Light Controllers


Here you will find everything you need to control your lighting. From mixers, software, simple controllers as well as dimming and switch packs.

TOPSELLER



Topseller

EPX 420 Liteputer, 4 channel DIN-Rail switch pack
EPX is a series of 2/ 4/ 8 channel DIN-Rail switch packs. The capacity of each channel is 30A/ 20A/ 10A respectively.The protocol of EPX series is standard DMX-512. The switch-on point (DMX signal input value) can be manually set from 10% to 60%. When multi-channels are turned on together, EPX series can manually set the delay time among each channel being switched on to avoid inrush current.Features:20 schedulers.2/4/8 channels, each channel can be set as ON/OFF/AUTO individually.Adjustable switch-on point (DMX 10% to 60%).Self-sustaining relay (EPX-430 only).Maximum 99 zones.Connectable to ECP control panel, each one can work independently or synchronously.Specifications:Power: AC 90-240VProtocol: RS-485 (EDX)/ DMX-512Capacity: EPX-410: 4CH, 10A per channel, total: 40A; EPX-420: 4CH, 20A per channel, total: 80A; EPX-430: 4CH, 30A per channel, total: 120A; EPX-810: 8CH, 10A per channel, total: 80A; EPX-210: 2CH, 10A per channel, total: 20ASigal Connector: 4 PIN green terminalMounting: Mounts on 35mm DIN-RailDimension: 158(W)*59(H)*88(D)mmWeight: EPX-410/ 420/ 430: 480g; EPX-810: 490g; EPX-210: 440g

249,00 €*

Immediately available or ready for collection
Sunlite Stick GU 2 Touch-sensitive glass fronted DMX controller the baby
The STICK 2 is one of our most exciting developments within the architectural market. The controller comes pre loaded with RGB effects and can be programmed with the Easy Stand Alone software. with power suppyThe unit features:-DMX512 Stand Alone Controller with a glass face-3 touch sensitive buttons for simplicity and reliability-dynamic scenes created step by step with adjustable timing-live setting of the intensity and color of a scene-programmable with the included USB cable and control software-5 pin connector block at the rear : 3xDMX 2xpower-works with 5-12V AC/DC adapter (optional)-128 DMX channels-dimensions: 86x86mm, only 10mm thick

199,00 €*

Immediately available or ready for collection
Sunlite Stick GA2 the big boy with glas surface white
The STICK GA2 is one of our most exciting developments within the architectural market. The controller comes pre loaded with RGB effects and can be programmed with the Easy Stand Alone software. with power suppyThe unit features:-DMX512 Stand Alone Controller with a glass face-4 touch sensitive buttons for simplicity and reliability-dynamic scenes created step by step with adjustable timing-live setting of the intensity and color of a scene-programmable with the included USB cable and control software-5 pin connector block at the rear : 3xDMX 2xpower-works with 5-12V AC/DC adapter-512 DMX channels-dimensions: 86x110mm, only 10mm thick

359,00 €*

Immediately available or ready for collection
Sunlite Easy Stand Alone USB version U9
Low cost Stand alone USB DMX interface, 265 channels, limited 20K memory. Works with Easy Stand Alone software only (not compatible with ESA Pro, Suite and Suite 2 Software). Delivered with an installation CD Rom including user manual. (9V power supply optional).Compatible with Windows Seven/8/10 32-bit or 64-bit version.

238,80 €*

delivery time 14 days
Showtec DB-1-4 RDM 1HE 19" 4 Way DMX Distributor / Splitter 3 & 5 pin. XLR
The DB models from Showtec are universal DMX-512 splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional “Trough” port. They can be mounted in any 19” rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to show the DMX signal status of each output and input. There are four models available, DB-1-4 with or without RDM which has 4 outputs and 3 & 5 Pole XLR connectors, and the DB-1-8 with or without RDM which has 8 outputs with 3P XLR connectors.DMX/RDM splitter for 4 outputsDMX Indication LEDs on in-& outputs3 & 5P XLR outputsSupports Remote Device Management (RDM) Protocol

144,00 €*

Immediately available or ready for collection
DX-1210TE 12 channel LED dimmer pack DMX12 x 10 A
DX-1210TE (12 Channels IGBT/MOSFET Tailing Edge Dimmer)Lite-Puter’s DX-1220 has released for more than 30 years, and it is still very popular and reliable. As LED lighting sources are getting widely adopted, Lite-Puter developed a new trailing-edge sibling to solve the challenge of LED dimming. In addition to trailing-edge output, which is suitable for most LED lamps, the built-in anti-flicker circuits further stabilize the output and minimize the LED shimmering issue.Features- Trailing-edge dimming outputs (fit to most LED lamps)- Built-in active anti-flicker circuit- Minimum brightness level is adjustable- Built-in MCB for each output- Thermal-controlled fan- Self-testing function to test without a consoleSpecificationsProtocol: DMX-512, DC 0-10VDimension: 482(W) x 176(H) x 297(D) mmWeight: 21Kg

