Universal Table Stand for TabletsStepless (without fixed increments) adjustment of inclinationRotates for horizontal and vertical positionWidth of the tablet: 128 mm to 232 mmHeight of the tablet: 222 mm to 334 mmThickness of the tablet: 6 mm to 11 mmWeight: 1.3 kgColour: BlackSuitable for the following tablets (among others):iPadiPad AiriPad ProiPad Pro (12.9")Amazon Fire HDX 8.9Samsung Galaxy Tab from 9.7Google Nexus 9Asus TransformerMicrosoft Surface and Surface ProDelivery without tablet

K&M 19708 Tablet PC Magnet Holder Version: black Special feature: noise-dampening thanks to small adhesive pads Material: plastic, steel Dimensions: 46.5 x 44 x 27mm Weight: 0.052kg The safe and flexible attachment for your tablet. With the magnetic holders, four per set, you can transform every orchestral music stand with a steel plate into a practical one Tablet PC tripod

K & M 19791 Universal Tablet PC holder blackTablet sizes adjustable without toolsBracket for tubes up to 30 mm diameterHeight 222-342 mmWidth 128-232 mmThickness of the tablet 5-11 mmStepless adjustment of the tilt, rotate for landscape and portrait modesWeight 0.6 kgSuitable for:iPadiPad AiriPad ProAmazon Fire HDX 8.9Samsung Galaxy Tab from 9.7Google Nexus 9Asus TransformerMicrosoft Surface and Surface ProWeight: 0,75 kgColour: black

For attaching to tubes up to 30 mm in diameterCan also be screwed onto any 3/8" threadRotatable by 90°Infinitely adjustable (no fixed increments) to adapt to different tablet sizes without toolsMaterial: Plastic and steelWidth: 102 - 189 mmHeight: 163 - 242 mmDepth: 5 - 11 mmWeight: 0.697 kgColour: Black

ART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet (MM) to a wide variety of audio systems.The Precision Phono Preamp’s extraordinarily low noise amplifier allows connection to MC cartridges without picking up noise or distortion that transformers can exhibit. The audio is kept pristine with a low-cut filter to remove rumble and low frequency feedback, commonly undesirable for DJ’s and home use.Analog inputs on the ART Precision Phono Pre amp are switchable between Moving Magnet and Moving Coil. The unit changes both the gain and the cartridge loading to suit the selected cartridge. The front gain trim control with the signal present/clip LED allows the user to optimize the output for a wide range of cartridges.- Connect any turntable to a wide variety of audio systems. - Perfect for DJs and vinyl enthusiasts. - Switchable low cut rumble filter- Variable preamp gain- Signal Present/Clip Indicator - RCA preamp outputs- External power supply for lower noise - High accuracy/ low noise phono preamp - Moving Coil/Moving Magnet switchable input

Lightsource: 1W COB LEDColor: Cool WhiteLength: 13"Beam: 110°Voltage: 12V DCCurrent: 295 mAConnection: 3p XLR type

The Roland DJ-505 is a two-channel, four-deck Serato DJ Pro controller that blends the advanced performance capabilities of Serato DJ Pro with the legendary sounds and sequencing of Roland’s TR-909, TR-808, TR-707, and TR-606 drum machines. The DJ-505 gives you the tools to move beyond mixing music to creating beats and rhythms on the fly that sync to your Serato DJ Pro tracks, enabling the creation of unique transitions, live remixes, beefed-up classic tracks, or your own original music.Like the flagship DJ-808 and compact DJ-202 controllers, the DJ-505 is a powerful and inspiring instrument that allows unparalleled flexibility to DJ, remix, and produce, empowering exciting new approaches to music performance. And with its standalone mixer functionality, narrow footprint, and Serato DVS upgrade path, the DJ-505 is an ideal controller to pair with turntables or CD players.SPECIFICATIONS:Signal processing: Sampling Frequency: 48 kHzNominal input level: INPUT (1 - 4) (RCA phono type, LINE): -12 dBuINPUT (1, 2) (RCA phono type, PHONO): -39 dBuMIC IN (1/4-inch phone type): -60 dBuNominal output level: MASTER OUT 1: +6 dBu (balanced)MASTER OUT 2: +0 dBuBOOTH OUT: +6 dBu (balanced)Input impedance: INPUT (1- 4) (RCA phono type): 47 k ohms or greaterMIC IN (Combo type): 7 k ohms or greaterOutput impedance: MASTER OUT 1: 600 ohms (balanced)MASTER OUT 2: 1 k ohm (unbalanced)BOOTH OUT: 600 ohms (balanced)PHONES: 44 ohmsFrequency response: 48.0 kHz: 20 Hz - 22 kHz (+0/-2 dB)Connectors: INPUT (1 - 2) jacks: RCA phono typeMIC IN jack: 1/4-inch phone typeMASTER OUT 1 connectors: XLR type (balanced)MASTER OUT 2 jacks: RCA phono typeBOOTH OUT jacks: TRS phone type (balanced)PHONES jacks: stereo 1/4 inch phone type, miniature phone typePC port: USB type BMIDI OUT connectorDC IN jackPHONO GROUND terminalPower supply: AC adaptorCurrent draw: 2,000 mAAccessories: Startup GuideLeaflet "USING THE UNIT SAFTY"AC AdaptorPower codeUSB cableSerato TOOL KIT VOUCHERSIZE AND WEIGHTWidth: 530 mm 20-7/8 inchesDepth: 402 mm 15-7/8 inchesHeight: 73 mm 2-7/8 inchesWeight: 3.5 kg 7 lbs 12 oz

