Trusses are usually made of aluminum and are used to carry payloads or to construct decorative structures. In the event area, they are mainly used on the stage to attach lighting fixtures. The traverse is equipped with a simple plug-in system.
Keep it simple! Global Truss has developed the Silencer, a rubber damper that is simply pushed on to the end of a truss pin to reduce noise when assembling truss structures. The silencer will decrease the volume when hammering truss pins by around 50% whilst dampening the high pitch frequencies significantly. A special rubber blend is being used in production which makes the Silencer flexible yet hard enough to transfer the force of the hammer effectively, and whilst preserving the material of the pin and the copper hammer. The Silencer has been designed to be left on the truss pins, whilst fitted to the truss, providing protection not only to the truss but also the ground it is sitting upon. Another added feature is that it offers added camouflage when silvers pins are used on black truss.reduces noise by halfprotects your hearingprotection of surfaces & materialeasy to handlecompatible with every standard pin
The DT33 series is one of the most popular trussing systems Duratruss has ever produced. The load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended with various standard lengths of 50cm, 75cm ,1m, 1,5m, 2m, 2,5m, 3m, 3,5m, 4m, 4,5m und 5,0 meter (special lengths upon request). Our delivery programm also includes corners, T-branches, angles. Upon request, corners and circles can also be offered to you. Extensive accessories such as hooks, connectors, base plates and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Technical specs:- diametrics main pipe: 50mm- wall thickness: 2 mm- dimensions braces: 20 x 2 mm- material: Aluminium EN-AW 6082 T6 (AlMgSi1)- manufactured according to DIN 4112, DIN 4113-1- delivery includes: 3 cones, 6 steel pins, 6 safety clips- Length: 500mm (without cone)- Width: 290 mm- Height: 257,8 mm- Weight: 2,9 kg
90°, 4m; 1 circle is 4 partsThe DT33 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 3 conical connectors, 6 bolts, 6 splints - Produced according DIN 4112, DIN 4113-11 circle is 4 parts100% compatible with GlobalTruss
DURATRUSS DT 34H Truss is especially developped for Tower 1. The 50x4mm main tube gives the mast section extra strength and makes it capable to lift loads up to 1000kg. Also available in black or any othe RAL color.Main tube 50x4mmBraces 20x2mmAlloy EN-AW 6082 T6 (AlMgSi1)incl. Connector Set100% compatible with GlobalTruss
The DT33 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 3 conical connectors, 6 bolts, 6 splints - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
The DT32 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 2 conical connectors, 4 bolts, 4 splints - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended by the lengths 25cm, 1, 2 and 3 meters as standard. The system also includes corners, t-branches and angles. Further lengths, corners and circles can be offered on request. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Specifications:- Main tube diameter: 50mm- Wall thickness main tube: 2mm- Bracing diameter: 20mm- Wall thickness bracing: 2mm- Alloy: EN-AW 6082 T6 (AlMgSi1)- Connection: conical connectors with bolt and splint- Delivery includes: 4 conical connectors, 8 bolts, 8 splints- Produced according DIN 4112, DIN 4113-1- Dimensions:290 x 290 x 1000 mm (without cone)- Weight: 6,1 kg
PA Tower 1 is a light duty tower with a maximum load capacity of 800kg and a maximum lifting height of 6,6m. It is perfectly suitable for modern PA systems such as compact Line Array systems.
Comfortable Carrier for a safe transport and storage of truss. The 60cm carrier from solid HDPE fits all 29cm trusses (DT 31, DT 32, DT 33 and DT 34 ). It protects your truss from scratches and buckling and extends the life time big enormous. You staple your truss in trucks in a very secure way and save space and costs.100% compatible with GlobalTruss
The DT32 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 2 conical connectors, 4 bolts, 4 splints - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
229,00 €*
delivery time 14 days
TOP MARKEN
This website uses cookies to ensure the best experience possible. More information...
Herzlich willkommen!
Bitte wähle zuerst das gewünschte Lieferland.
Bitte bestätige deine Auswahl.
Alle Preise und Verfügbarkeiten werden entsprechend dem gewählten Lieferland aktualisiert.
