: DMX-512Capacity: 12CH, 1A per channel, total: 12ASigal Connector: 3 PIN green terminalDimension: 225(W) x 72(H) x 44(D)mmWeight: 420 g
The new DX LED Controller unite finally all the features that guarantee multifunctional operation and easy installation of a LED screen controller.The DX LED controller is available in three versions, a 1-channel dimming controller (DX-5), as a 2-channel version for WW / CW applications (DX-7) and the 4-channel version for RGBW applications (DX -8th). All models in the DX series, while enjoying the 4 zones (spaces) which can be controlled separately. The DX series is both a DMX signal to digital cabling to the recipients, as well as RF radio signals (2.4GHz) for wireless connection to the recipients from. Another highlight, the DX controller can be directly connected to the 230V mains, it eliminates the hassle of wiring a 12V line toward the wall controller. The DX series is the ideal solution for post-to-install LED controllers. Simply the wall controller in the existing flush box set and connect it to the 230V household power, place the wireless receiver near the LED lights, finished. The elegant design with the touch-sensitive glass surface make the DX controller in addition to the real eye-catcher in any room.Technical specifications:4 zones à. 2 channels (CW / WW)each is individually adjustable zoneeach is individually dimmable ZoneOutput: DMX + radio (RF / 2.4GHz)LED Wall Controller Controller with the latest digital technologyDimming with 4096 steps (!)Noble glass surface with touch-sensitive keys and wheelColor (color temperature / CT) can be storedT-PWM technology causes an almost perfect dimmingmultiple controllers can be operated in parallelLED status indicator (on / off) + acoustic signalvery high quality workmanship and an elegant designPower Supply: AC 230V ~Dimensions: 86 x 86 x 36 mmColor whiteWeight: 225gsuitable for 86mm wall outlets
The new remote controls the V-Series includes 3 different keyfobs. The 1-channel version V5 (Dimmer) The 2-channel V6 (CCT mixture) and with the V8 for the control of 4 channels (RGBW). The models V5, V6 and V8 are designed as multi-zone remotes and up to 4 receivers individually controlled.All remote controls are suitable for Fifi controller 8LED-001 630 and can be operated in parallel with this at the receivers 8led-001 550 LED dimmer and 8led-001 551 LED dimmer. The connection to the LED dimmers is via radio in the broadcast-safe frequency range of 2.4GHz.The Wifi Controller can be called absolutely multifunctional and unique. An LED control which both via WiFi (8LED-001 630), by hand remote control (V-series) and also via the wall controller (DX Series) can be controlled and also operates a very large area with up to 12 individual zones / areas, there is no second times in the market.Specifications V8 LED Controller 4 channel (RGBW) / 4 zones4-channel RGBW LED controller 8LED-00155x receiver4 zones (8LED-00155x receiver) controlled individuallyMaster ON / OFFEach zone either switchable or dimmableInfinitely variable brightness and color settings for each zoneIndicator LED indicates operational statusseparate "W" (White) schemeA V8 can control an infinite number of 8led-00155x receiverA V8 can control up to 4-8LED 00155x receiver individuallySeveral V8 can control a 8led-00155x receiverParallel operation with DX wall controllers possibleParallel operation with 8LED-001 630 possibleRange: approx 30mFrequency range: 2.4GHzBeautiful and timeless cabinetincl. wall mountDimensions: 145 x 40 x 12 mmWeight: 80g
The new EX LED Controller unite finally all the features that guarantee multifunctional operation and easy installation of a LED screen controller.The EX LED controller is available in three versions, a 1-channel dimming controller (EX-5), as a 2-channel version for WW / CW applications (EX-7) and the 4-channel version for RGBW applications (EX -8th). All models LTECH EX series, while enjoying the 4 zones (spaces) which can be controlled separately. The EX series is both a DMX signal to digital cabling to the recipients, as well as RF radio signals (2.4GHz) for wireless connection to the recipients from. Another highlight, the EX controller can be directly connected to the 230V mains, it eliminates the hassle of wiring a 12V line toward the wall controller. The EX series is the ideal solution for post-to-install LED controllers. Simply the wall controller in the existing flush box set and connect it to the 230V household power, place the wireless receiver near the LED lights, finished. The elegant design with the touch-sensitive glass surface make the EX controller in addition to the real eye-catcher in any room.Technical specifications:4 zones à. 4 channels (RGBW)each is individually adjustable zoneeach is individually dimmable ZoneOutput: DMX + radio (RF / 2.4GHz)LED Wall Controller Controller with the latest digital technologyRGB + W technique allows a choice of over 100 million colors (!)Noble glass surface with touch-sensitive keys and wheelprogrammed 11 different modes (color + gradients)Flow rate of the programs possibleT-PWM technology causes an almost perfect dimmingmultiple controllers can be operated in parallelLED status indicator (on / off) + acoustic signalvery high quality workmanship and an elegant designPower Supply: AC 230V ~Dimensions: 86 x 86 x 36 mmColor whiteWeight: 225g
60 super bright SMD 5050 red LEDs excellent quality used with 120 ° viewing angle per meter of the LED strip. Here, the LED Strip can be separated every 10 cm. The LED stripe is provided with a self-adhesive strip (3M 300 adhesive tape) on the back.LED Stripes can be used without difficulty by the very comfortable size at almost any location, such as the LED illumination of kitchens, bathrooms, in the living room but also in restaurants and many more places that are flexible depending on the purpose and situation to your color requirements should be adjusted.Our LED strips are supplied with a 15cm long cable.The connection is made directly to 24V or appropriate control systems.Technical specifications:red LED StripeSMD Stripe with 300 bright 5050SMD LEDsadhesive backingshortened always to 10cmLength: 500 cm / - only 2.0mm highWidth: 10mmvery flexiblecommon plusPower: 14.4 W / mDC24V version: can work with DC20V to DC28V InputLuminous flux: 450 lumens per meterProtection: IP54 single-sided glued with siliconeCertificates: UL, CUL, CE, RoHS
€59.00*
Immediately available or ready for collection
TOP MARKEN
LED Technology and Lighting
LED Stripes
We offer high quality LED stripes with rich colors, color mixtures and pleasant white tones. The strip is on a 5m roll, which can be cut every 25cm. They are self-adhesive, so laying is greatly simplified. For the LED stripes there are additional profiles / rails to visually embellish the installation in living rooms (-> category 'LED accessories and spare parts')
LED Panels
LED panels are modern, flat, inconspicuous lighting fixtures, perfectly suited for seminar rooms, offices or living rooms where a wide, pleasant light is preferred. They are available in different sizes, in white-light or RGB color mixing. Optionally, there is a suitable mounting set for ceiling mounting or suspended from ropes.
LED Power Supplies
An LED switching power supply is required to operate the LED lighting. Depending on the power of the LED light, the right power supply unit must be selected. The outdoor version offers quieter and fanless switching power supplies.
This website uses cookies to ensure the best experience possible. More information...
Herzlich willkommen!
Bitte wähle zuerst das gewünschte Lieferland.
Bitte bestätige deine Auswahl.
Alle Preise und Verfügbarkeiten werden entsprechend dem gewählten Lieferland aktualisiert.