Peripheral Equipments
Here you will find devices, controllers for adjusting and setting the audio signal and other accessories
TOPSELLER
Topseller
dbx DriveRack Venu360
1 199,00 €*
Remote control via own network with Mac, iOS, Android or Windows devices3 Inputs: Analogue or AES6 OutputsRTA microphone connector on the frontAuto EQ function with external RTA measuring microphoneAFS Feedback EliminatorInput module with 31-band graphical EQ, 12-band parametric EQ, subharmonic synthesis, delay and noise gateOutput module with crossover for up to 6-way mono, 12-band auto-EQs, dbx compressors, automatic gain control, subharmonic synthesiser, noise gate, delay (up to 1000 ms per output) and alignment delayXLR input and outputEthernet portUSB portLED chain for each input and outputBody shape: 19"/ 1URTA microphone optional (not included)Tested routers: Dlink 636L, Dlink Cloud router 2000, Cisco / Linksys: WRT54G2V1, Netgear WGR614 v7, Netgear WNR 1000
Immediately available or ready for collection
ARTSplitMix4 Splitter/Mixer
85,00 €*
Splitter / Mixer4-channel passive mixer4 stereo input channelsstereo output (all 6.3 mm jack connectors are stereo -tip, ting, sleeve)Dimensions: 47 x 117 x 104 mm
Immediately available or ready for collection
ART dual PWM limiter
248,00 €*
2-Channel dynamic processorStereo link function of the channelsAdjustable attack and releaseBypass switch per channelGain reduction LED2x Line inputs: XLR and jack, balanced 6.3 mm2x Line outputs: XLR and jack, balanced 6.3 mm2 Loop inputs: 6.3 mm jackDesign: 19" / 1UDimensions (W x H x D): 482.6 x 44.5 x 150 mmWeight: 2.1 kg
delivery time 14 days
DBX 266 XS Stereo-Kompressor/Gate
175,00 €*
DBX 266 XS stereo compressor/gate with integrated PSUOver Easy function (automatic attack and release), Compressor-Ratio "1:1 - 4:1",XLR in/out, -10/+4dB switchablestereo link19", 1U
Immediately available or ready for collection
ART Z-Direct passive DI BOX
42,00 €*
Passive DI BoxFrequency range: 10 Hz -50 kHzTHD: 0.01% Typical @ 1 kHzInput: unbalanced jackInput impedance 50 OhmOutput: XLR maleOutput impedance 600 OhmSwitchable low pass filter -3 dB @ 30 kHzPAD switch (0dB, -20dB, -40dB)Phase switch (normal / invert)Switchable ground liftDimensions: 44.5 x 107 x 89 mmWeight: approx. 340 g
Immediately available or ready for collection
DBX-ZC-8 4-way switch with volume-up-down, wall panel
89,00 €*
4-way source switch- Volume- DBX ZonePro 1260/1261- Suitable for standard wall mountingA panel can be used to control source selection and volume simultaneously. A CAT5 cable with RJ-45 connector is the only necessary connection.
delivery time 14 days
Dbx ZC2 Remote
83,00 €*
DBX DriveRack 260, 220i and ZoneProVolume control and mute switchConnection via Cat 5 cable
delivery time 14 days
QPRO Audio QLM 4.8 Digital loudspeaker controller 4in/8out
1 299,00 €*
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 4 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 8 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 96kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:
Immediately available or ready for collection
dbx AFS2 Feedback Eliminator
489,00 €*
DBX AFS2 digital signal processor for feedback eliminationExtremely fast algorithm detects feedback and corrects them instantlyExtremely narrow notch filters remove a fraction of the frequency spectrumThus, changes of sound are so minimal that they are barely audible24 programmable filters per channelClear display of the set notch filters - 24 LEDs per channel2 operating modes - Fixed Mode and Live ModeUser-friendlyIt is operated via buttons and comfortable knobs Display of all settings on the LCD displayWizard function of AFS2 enables configuration in just a few stepsAlso fully manually adjustableIs connected to the general monitor or between mixer and amplifierIs it possible to grind also on the channel insert of the mixerThe 2 channels of stereo or AFS2 can be operated independentlyDimensions (HxTB): 4,45 x 14,92 x 48,26 cmWeight: 2.04 kg
Immediately available or ready for collection
Linea Research ASC48 FIR Audio Controller
1 990,00 €*
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.
delivery time 7 days
dbx 231S graphic equaliser 2x 31-band
229,00 €*
With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4" inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.Two 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of ±6 or ±12 dB 12dB per octave 50Hz low-cut filter Front panel bypass switch ±12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Internal Toroidal Transformer Frequency Repsonse of 50kHz Dynamic range of greater than 108dB
delivery time 14 days
Denon Pro DN-200BR Stereo Bluetooth® Audio Receiver
129,00 €*
Balanced XLR and 6.3 mm jack outputsUp to 33 m rangeBluetooth receiverSolid high-quality product for installations
Immediately available or ready for collection
Dbx ZC3 4-way source selector switch, wall panel
89,00 €*
A selector switch allows the ZC-3 to switch between the presets of the DR260.With the ZonePro series, the source selection or scene selection can be programmed, the connection is made via a CAT5 cable with RJ-45 connector.for DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box
delivery time 14 days
dbx Crossover 223XS Stereo 2-way
225,00 €*
dbx 223Xs - active Crossover - 2-way stereo or 3-way mono crossover24dB Linkwitz-Rileymono sub out, input/LF/HF gain controlsfactor selection (10x)phase reverse functionswitchable 40Hz HP filterbalanced XLR in/outinternal PSUDimensions: 19"/1U
Immediately available or ready for collection
dbx DriveRack PA2
515,00 €*
DBX DRIVERACK PA2digital speaker management system31 Band grafic equalizerparametric 8-Band input-EQ with auto EQ function, peak stop limitercrossovercompressorsubharmonic synthesizeroutput-delay up to 3,4 m/10 ms,input-delay up to 34 m/100 msfeedback-destroyer with 12x notch-filters 1/80 octaveparametric 8-band output-EQ also for speaker tuningsthird-band real time analyzerpink noise generatorremote control with Mac/Windows/Android/iOS2x XLR input,1x XLRwith 48V phantom power for optional measurement microphone6x XLR male outputsethernet connectorUSB connector19" 1U
Delivery time from 6 to 8 weeks!
ART DTI Dual Transformer/Isolator
82,00 €*
ART DTI Dual Transformer/Isolator - a high quality, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, Input Connections: XLR female balanced, 1/4" TRS, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, 1/4" TRS, unbalanced, and RCA type phono jacks, Dimensions 44.5mm x 107mm x 89mm, Weight 0,34 kg
delivery time 14 days
Linea Research ASC48 FIR Audio Controller with Dante Card
2 790,00 €*
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 and Dante™ / AES67 (option) inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 and Dante™ inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.
delivery time 7 days
ART EQ355 Equalizer
285,00 €*
2-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 2 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg
delivery time 14 days
dbx 286S mic preamp/processor with dynamics
225,00 €*
The dbx 286S is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. The dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4" TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to "loop out" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination.
delivery time 14 days
QPRO Audio QLM 2.4N Digital loudspeaker controller 2in/4out
799,00 €*
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 2 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 4 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 192kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:
Immediately available or ready for collection