With Bluetooth receiverPlayback of Audio-CDs, MP3/MP2 and WAV files on CDAudio playback of internet radio or network files over Bluetooth connection via phone or computerUp to eight different Bluetooth devices storableFeatures like continuous playback, repeat playback and scan play (Intro Check)CD Text and ID3 tag supportVariable playback speed / pitchConnections: Analog output RCA, S/PDIF digital coaxial and optical output, stereo headphone outputFormat: 19"/2UWeight: 4.5 kgIncluding remote control

Playable formats: Audio CDs, MP3 and WMA files on CD, MP3/AAC/WAV/WMA on SD and USB storage media, DAB +/FM radio and files on a smartphone or computer via a Bluetooth connectionNumeric keys for direct numerical title selectionPlayback normal, single, random, repeatedFolder playback with SD and USB mediaCopy from CD or Radio to SD or USBStart of playback with power supply2x Line output XLR/RCAAUX Input 3.5 mm mini jack stereoHeadphone output 6.3 mm stereo jack2x Tuner output RCA (L/R)DAB Antenna inputRS-232C connector for remote controlLC-DisplayBody shape: 19" / 1 UDimensions (W x H x D): 483 x 47 x 296 mmWeight: 3.3 kgIncl. IR remote controlOptional Extendable with Ethernet card (IF-100E) for external control via network (Telnet) (Ethernet card not included)

SEVENTYIntuitive high-performance layout(3) contactless MAG FOUR fadersExternal control over the crossfader voltageMade of solid steel & handles with shock protection on thefront(6) dual, post-fader with internal FLEX FXSerato DJ effects controlIndependent pad modes per channel(32) Midi assignable padsControls for browsing and track selectionIntuitive instant double buttons with selectable sync on-offor silent cue modeDedicated loop controlsDual effect paddle made of aluminum injection molding, through 180 °rotatableRANE TWELVE connectionDual microphone inputsIndustry-leading signal-to-noise ratio: 114dBDual USB connections for DJ transfers16 Akai Professional MPC Performance PadDimensions (W x D x H): 285 x 445 x 105 mmWeight: 5.6 kg