2.019,00 €*

Immediately available or ready for collection
Lite Puter DP-24 DMX 512 / 0-10V decoder 24 ch. Multi Exchanger
Features:Convert DMX signal to Analog 0-10V signal.Can set start channel from 1 to 512.Specifications:Power Input: AC 100-240VProtocol: input DMX; output? 0-10VInstallation: 19" 1U standard rackDimension:482(W)* 44 (H) * 225 (D) mmWeight:1.2kg

524,00 €*

Immediately available or ready for collection
Lumidesk Nano MKII
The main innovations of LumiDesk NANO MKII:- HE10 connector for all ports (for remote control / trigger the software)previously only available in the LIVE version and ULTIMATE- Stand-alone operation of the interfaces for sequence 3 control buttons, "+" and "-"previously only available in the Ultimate version- Mini USB port on the interfacepreviously only available in the Ultimate version- Larger memory storage, now 128 channels in live and in stand-alone modenot previously possible- Customization of the DMX signal is possible (frequency, etc.)

199,00 €*

Immediately available or ready for collection
Tip
Wolfmix W1 MK2 DMX Controller
The Wolfmix W1 MK2 is the latest controller from Wolfmix and comes with some exciting new features. It has been specifically designed to create real-time light shows without the need for a computer. The W1 MK2 is targeted at the disco, club, and live performance market and is designed with cues from DJ and electronic music hardware.The latest features in the MK2:New Encoder Knobs: The new, larger encoder knobs provide more precise control over the settings and effects of your lighting system.USB-A Port: The addition of a USB-A port allows you to directly connect a USB memory stick or MIDI controller to the controller. This enhances the flexibility of controlling your light show, and you can import shows directly from a USB stick.The Wolfmix W1 MK2 still offers an impressive toolbox of FX modules, music synchronization, and the ability to control up to 4 DMX universes, equivalent to 2048 channels. You can control lighting for up to 680 fixtures and beams, configure different device types and properties, and utilize many other features to customize your light show.Setup:Standalone operation (no computer required)Compatible with any DMX deviceControl up to 4 DMX universes (2048 channels, add-on required for U3+4)Control up to 680 fixtures & beamsConfigure up to 50 device typesSet up to 5000 device properties (color, gobo, etc.)Use 8 device groupsSupport 6 projectsManage 15000+ available fixtures (3500+ on the controller)Customize DMX addresses, device order, and group settingsUse as a DMX splitter with DMX universe mapping (requires an add-on)Palettes & FX:Color FX module with 8 effect types and 16 customizable colorsMove FX module with 8 effect typesBeam FX module with 8 effect types6 flash buttons for controlling special FX, strobe, blinder, speed, blackout, and smokeStatic color palette with 10 custom colors per group and gradient controlStatic position palette with 5 custom positions per group with fade and fanningGobo palette with 5 customizable gobos per group20 customizable live-edit buttons with flash trigger mode and 'park' function100 customizable presets for saving snapshots with hold and fade timingsPreset playback cue list - all presets or per page of 20 presetsControl & Synchronization:Group and master dimming with encoder accelerationGroup flash, full, and blackout16-bit pan/tilt controlMulti-beam LED bar controlMusic pulse synchronization of FX modules via microphone or line-inBPM synchronization of FX modules with Ableton Link, OS2L, or BPM TAPAdjustment of effect speed, phase, order, size, fade, fan, and flickLive control of move-FX registration pointGlobal FX speed and freeze controlDMX IN mapping with group dimmer and patch to output channels (requires an add-on)WLINK - Synchronization with another Wolfmix controller (requires an add-on)Built-in Tools:Fixture BuilderFixture calibration tool for limiting the range of moving fixturesX-Y touch-controlled positioning gridRGBW touch-controlled color pickerReal-time sequencer with 8 steps for creating beam and move-FXLive view of DMX levels with override of default values and DMX channel testingBeam editor for adjusting the minimum and maximum values for generated effectsOther Nice Features:Calibration and mixing of RGB, white, amber, and UV colors with automatic translation of the fixed color wheelAutomatic matching of similar gobos across different fixture typesTime-triggered activation of flash and preset buttonsFixture FLIP function for reversing the beam orderFixture SPLIT function for splitting multi-FX barsLock the entire controller or lock editing with a passwordProject and fixture backup with the WTOOLS appOffline 3D visualization with Easy View and WTOOLS via USB (requires an add-on)Automatic recovery of the active project (no manual saving required)Import various fixture setups into the same projectStarts up in less than 2 seconds and begins sending DMX in less than 1 secondFactory firmware recovery modePlease note that some of the above-mentioned features require additional purchases available through the WTOOLS app. The Wolfmix W1 MK2 is housed in an ABS plastic case and features a 4.3-inch color TFT screen with tinted glass and capacitive touch screen. It is powered by a 220MHz CPU with an ARM core and has 8MB of RAM and 16MB of flash storage. With its various connectors and powerful capabilities, it provides a comprehensive solution for controlling lighting setups.

