LED technology and LED lighting include all installation lighting in restaurants, bars or at home as well as LED strips for indirect or direct lighting, for example. in the kitchen or at the bar or LED panels; With their inconspicuous modern design, these ensure a beautiful, wide, smooth light in the room.
60 super bright SMD LEDs 5050 RGB excellent quality used with 120 ° viewing angle per meter of the LED strip. Here, the LED Strip can be separated every 10 cm and it is provided with a self-adhesive strip (3M 300 adhesive tape) on the back.LED Stripes can be used without difficulty by the very comfortable size at almost any location, such as the LED illumination of kitchens, living rooms and many more that can be flexibly adjusted depending on the purpose and situation to your color requirements.Our RGB strips are supplied with a 15cm long cable.The connection is made directly to 24V or appropriate control systemsTechnical specifications:RGB Color Changing LED StripeSMD Stripe with 300 bright 5050SMD LEDsadhesive backingshortened always to 10cmcan be controlled by RGB ControllerLength: 500 cm / - only 2.0mm highWidth: 10mmvery flexiblecommon plusPower: 14,4W / mDC24V version: can work with DC20V to DC28V InputLuminous flux: 710 lumens per meterProtection: IP54 single-sided glued with siliconCertificates: UL, CUL, CE, RoHS
The LED controller has the latest digital processors that an absolutely homogeneous, linear control of the LED constant voltage lights (LED stripes, etc.) allows. High-performance and technically the controller is currently the benchmark and certainly belong to the benchmark of modern LED lighting control.The controller is a 4 channel (RGBW) DMX / PWM controller which converts a digital DMX512 signal into corresponding 12V-24V low voltage power for the operation of LED strips common anode. In addition, the controller has 7 internal stand-alone programs, the choice of 3 dimming curves and an operation with 16-bit resolution.All functions are displayed on the large OLED display and can be operated using the three function buttons. The controller runs in the voltage range between DC5V- DC24V and has a capacity of 4x5A per channel (max. 20A / Controller). It is supplied in a stable, high-quality plastic housing. The connections are made via screw terminals.Technical specifications:4-channel DMX / PWM LED Controller16-bit or 8-bit mode selectable OLED display for function control7 internal stand-alone programs3 dimming curves adjustable (linear / Gamma / 1-gamma)0-100% dimming LEDindividual control of each channel DMX signalDC5V-DC24V / 5A per channel (max. Total 20A)255 brightness steps per channelAcoustic SignallingInput and output via screwstable plastic housingOverload and short circuit protectionDimensions: 175x44x30 mm (LxWxH)Weight: 0.35 Kg
Designed with 5 channels output, and Max. 6A current per channel, up to 720W output powerEasy operation with LED screen and the touch buttons.Support 3 kinds of DMX ports : 3-pin XLR, RJ45, green terminal.With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting,equipment recognition, etc.With short circuit protection and over current protection, as well as warning function when fault.With fast self-testing function.High/low PWM frequency for optional.LOW 500 Hz / High 4000 Hz16bit (65536 levels) / 8bit (256 levels) grey level optional.Technical Specs:Input signal DMX512/RDMInput voltage DC12V~DC24VMax load current 6A x 5CH Max. 30AMax output power (0~72W...144W) x5CH Max. 720WDMX512 socket 3-pin XLR, RJ45, green terminalGray scale level 8bit(256 levels)/16bit(65536 levels)Working temperature -30°C~65°CDimension L169×W80×H39mmPackage Size L182×W91×H41mmWeight (G.W) 550g
Designed with 4 channels output, and Max. 6A current per channel, up to 576W output power.Easy operation with LED screen and the touch buttons.Support 2 kinds of DMX ports with signal isolation function: 4-pin XLR,RJ45.With RDM remote management protocol, the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting,equipment recognition, etc.With shortcut protection and over load protection, as well as warning function when fault.With fast self-testing function.High/low PWM frequency for optional.LOW 500 Hz / High 4000 Hz16bit (65536 levels) / 8bit (256 levels) grey level optional.Technical Specs:Input signal DMX512/RDMInput voltage DC12V~DC24VMax load current 6A x 4CH Max. 24AMax output power (0~72W...144W) x4CH Max.576WDMX512 socket 3-pin XLR, RJ45Gray scale level 8bit (256 levels) / 16bit (65536 levels)Working temperature -30°C~65°CDimension L122×W110×H37(mm)Package Size L127×W123×H41mmWeight (G.W) 550g
