Effect Machines


Effect machines are devices that create a special effect on stage, at an event or in your party room. For example: fog, haze, snow, bubbles or foam, wind and confetti rain. Various effects to heat up the party atmosphere or to create a certain atmosphere in the theater or on the stage... [ More ]

TOPSELLER



Topseller

Pump for S-120 ( M24030 )
Pumpe für Schaummaschine S-120 od. SM120Marke: Acme, Antari

€77.48*

Immediately available or ready for collection
Pump for FOG 2001/2002 and FX5
Pump for Antari Fogmaschine X-310, X-310II, Z-1000II, Z-1500II, Z-1200II, Z-3000II, W-510, W-515, W530, M-5, M-8, M-10, IP-1500

€34.90*

Delivery time from 8 to 10 weeks!
Z-800II Antari Fogger 800 Watt
Antari Mobility and Portability Fogger, tank capacity: 0,8 l , output: 3000 cuft/min, remote control with 10 m cable with stereo jack 6,3 mm connector, weight: 3.5 kg kg, dimensions.: 315 x 128 x 166 mm, owing to the ECO thermal control system, the Z-800II can undertake a fast-heat up time of 100 seconds only and produces a steady, continuous fog as long as you need it !! Perfect for smaller venues and DJs. Fluid consumption rate: 37 min./0,8 l

€189.00*

Immediately available or ready for collection
Main PCB for Antari FT-100
Main PCB for Antari FT-100

€129.60*

Delivery time from 8 to 10 weeks!
Antari B-100 X Bubble Machine
B-100X Easy Bubble Machine, Tank Capacity 0,7 Liter, Fluid Consumption Rate:2 Hr. / 1 Litre, Power Consumption 25W, Weight:4,2Kg, Dimension:341x170x172mmOptional Remotes: Z-10 ON/OFF Remote, Z-40 Time Remote Controller, BCR-1 Wireless Remote Controller, Fluid SBL-5 5 litre tank

€149.00*

Immediately available or ready for collection
Cap set for ADJ Entour series tank
Part of:EntourageEntour VenueEntour Haze ProEntour FazeEntour Faze Jr

€19.00*

delivery time 14 days
Tank for Z-1020
also suitable for: M-4, M-7, F-1, Ice-101, W-715, X-310, Z-1520, Z-1020

€7.00*

Immediately available or ready for collection
Fan Group for Antari F-3
Fan for Antari F3 Fazer.

€198.00*

Immediately available or ready for collection
Pumpe for Z-1200, Z-1500 and Z-3000 ( M24050 )
Pump for Type: Easy Fogger ( F-200 ), Thunderhead Mega, HP-5, Antari Z-1500, Z-3000, Brand: Antari, Acme

€99.00*

Immediately available or ready for collection
Smoke liquid flavour strawberry
Instruction:Put 1/2 bottle of the smoke liquid flavour into one 5 l can smoke fluid (20ml)

€2.90*

Immediately available or ready for collection
LED Board for M-7X Antari fog machine
LED PCB for Antari M-7X Fogger

€109.00*

Delivery time from 8 to 10 weeks!
Vapour Tank Nozzle
Vapour Tank Nozzle Antari HZ500

€44.88*

Immediately available or ready for collection
Heater for W-508 Antari fog machine (230V)
Heater for W-508 Antari fog machine (230V)

€141.90*

Immediately available or ready for collection
Fog tube 100 mm alloy
Alloy fog tube with a 100 mm diameter and a 10 m lenght.

€19.90*

Immediately available or ready for collection
Flightcase for two fog machines Antari
Suitable for: Z-1020, Z-1520, W-715 and Z-350Maße: 495 x 418 x 500 mmGewicht: 12,3 kg

€199.00*

Immediately available or ready for collection
Antari Z-1000 II fog machine 1000 W
DMX on board1,7 l tank capacity 10.000 cuft/min fog outputRemote control with 10 m with jack 6,3 mm stereo connectorWeight: 6,6 kgSize: 433 x 198 x 151 mmWith the new eco thermal control system and the patented unicore heater technologymounting bracket includedfluid consumption rate: 49 min / l

€329.00*

Immediately available or ready for collection
Antari WTR-20 Antenna and Transmitter W-2 (433 MHz)
Compatible With : S-500- S500L, Z-380, M-7 RGBA, FT-100, Z-1520 RGB, FT-200

€89.00*

delivery time 14 days
Time Remote Controller for M-1 Accu Fogger

€49.00*

Immediately available or ready for collection
Confetti Shooter 50 cm, gold
Confetti ShooterLength: 50 cmCylinder filled with gold paper confettiflies the confetti up to 6 mthe mechanism is triggered by turning the lower partcomplies with SP 371 (1)BAM testedflame retardant - B1 certifiedfor single use

€9.50*

delivery time 14 days
ADJ Bubbletron XL
Portable high output bubble machine with durable plastic casing and large, EZ-Access front fluid tank. Creates hundreds of bubbles per minute.Portable high output bubble machine - creates hundreds of bubbles per minute Extra-large, durable plastic casing with EZ-Access front fluid tank Large dual high velocity fans makes bubbles rise quickly in the air ON/OFF switch on rear of unitCarrying handleMost types of bubble liquid acceptablePower Consumption: 37W @ 120V / 14W @ 230VTank Capacity: 2 LiterFluid Consumption Rate: 40ml/ per minuteVoltage: AC120/60Hz or 230V/60HzDimensions (LxWxH): 359x266x278mmWeight: 9 lbs. / 3.7 kgs.Includes 9-foot /3M On/Off Wired Remote Control

€155.00*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails
We have 3 types of fog machines:

> FOG MACHINES
A fog machine basically consists of a pump that pumps the fog fluid from a container into the heating element. The heating element and a controller. The fog fluid is vaporized in the heating element and powerfully ejected from the nozzle due to the resulting pressure. This can be up to 15m with large fog machines. This creates a haze or a dense fog for each fog liquid.
Fog machines with LED lighting are also new. Coloring the fog can create great effects.
A CO2 effect can also be created with a fog machine by using a CO2 fog fluid.

> FAZER
Basically, the Fazer works like a fog machine. In addition, the Fazer has a fan that distributes the fog output better in the room. Technically, the Fazer is a smooth, continuous, low-output smoke machine. The fazer thus ensures a fine and thin fog, which allows light effects and lasers in particular to shine with great spatial effects.

> HAZER
The hazer (haze generator) is very similar in effect to a fazer. However, it does not create a dense fog that should be visible as an effect, but an almost invisible haze to support the multidimensional effect of the light show, i.e. to make the light rays visible. Hazers atomize the fluid using a compressor. This is done via the compressor using ultrasound, not via the evaporation of a heating element as is the case with the fog machine, which is why a special hazer fluid is also required.

> GROUND FOG MACHINES
In order to keep the fog on the ground, the fog that is emitted must be cooled. This can be done with ground fog machines with ice, dry ice or a cooling unit. The cooled fog stays on the ground longer due to the thermal effect.
Ground fog can also be created with a dry ice machine. Here the chemical reaction of dry ice with hot water is used. Dry ice (-75 C°) is flushed with hot water and thus quickly melted. As a result, the dry ice converts to the CO2 gas state and creates a fog that glides away from the ground.