Trusses are usually made of aluminum and are used to carry payloads or to construct decorative structures. In the event area, they are mainly used on the stage to attach lighting fixtures. The traverse is equipped with a simple plug-in system.
Stacking Case for 48 conical truss connectorsMain compartment and small accessory compartment2 supports each for 24 traverse cone adapters and 48 pivotsNon-removable coverInterior upholstered with felt cover (black)High-quality workmanship with 6 mm plywood multilayered gluedAluminum profile frames (22 mm) with rounded edgesChromium plated corners, handles and locksThree-leg, medium-sized steel ball corners2 high-quality butterfly locks (w/o locking function)2 hinged case handlesMaximum load: 25 kg Strength: 6 mm Outside dimensions (WxDxH): approx. 540 x 295 x 245 mm Inside dimensions: Mounting width: approx. 505 mm Mounting height: approx. 250 mm Mounting depth: approx. 205 mm Compartments (WxDxH): 420 x 250 x 205 and 70 x 250 x 205 mm Outer dimensions/corners: approx. 45 mm Weight: approx. 10 kg
Front End Bar. Supports the LED Screen on each side of the LED Support System.Dimensions:Width : 50mmLength: 500mmHeight (without levelling foot): 50mm
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29 cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1 The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.100% compatible with GlobalTruss
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29 cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1 The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.100% compatible with GlobalTruss
DURATRUSS DT 34H Truss is especially developped for Tower 1. The 50x4mm main tube gives the mast section extra strength and makes it capable to lift loads up to 1000kg. Also available in black or any othe RAL color.Main tube 50x4mmBraces 20x2mmAlloy EN-AW 6082 T6 (AlMgSi1)incl. Connector Set100% compatible with GlobalTruss
The DT33 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 3 conical connectors, 6 bolts, 6 splints - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
The DT33 series is one of the most popular trussing systems Duratruss has ever produced. The load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended with various standard lengths of 50cm, 75cm ,1m, 1,5m, 2m, 2,5m, 3m, 3,5m, 4m, 4,5m und 5,0 meter (special lengths upon request). Our delivery programm also includes corners, T-branches, angles. Upon request, corners and circles can also be offered to you. Extensive accessories such as hooks, connectors, base plates and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Technical specs:- diametrics main pipe: 50mm- wall thickness: 2 mm- dimensions braces: 20 x 2 mm- material: Aluminium EN-AW 6082 T6 (AlMgSi1)- manufactured according to DIN 4112, DIN 4113-1- delivery includes: 3 cones, 6 steel pins, 6 safety clips- Length: 4500mm (without cone)- Width: 290 mm- Height: 257,8 mm- Weight: 15,7 kg
DURATRUSS DT 34H Truss is especially developped for Tower 1. The 50x4mm main tube gives the mast section extra strength and makes it capable to lift loads up to 1000kg. Also available in black or any othe RAL color.Main tube 50x4mmBraces 20x2mmAlloy EN-AW 6082 T6 (AlMgSi1)incl. Connector Set100% compatible with GlobalTruss
The DURATRUSS DT44/3 System is a 4-point truss system that is connected with four conical connectors, bolts and locking pins. The advantage of the quick connector system is that it closes with a force-fit connection with the belt tube and enables quick assembly with frequent assembly and disassembly. The four belt tubes are made of 50mm aluminum tube with 3mm wall thickness and give this system an excellent weight-load capacity ratio. The braces have a diameter of 25mm and a wall thickness of 3mm. The system can optionally be expanded as required. Corners, T-branches, angles, and circles are available. An extensive range of accessories from hooks, connectors, floor plates, wall brackets, spacers and much more round off the delivery program. The system, made in Europe, is of course TÜV certified.Strengths of the truss system: • High quality aluminum tubes with 50mm diameter • Easy installation • Low weight • Space-saving transport • For exhibition stand construction and event technologySpecifications:• Main Tube: 50 x 3 mm • Braces: 25 x 3mm• Alloy: EN-AW 6082 T6 (AlMgSi1)• Manufactured according DIN 4112, DIN 4113-1• Coupling System: Concial connector with bolt and locking pin Dimension and weight:• Lenght: 1500 mm (without connector)• Width: 400 mm • Height: 400 mm• Weight: 13,4 kgDelivery including connector set, consisting of: 4 conical connectors, 8 bolts and 8 locking pins.
The DT32 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 2 conical connectors, 4 bolts, 4 splints - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
This LED Support Steel Base from DuraTruss serves as a base unit for all Duratruss LED Support Systems. The optionally available DT 32/3 2-point trusses are attached to this base unit. The system can be extended up to a maximum of 6 meters width. The three integrated spindles are used to level ground unevenness. Please note that the LED Support Steel Base must be ballasted accordingly. Use our DT Universal Sandbag 12kg in appropriate quantities!Specifications:- Black powder-coated steel base- Compatible with all Duratruss LED Support Systems- Connector: Conical connector with steel pin and safty clip.- 3 adjustable levveling feet Dimensions and weight:- Length: 1200 mm - width: 294mm- height: 50mm (without feet and half-connectors)- weight: 10,4 kg Delivery includes two half-cone connectors.
After being filled with sand or gravel, the sandbag can be positioned on a tripod leg or cross brace to secures the tripod against falling. It is made of a very robust material and has a handle and two hooks.Measures and weight:Dimensions: 37 x 12 cmWeight: including sand 12 kgDelivery takes place without filling!
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29 cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 3mm wall thickness. The bracing have a diameter of 20mm and 2mm wall thickness.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 3mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1 The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.100% compatible with GlobalTruss
949,00 €*
delivery time 14 days
TOP MARKEN
This website uses cookies to ensure the best experience possible. More information...
Herzlich willkommen!
Bitte wähle zuerst das gewünschte Lieferland.
Bitte bestätige deine Auswahl.
Alle Preise und Verfügbarkeiten werden entsprechend dem gewählten Lieferland aktualisiert.