ADVANCED FOUR-CHANNEL STEMS DJ CONTROLLERDESIGNED FOR CREATIVITY, BUILT TO LASTThe FOUR brilliantly combines the latest in performance-focused DJ technology with RANE’s tried-and-true build andindustry-leading sound quality. The result is a bulletproof, great sounding, feature-packed DJ controller that will unleashexciting new levels of creativity in your DJ sets and livestreams. With never-before-seen features like STEM-SPLIT,Performance Pad OLED displays, and a new dynamic internal FX engine, the FOUR is the world’s most advanced 4-channelStems DJ controller.HARNESS THE POWER OF SERATO STEMSRANE and Serato have a long history of creating groundbreaking DJ products together, dating back to the RANE SL1 boxin 2004. The RANE FOUR takes this partnership to the next level by melding the industrial-grade build and sound qualityof RANE hardware with the powerful new Stems capabilities of Serato DJ software. The result is a next-level DJ controllerwith unprecedented Serato Stems control. A dedicated Stems Pad Mode, Instrumental and Acapella buttons, and RANE’sexclusive STEM-SPLIT feature provide you with the ultimate Stems workflow and experience to fully elevate your creativityas a DJ.NEW LEVELS OF CREATIVE FXThe newly designed internal FX suite features 22 paddle-triggered, fully customizable Main FX and 4 knob-controlledChannel FX for adding flavor and personality to individual Stems elements and tracks. This robust FX suite featurestraditional FX classics like Reverb and Echo and exhilarating new additions including Scale Down, Recycler, Riser, andmore. The Channel FX section offers dynamic, hands-on manipulation of 4 knob-controlled FX including Filter, Filter Roll,Noise, and Flanger. The RANE FOUR also allows you to switch seamless back and forth between the built-in hardware FXand Serato’s software FX, providing limitless options for any style of DJing.FOUR CHANNELS OF PERFORMANCE POSSIBILITYThe 4-channel mixer section features full EQ control and intuitive FX assignment options, plus 2 external Line/Phonoinputs for external turntables or decks. The FOUR is DVS-enabled and unlocks both Serato DJ Pro and Serato Pitch ‘n Timewhen connected to laptop running the latest version of Serato. Enhanced Sampler routing options allow you to controlthe Sampler volume via a dedicated knob, or assign the audio to Channel 4 so that you can layer FX on top of your DJdrops, instruments, and other samples. The quick-access deck selection buttons allow for swiftly switching platter controlbetween software decks, and the FOUR also supports external modular decks like the RANE TWELVE MKII and the DenonDJ LC6000 for a full physical 4-deck mixing experience.FOCUS ON YOUR PERFORMANCE, NOT YOUR LAPTOPThe 8 OLED displays above the Performance Pads on each deck offer visual feedback for all pad modes, making it easierthan ever to see the function of each pad without having to look at the computer. See Cue, Loop, and Sample names aswell as Roll and Loop lengths, beat divisions, Pitch Play tuning, and Stem elements and FX.THE BEST STATIC PLATTERS..EVERThe 8.5” capacitive jog wheels were designed to be the smoothest and most accurate static jog wheels available on a DJcontroller. A central color display indicates play head position, BPM, pitch percentage, pitch range, overview waveformwith Hot Cue markers, song key, time, loop size, deck selection, Beat Jump length and more.TRUSTED RANE QUALITYThe RANE FOUR is the only 4-channel DJ controller built to RANE’s rigorous standards. Solid, bulletproof construction,MAG-FOUR crossfader with curve adjustment and channel assignment switches, aluminum FX toggles, and industryleadingsound quality and connections ensure that the RANE FOUR will always perform like a champ, no matter what.Technical SpecificationsDigital Audio Converters: Cirrus Logic, 24-bit PCM, 48 kHzDigital Signal Processing: 32-bit, Floating Point, Double precisionDynamic Range (A-weighted, unity gain):ADC: 113 dBDAC: 113 dBCD Input to Analog Output: 110 dBCD Input to USB Output: 113 dBUSB Input to Analog Output: 113 dBConnections (2) XLR outputs (Main)(2) 1/4” outputs (Booth)(1) RCA stereo output pair (Main)(2) XLR / 1/4” (6.35 mm) TRS inputs (Mic 1–2)(2) RCA stereo input pairs (Deck 3-4)(1) 1/4” (6.35 mm) TRS output (Headphones)(1) 1/8” (3.5 mm) TRS output (Headphones)(2) USB Type-B ports(1) IEC power cable inputAudio Outputs Main Outputs (XLR):Gain Trim: Off to 0 dBMaximum Output: 8 VrmsTHD+N (20 kHz BW @ 1 kHz): 0.004%Frequency Response: Flat - 20-20kHzMain Outputs (RCA stereo pair):Maximum Output: 4 VrmsTHD+N (20 kHz BW @ 1 kHz): 0.004%Frequency Response: Flat - 20-20kHzBooth Outputs (1/4”):Gain Trim: Off to 0 dBMaximum Output: 8 VrmsTHD+N (20 kHz BW @ 1 kHz): 0.004%Frequency Response: Flat - 20-20kHzHeadphone Outputs (1/4”/6.35 mm and 1/8”/3.5 mm TRS):Maximum Output: 4 Vrms Voltage: (no load)Output Power: 50 mW (50 ohms)Dynamic Range (A-weighted): 108 dBAudio Inputs Microphone 1/2 (Combo XLR/1/4” [6.35 mm] TRS):Analog Gain: 25 dBMaximum Input: 110 mVGain Trim: Off to +26 dB (unity at center)Tone Control: 2-bandLine/Phono Inputs 3/4 (RCA stereo pairs, switchable):Line: LineMaximum Input: 4 VrmsGain Trim: Off to +12 dBTone Control: 3-band, full-cut to +10 dBTHD+N (20 kHz BW @ 1 kHz: 0.004%Phono: RIAARIAA Curve: +/-0.25 dBGain (@ 1 kHz): 31.5 dBMaximum Input (@ 1 kHz): 106 mVDynamic Range (A-weighted): 102 dBPads (16) on/off multi-color back-lit pads (8 per deck, 9 modes eachWheel Displays (2) 320 x 240 Color LCD’sPad & FX Displays (9) 128 x 32 Monochrome OLED’sFaders (1) MAG FOUR tension-adjustable crossfader with contour(4) Standard channel fadersPower Connection: IECVoltage: 100–240 V, 50/60 HzConsumption: 20 WDimensions(width x depth x height)Dimensions (width x depth x height): 30.8” x 15.9” x 4.2”782.32 x 403.8 x 106.6 mmWeight 18.25 lbs.8.27 kg