777,00 €*

Immediately available or ready for collection
Lite Puter Daylight Sensor for EDX-607
DP-LS01 con detect daylight intensity ans automatically recell scenes of EDX-607 according to illumination (LUX)

82,31 €*

Immediately available or ready for collection
ADJ D4 Branch RM, 4-Way DMX Splitter
The D4 Branch RM™ is a single rack space, 4-way distributor/booster with 3pin and 5pin XLR input and output jacks. This unit takes the incoming DMX signal and splits it to four (4) separate outputs that are electronically isolated from each other to ensure uninterrupted data. In addition, each output has dedicated drivers to boost the incoming signal, and the unit includes a link / terminate button for easy troubleshooting.4-Way DMX Data Splitter / Fully DMX512 (1990) CompliantLink / Terminate Button for Easy TroubleshootingDMX Status LED Indicator(1) 3pin + (1) 5pin XLR Isolated Inputs(1) 3pin + (1) 5pin XLR Passive Loop Output(4) 3pin + (4) 5pin XLR Isolated Outputs

119,00 €*

Immediately available or ready for collection
New
Showtec Easy Fade 36 DMX Controller
The Easy Fade 36 is a new and user-friendly lighting console. It has been specifically designed for applications where users need to operate lights without prior knowledge of DMX and programming, such as in schools, churches, etc.The Easy Fade 36 is a double-preset console with two groups of eighteen channels each. The console can be used either as a double-preset console with eighteen channels or as a single-preset console with thirty-six channels. It features two master faders and one main master.The Easy Fade 36 does not have programming functions, making it easy for any user to operate.Specifications:Control Mode: DMX, ManualDMX Channels: 36Buttons: 20Faders: 41Power Supply: 12 V DCPower Consumption: 6 WPower Input: Low Voltage DC plugDMX Output: XLR 3PWidth (mm): 483 mmDepth (mm): 266 mmHeight (mm): 90 mmWeight: 4.3 kgRack Units: 6 UIP Protection Rating: IP20 (indoor use only)Housing: MetalColor: GrayLED Indicators: SignalMaximum Ambient Temperature: 40°CIncluded Accessories: Adapter

179,00 €*

Immediately available or ready for collection
Battery for Botex T-4 Bar /DC-4 / Light Operator
Battery 3,6V 60 mAh

2,98 €*

Immediately available or ready for collection
Spare Schuko for Lite Puter DX-610 Schuko

8,90 €*

Delivery time from 8 to 10 weeks!
DX-1220D 12 channel dimmer pack DMX12 x 20 A
12 channel dimmer/switch pack. 12 x 20 ampere changeable dimmer channels with automatic protection, "stand alone" function, each channel is dimm- or switchabe and preheat 0-100%. 3 phase connection: 3 x 63A. DMX-512 and analogue 0-10V

1.299,00 €*

Immediately available or ready for collection
DMX splitter din rail
2 CH DMX Signal AmplifierInput voltage DC 12V-DC24VInput DMX signal 1 CH (photoelectricity isolation 1kv)Output DMX signal 2 CH (photoelectricity isolation 1kv)working temperature -30° ~ 65°Dimension L112×W35×H67(mm)Weight (G.W) 135g

