Effect Machines


Effect machines are devices that create a special effect on stage, at an event or in your party room. For example: fog, haze, snow, bubbles or foam, wind and confetti rain. Various effects to heat up the party atmosphere or to create a certain atmosphere in the theater or on the stage... [ More ]

TOPSELLER



Topseller

instant tube connector for Z-380 Antari fazer

€10.90*

Delivery time from 8 to 10 weeks!
Handle with red button for Z-800II

€21.78*

Delivery time from 8 to 10 weeks!
Tank for Antari S-200 / 230V snow machine
Tank für Antari Schneemaschine S-200, SW-250

€15.84*

Immediately available or ready for collection
Air Compressor & Start Capacitor for HZ-500

€768.90*

Immediately available or ready for collection
PC Board for W-510D Antari fog machine
Steuerprint für Antari W-510D Nebelmaschine

€42.90*

Immediately available or ready for collection
Heater for F-5

€171.60*

Immediately available or ready for collection
Heater for F-1

€119.00*

Delivery time from 8 to 10 weeks!
1 kg Paper-Confetti (Confetti size 2 x 6 cm) white
1 kg paper-confettiConfetti size: 2 x 6 cmwhite

€7.20*

Immediately available or ready for collection
Timer Controller for Antari M-10 and M-5
Controller for Antari M10 or M5 Fog Machine

€129.00*

Immediately available or ready for collection
HighPressureValveFogFuryJett/Pro

€25.00*

Immediately available or ready for collection
Hose Clamp for FOG1000 / F1

€5.82*

Immediately available or ready for collection
Heater for ADJ Fury Jett PRO Fogger
Heater for ADJ Fury Jett Pro Fogmachine

€85.00*

Immediately available or ready for collection
Smoke liquid flavour peach
Instruction:Put 1/2 bottle of the smoke liquid flavour into one 5 l can smoke fluid (20ml)

€2.90*

Immediately available or ready for collection
ADJ Fury Jett fogmaschine
The ADJ Fog Fury Jett is a high velocity vertical Fog Machine that mixes color into the fog from 12x 3-Watt LEDs (3 x Red, 3 x Blue, 3 x Green & 3 x Amber). With new advances in ADJ’s heater technology, the Fog Fury Jett produces a dry even blast of fog over 25 feet (7 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts. The Fog Fury Jett may be use vertically or horizontally. The reservoir tank may be mounted in the front or rear of the unit so the machine may be pointed up or down. The ADJ FFJWR wireless remote comes included with the Fog Fury Jett.Features:- 650W professional DMX vertical Fog Machine with 12x 3-Watt LEDs- High performance pump for optimum output- ADJ’s Electronic Thermo Sensing (ETS) technology- Automatic circuit cut-off to protect pump if fog fluid tank runs dry- Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging- 3 Operational modes: Manual, Remote Control, or DMX Controlled- 4 DMX Channels- 4-button control panel & LCD display on rear panel- 3-pin DMX XLR In/Out connections- Convenient carrying handle- Low Fluid Indicator on rear- Warm-up time: 9 min- External fog fluid tank: 3 Liter- Fog Output: 20,000 (cu.ft/min)- Tank can be mounted to either front or rear so that the effect may be pointed up or down- Included Accessory: ADJ FFJWR - wireless remote- Power Connection: IEC AC In- Safety Loop on board - Only use high quality, water-based fog fluid- Light Source: 12x 3-Watt LEDs, (3 Red, 3 Green, 3 Blue & 3 Amber LEDs) - Heater: 650W- Voltage: AC 120V, 230 or 240 50/60Hz (non switching)- Power Consumption: 680W (Full on)- Dimensions (LxWxH): 397 x 302 x 191mm- Weight: 7.1 kg.

€299.00*

Immediately available or ready for collection
Heater for M-7X Antari fog machine
Heater for M-7X Antari fog machine

€279.00*

Immediately available or ready for collection
Smoke Liquid Medium clear 1 l can BLUE LIGHT
Professional smoke fluid for the generation of short, artificial smoke and show effects during events as well as for theatre and film production.The prduct is a safe compound in accordance to EC regulation 1907/2006 (REACH) and EC guidelines EC 67/548/EEC and 1999/45/EC.It is equally as safe regarding national and international transport guidelines for transport across land, sea and air.The raw materials in the product are of the highest level of purity possible.The water included in the product has been distilled twice.Considering the range of vision and the desired effect, the smoke fluid can be dispensed into the air in measurements between 25 and a maximun of 80 mg/m3.It is particularly important to measure out the smoke fluid so as to ensure that all exits and emergency exits are still visible.This also goes for the illumination of escape routes, their markings, stairs, shafts, edges, etc. In order to avoid anxiety, the room where the smoke is being used should never be seald.

€4.20*

Immediately available or ready for collection
Thermoprotect for pump for Z-3000 II
thermal protection for pump for Z-3000 II, Z-1500II, Z-1200II, Z-1020, W-515, W-530, IP-1500, X-310 und X-310PRO, M-5, M-8, M10

€8.81*

Delivery time from 8 to 10 weeks!
Spare liquid tank cap for Antari M-1 fogger

€17.16*

Immediately available or ready for collection
1 kg Paper-Confetti (Confetti size 2 x 6 cm) yellow
1 kg paper confettiConfetti size: 2 x 6 cmyellow

€7.20*

Immediately available or ready for collection
Cloth net for snower

€5.02*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails
We have 3 types of fog machines:

> FOG MACHINES
A fog machine basically consists of a pump that pumps the fog fluid from a container into the heating element. The heating element and a controller. The fog fluid is vaporized in the heating element and powerfully ejected from the nozzle due to the resulting pressure. This can be up to 15m with large fog machines. This creates a haze or a dense fog for each fog liquid.
Fog machines with LED lighting are also new. Coloring the fog can create great effects.
A CO2 effect can also be created with a fog machine by using a CO2 fog fluid.

> FAZER
Basically, the Fazer works like a fog machine. In addition, the Fazer has a fan that distributes the fog output better in the room. Technically, the Fazer is a smooth, continuous, low-output smoke machine. The fazer thus ensures a fine and thin fog, which allows light effects and lasers in particular to shine with great spatial effects.

> HAZER
The hazer (haze generator) is very similar in effect to a fazer. However, it does not create a dense fog that should be visible as an effect, but an almost invisible haze to support the multidimensional effect of the light show, i.e. to make the light rays visible. Hazers atomize the fluid using a compressor. This is done via the compressor using ultrasound, not via the evaporation of a heating element as is the case with the fog machine, which is why a special hazer fluid is also required.

> GROUND FOG MACHINES
In order to keep the fog on the ground, the fog that is emitted must be cooled. This can be done with ground fog machines with ice, dry ice or a cooling unit. The cooled fog stays on the ground longer due to the thermal effect.
Ground fog can also be created with a dry ice machine. Here the chemical reaction of dry ice with hot water is used. Dry ice (-75 C°) is flushed with hot water and thus quickly melted. As a result, the dry ice converts to the CO2 gas state and creates a fog that glides away from the ground.