DVS / USB MIDI control for Serato DJ Pro, Traktor and Virtual DJOLED screen, selection control & BPM displayNavigation Control: Scroll / Load, Back & Instant DoublesNew “submerged” start / stop buttonComplete, motorized 12-inch turntable for playbackcontrolTraditional, familiar turntable layoutOLED screen display (BPM display / control status)Dual mode strips: track search and 8 hot cue triggers5.0 kfcm motor High-torque motor with adjustable torque(Hi / Low) for more traditional setups4 control decks, can be used individually or several at the same timeExtreme precision — 3600 ticks of platter resolution for seamlessperformanceMIDI interface via USB connected to the SEVENTY-TWO MKII orthe computer can be connectedRCA output for DVS audio signalsPlatter speeds: 33 1/3 and 45 RPM8/16/50% pitch with precise dual resolution sliderRotary knob on the top and traditional engine stopSwitch, enables classic wind-down effects

7.2 "motorized platter with quick release acrylic discsReliable RANE processing quality and familiarFeelingInstant access to software effects with 2 FX paddles outmetalUltra-light MAG FOUR crossfaderHigh / low pass filter & 3 band EQDedicated loop controlsIndependent multi-mode performance pads including SeratoScratch banksTurntable style start / stop buttonXLR main & booth outputs(2) Line / Phono inputs(2) TRS / XLR microphone inputs(2) USB computer portsPortable DJ controller (24lbs / 10kg)Serato DJ Pro included (upgrade to Serato DVSchargeable)

Decksaver is designed and manufactured in England and offers the perfect protective cover for the Reloop Mixon 4. Thanks to its precisely fitting shape, it offers optimal protection against dust, dirt and liquids and thus maintains the life of your equipment. Since the protective cover is made of transparent polycarbonate, it not only flatters your Reloop Mixon 4 visually, but is also easy to attach and absolutely durable. Polycarbonate is also used for bulletproof glass; This robust material means that Decksaver's protective covers are of a much higher quality than conventional acrylic covers. Decksaver is the worldwide standard for protective covers and is an integral part of many international clubs and bars as well as many home studios.Featuressuitable for the Reloop Mixon 4Protects against dust, dirt, liquids and impactsCustom-made, puts a second skin on your equipment without having to disconnect the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 66,0 x 37,0 x 3,5 cm Weight: 1,16 KgThe additional devices shown or mentioned are not included in the scope of delivery.

Decksaver is designed and manufactured in England and offers the perfect protective cover for the Reloop Elite. Due to its precise shape, it offers optimal protection against dust, dirt and liquids and thus maintains the life of your equipment. As the protective cover is made of transparent polycarbonate, it not only flatters your Reloop Elite visually, but is also easy to attach and absolutely durable. Polycarbonate is also used for bulletproof glass; This robust material means that Decksaver's protective covers are of a much higher quality than conventional acrylic covers. Decksaver is the worldwide standard for protective covers and is an integral part of many international clubs and bars as well as many home studios.Featuressuitable for the Reloop EliteProtects against dust, dirt, liquids and impactsCustom-made, puts a second skin on your equipment without having to disconnect the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 40.70 x 29.60 x 4.4 cmWeight: 0.495 kgThe additional devices shown or mentioned are not included in the scope of delivery.