89,00 €*

Immediately available or ready for collection
ADJ MyDMX 3.0
ADJ’s myDMX 3.0 is a multi-platform DMX control software/hardware system (Windows and OSX Mac compatible). myDMX 3.0 has a new, robust hardware dongle and exciting new features to take greater command of your lightshow. Out of the package, myDMX 3.0 software will run in limited mode; 512 "Live" DMX channels & 60 "Stand Alone" DMX channels (No 3D visualizer, Easy Remote, 8 port contacts or Midi features). However, these features plus other upgrades, including additional Live & Stand Alone channels can be purchased at https://store.dmxsoft.com/ . myDMX 2.1 and 3.0 interfaces will run in Full mode when running myDMX 2.1 software. If you already own myDMX 2.1 hardware, you can download the myDMX 3.0 software for free from the Downloads tab. Note: it will run in Limited Mode. See above for additional details.Learn more about myDMX 3.0 in this product spotlight: http://tinyurl.com/zz7v6nkJoin the myDMX Facebook group: https://www.facebook.com/groups/MyDMX/Link the myDMX Facebook page for updates: https://www.facebook.com/mydmx/myDMX 3.0 software does not work with myDMX 2.0 hardwareNew Features:Play multiple scenes at a timeArrange scenes into groupsSound-light with BPM audio analysis and pulse analysisLive snapshotsLive scene dimming and scene speed controlsStand Alone backup memoryBPM tapFlash scenesBlind editing - edit scenes without outputting the DMXFully compatible with myDMX 2.1 softwareClassic Features:Easy-to-use DMX software 512 DMX channelsExtensive fixture profile librarySSL2 Profile editor & supportDrag and drop effects generatorWorks with simple scenes/stepsWindows and Mac installers that will download the latest ssl library with an internet connection upon install. Maintenance” application that installs with the program to check for component updates or new versions of the software.Cloud search for profiles” Search for the latest and greatest fixture profiles from within the program itself, no more hunting through dropboxImproved multi Pan and Tilt supportUsers can select multi select steps in a scene and modify a channel parameter without it interfering with the rest of the channels Vast optimizations and stability improvements for both Windows and Mac OSNot compatible with ARM based Windows tablets (only Intel)Additional feature and software upgrades available at https://store.dmxsoft.com/myDMX 3 Upgrades Available (Additional Charge):3D: Design your 3D environment and add 3D objects from the built in 3D object library and create your own virtual venue to program your light show without having to set up your entire rig.MIDI: Use your favorite USB to MIDI device to assign physical buttons and faders to the virtual buttons and faders in the program to get that perfect hardware lighting console feel to your show and playback capabilities.Easy Remote: Using the "Show" function in the program you can quickly and easily build your own Virtual Lighting desk using any DMX channel or preset or Scene in the MyDMX 3 software to get your very own custom Console set up, and it is automatically linked to your smartphone or tablet running the Easy Remote app, there are even presets for popular iOS and Android devices ready to be used and edited!Multiple Universes: If you own a 2nd or 3rd or more MyDMX 3 interfaces, or purchase a MyDMX Buddy with at least the Express mode license for 3.0 software, you can "stack" interfaces to get multiple universes of DMX output on the 3.0 software.8-Port Contacts: Trigger scenes in both live and stand alone mode via the 8 dry contact ports. Bridge the ground pin with pins 1-8 of the HE10 connector to start scenes from a push button or relay. The 8 ports can be combined in binary for up to 255 triggers.Stand Alone: Want to trigger a few of your scenes without lugging your computer around? Stand alone channels let's you do just that. With 60 Stand alone channels included with each MyDMX 3 interface you can store scenes that use up to 60 channels of DMX that you can use to playback lighting looks using the push buttons on the top of the MyDMX 3 interface. you can purchase up to 512 stand alone channels in packs of 50 additional Stand alone channels from the web store.

299,00 €*

delivery time 10 days
DX-401 4 channel dimmer pack DMX
4 x 10 A dimmer DMX (total max 30A), DMX512, 256 steps, LED display, DMX start adresse free selectable, automatic warm-up, XLR 3pol + RJ11telephon jack in/out, pre heat, C3 dimmer curve, mounting bracket for truss or desktop mounting, auto frequence tracking, channel test function, ISO9001, size: 220x220x70mm, weight: 2,5kg

259,00 €*

delivery time 14 days
Tip
Lite Puter DP-81 II DMX SPLITTER 1x Input/ 8x Output, (photo-isolated)
Lite Puter 19" 2U DMX Splitter Panel with 1x Input DMX 5pin XLR male and 8x Output DMX 5pin XLR Female, Dimension:482x44x113mm, Weight:1,16Kg

362,00 €*

Immediately available or ready for collection
CX-1204 12 channel DMX light mixer
12 channel light mixer, 12 channel fader + master, 2x chase , 12 x scene memory, flash buttons on each channel, DMX 512, DMX Kanal 1-6, Out: 1x XLR 3pin, 1x XLR 5pin, 2x phone jack RJ11, audio input 6,3mm jack (max input -10dB 100mV), adjustable audio sensitiviy, incl. 12V/1A DC power supply unitDimension: 380(W) x 53(H) x 186(D) mmWeight: 2.0 Kg

343,00 €*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails