Pin NA314L for Truss adapter CL-021 (ATCMOS)

DuraTruss DT34/2/B-C21-L90 - 2-way-corner 90° matt blackThe DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended by the lengths 50cm, 1, 2 and 3 meters as standard. The system also includes corners, t-branches and angles. Further lengths, corners and circles can be offered on request. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Technical specs:- Diametrics main pipe: 50mm - Wall thickness: 2 mm - Material: Aluminium EN-AW 6082 T6 (AlMgSi1)- Dimensions braces: 20 x 2 mm - Included in delivery: 4 cones, 8 steel pins, 8 safety clips- Length: 500 mm (without cone)- Width: 500 mm - Height: 290 mm- Weight: 4,9 kg

For Vienna/Austrian mouthpieces.This reed responds very well in all registers and creates a clear and brilliant tone; perfect balance between sensitive tip and reed shoulder.Not only because of enviromental reasons, but due to his conviction Peter Leuthner puts his focus fully on cane. Only a perfectly manufactured reed made from this natural material allows to savour to the full the entire sound spectrum of artistically played music - according to the motto: living material for lively music and a maximum of sound quality.The reeds are produced on specially developed computercontrolled machines based on traditional French technology of reed manufacturing and processing. They allow a precise cut of the reed, exact measurement of its elasticity and the subsequent sorting of the reeds by half strengths.Since each naturally grown piece of cane has its individual characteristics, even at these high technological standards no reed resembles the other at a hundred percent!Finally, the manufactured reeds are subjected to strict quality control and may be reworked to meet all artistic demands. In a unique way Vienna´s tradition of reed manufacturing is thus combined with state of the art technology.