Decksaver is designed and manufactured in England and offers the perfect protective cover for the Denon X1800 Prime. Due to its precise shape, it offers optimal protection against dust, dirt and liquids and thus maintains the life of your equipment. Since the protective cover is made of transparent polycarbonate, it not only flatters your Denon X1800 Prime visually, but is also easy to attach and absolutely durable. Polycarbonate is also used for bulletproof glass; This robust material means that Decksaver's protective covers are of a much higher quality than conventional acrylic covers. Decksaver is the worldwide standard for protective covers and is an integral part of many international clubs and bars as well as many home studios.Featuressuitable for the Denon X1800 PrimeProtects against dust, dirt, liquids and impactsCustom-made, puts a second skin on your equipment without having to disconnect the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 43.9 x 31.3 x 3.3 cmWeight: 0.6 kgThe additional devices shown or mentioned are not included in the scope of delivery.

Decksaver is designed and manufactured in England and offers the perfect protective cover for the Reloop RP7000 / RP8000. Due to its precise shape, it offers optimal protection against dust, dirt and liquids and thus maintains the life of your equipment. Since the protective cover is made of transparent polycarbonate, it not only flatters your Reloop RP7000 / RP8000, but is also easy to install and absolutely durable. Polycarbonate is also used for bulletproof glass; This robust material means that Decksaver's protective covers are of a much higher quality than conventional acrylic covers. Decksaver is the worldwide standard for protective covers and is an integral part of many international clubs and bars as well as many home studios.Featuressuitable for the Reloop RP7000 / RP8000Protects against dust, dirt, liquids and impactsCustom-made, puts a second skin on your equipment without having to disconnect the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 46.2 x 35.5 x 8.5 cmWeight: 0.65 kgThe additional devices shown or mentioned are not included in the scope of delivery.

Decksaver is designed and manufactured in England and provides the perfect protective cover for the Denon SC6000 / M Prime. Due to its precisely fitting shape, it offers optimal protection against dust, dirt and liquids and thus preserves the service life of your equipment. Since the protective cover is made to measure from transparent polycarbonate, it not only flatters your Denon SC6000 / M Prime visually, but is also easy to attach and absolutely durable. Polycarbonate is also used for bulletproof glass; Thanks to this robust material, the protective covers from Decksaver are of much higher quality than conventional acrylic covers. Decksaver represents the global standard for protective covers and has become an indispensable part of many international clubs and bars as well as many home studios.Featuressuitable for the Denon DJ Prime SC6000 and SC6000MProtects against dust, dirt, liquids and knocksCustom-made, lies like a second skin on your equipment without having to unplug the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 47.0 x 32.2 x 7.0 cmWeight: 0.6kgThe devices shown or mentioned are not included in the scope of delivery.

Decksaver is designed and manufactured in England and offers the perfect protective cover for the Reloop RMX 90 / RMX 80 or RMX 60. Thanks to its precisely fitting shape, it offers optimal protection against dust, dirt and liquids and thus maintains the life of your equipment. Since the protective cover is made of transparent polycarbonate, it not only flatters your Reloop RMX visually, but is also easy to attach and absolutely durable. Polycarbonate is also used for bulletproof glass; This robust material means that Decksaver's protective covers are of a much higher quality than conventional acrylic covers. Decksaver is the worldwide standard for protective covers and is an integral part of many international clubs and bars as well as many home studios.Featuressuitable for the Reloop RMX-90/80/60Protects against dust, dirt, liquids and impactsCustom-made, puts a second skin on your equipment without having to disconnect the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 37.5 x 32.5 x 3.5 cmWeight: 0.56 kgThe additional devices shown or mentioned are not included in the scope of delivery.

Decksaver is designed and manufactured in England and offers the perfect protective cover for the Numark NV. Thanks to its precisely fitting shape, it offers optimal protection against dust, dirt and liquids and thus maintains the life of your equipment. Since the protective cover is made of transparent polycarbonate, it not only flatters your Numark NV visually, but is also easy to attach and absolutely durable. Polycarbonate is also used for bulletproof glass; This robust material means that Decksaver's protective covers are of a much higher quality than conventional acrylic covers. Decksaver is the worldwide standard for protective covers and is an integral part of many international clubs and bars as well as many home studios.Featuressuitable for the Numark NVProtects against dust, dirt, liquids and impactsCustom-made, puts a second skin on your equipment without having to disconnect the cablesMilky transparent surfaceHigh qualitymade of polycarbonateEasy to useDimensions (LxWxH): 55,5 x 32,5 x 3,2 cm Weight: 0,72 KgThe additional devices shown or mentioned are not included in the scope of delivery.