Lite Puter AW-105 Wall-mounted LED dimmer for precise dimming soluons.Importing CPU microprocessor 16384-step dimming curve controlStable dimming and non-flickering even on only 1% of brightness.Generally, wall-mounted dimmers are simple and cheap to phase dimming and more than enough for tungsten lamp dimming control, but not for LED dimmer, especially the flickering issue.Liteputer's AW-105 LED-specific wall-mounted dimmer solves the problem completely, with CPU microprocessors as control master, providing up to 16384 step high resoluons with precisely dimming requirement on each step, non-flickering even on only 1% of dimming level.- Easy wiring- Max current 5A- AC stable power supply- CPU 16384-step-solution dimming curve- continuous TRIAC drive to prevent mistaken trigger- Active anti-flickering circuit- Minimum brightness calibration for all kinds of bulbsDimension: 70W x 120H x 35D mmWeight: 0,6 kg
Universal inputOverload protection, pulsing hiccup shutdown, auto recoveryProtections: short circuit/over load/over voltageIP67, for indoor and outdoor installationsUL1310 Class 2Fixed output voltageDevices only for use in equipment with another primary purpose such as photocopiers, overhead projectors and slide projectors or for scale illumination or indication purposes.Suitable for indoor use and outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes.Input Voltage: 90...264V AC (47...63Hz), 127...370V DCInput Inrush Current, Max.: 60 AOver Load Protection: 110...150%Withstand Voltage (I/P-O/P): 3000V ACOperating Temperature: -30...+75°CWeight: 340g
Universal inputOverload protection, current limiting, auto recoveryprotected against short circuit, overload, overvoltageBuilt-in active PFC functionLED and lighting applicationsEN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13Type B:IP67, for indoor and outdoor applications3in1 dimming function (external voltage 1 ... 10 V DC, PWM, potentiometer)adjustable current limit via control lineInput voltage range: 90 ... 305V AC (47 ... 63Hz) 127 ... 431V DCInrush current, max .: 75AOvercurrent protection: 95 ... 108%isolation voltage• Input to output: 3750V AC• Input to ground: 1880V AC• Output to ground: 500V ACOperating temperature range: -40 ... + 70 ° CWeight: 1880g
LED Power supply 12V 50W 4.2AUniversal AC input: 88-264V ACShort circuit, Over-load, Over-voltage protectionsFree air convection coolingLED indicator for Power-ON100% full load burn-in testAl using 105°C Long life electrolytic capacitorsHigh operating temperature up to 70°CWithstand 5G vibration testHigh efficiency, long life and high reliabilitySafety standards: UL60950-1, TÜV EN60950-1 approvedConnections: Terminal block for input and output
Switching power supply in a closed design with guard screw. Direct mounting on the DIN rail.Universal input voltage with wide rangeOverload protection by current limit, shutdown after 3 secondsShort circuit, overload, overvoltage protectionBuilt-in PFC circuitLED indicator for power onDC OK relay contactpeak loadOutput voltage 24 VDC Current 20A Performance 480 W Inrush 80 A Input voltage 90 - 264 VAC Input voltage 127 - 370 VDC Ripple & Noise 100 mV Efficiency 94 % Length 125,2 mm Width 85 mm Height 128,5 mm Short circuit protectedOverload protectionSurge protection
Switching power supply for LED 24V/4,5A Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 4,5 AOutput power 100 W, working voltage adjustable approx. 21,6 - 26,4VInput voltage 88 - 264 VACFrequency 47-63 Hz, 1,5A / 230 VACConnection: terminal screwSize: 199 x 98 x 38 mm
67,00 €*
delivery time 14 days
TOP MARKEN
LED Technology and Lighting
LED Stripes
We offer high quality LED stripes with rich colors, color mixtures and pleasant white tones. The strip is on a 5m roll, which can be cut every 25cm. They are self-adhesive, so laying is greatly simplified. For the LED stripes there are additional profiles / rails to visually embellish the installation in living rooms (-> category 'LED accessories and spare parts')
LED Panels
LED panels are modern, flat, inconspicuous lighting fixtures, perfectly suited for seminar rooms, offices or living rooms where a wide, pleasant light is preferred. They are available in different sizes, in white-light or RGB color mixing. Optionally, there is a suitable mounting set for ceiling mounting or suspended from ropes.
LED Power Supplies
An LED switching power supply is required to operate the LED lighting. Depending on the power of the LED light, the right power supply unit must be selected. The outdoor version offers quieter and fanless switching power supplies.
This website uses cookies to ensure the best experience possible. More information...
Herzlich willkommen!
Bitte wähle zuerst das gewünschte Lieferland.
Bitte bestätige deine Auswahl.
Alle Preise und Verfügbarkeiten werden entsprechend dem gewählten Lieferland aktualisiert.
