Peripheral Equipments
Here you will find devices, controllers for adjusting and setting the audio signal and other accessories
TOPSELLER
Topseller
ART active Xdirect Di box
59,00 €*
Active DI BoxFrequency range: 10 Hz –100kHzMax. output level: +6 dBu (battery powered) / +14 dBu (phantom powered)Max. input level: +4/+24/+44 dBuDynamic range: > 100 dBInput: Jack and XLR femaleInput impedance 470 OhmOutput: XLR maleOutput impedance
delivery time 14 days
ART dual X direct active di box
77,00 €*
ART Dualxdirect Active Dual DI Box - fully active design, 18-48V phantom powered or 9V battery powered, converts high-impedance balanced/unbalanced inputs into 600 Ohms balanced outputs, switchable input attenuation (0, -30dB), switchable ground lift, 1/4" TRS/XLR combo connector inputs, balanced XLR outputs, rugged extruded aluminium case. Frequency response: 10Hz-100kHz ± 0.5dB @ +0dBu. THD: 100dB (typical). Channel separation: > 80dB (typical). Maximum input level: +4, +34dBu. Maximum output level: +6dBu (battery powered), +14dBu (phantom powered). Input connections: 1/4" TRS/XLR female balanced/unbalanced (x2), 470k Ohms. Thru connections: 1/4" TRS (2). Output connections: XLR male balanced (x2), < 600 Ohms. Input Attenuation: Switchable, (0, -30 dB), Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel), Dimensions: 99 x 117 x 47mm. Weight: 0.38kg
delivery time 14 days
Linea Research ASC48 FIR Audio Controller with Dante Card
2 790,00 €*
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 and Dante™ / AES67 (option) inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 and Dante™ inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.
delivery time 7 days
RTA-M dbx linear measurement microphone for DriveRacks
137,80 €*
DBX DRIVERACK RTA-Mmeasurement microphone for dbx Driverack, Polar Pattern : omni-directional, back electret-Condenser, Frequency range: 20 - 20.000 HzImpedance : 250 30% (at 1,000Hz)Sensitivity : -63 dB +-3 dB ( 0 dB=1V/ microbar 1,000 Hz indicated by open circuit )9-52 V Phantompower necessaryincl. clamp and case
delivery time 14 days
ART EQ355 Equalizer
285,00 €*
2-channel 31-band graphic equalizer with additional adjustable high and low pass filtersPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm frequency band slider with center detentGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls: power switch, filter area L / R switch, bypass L / R switch, L / R level control, ground lift switchFilter type: constant Q factor, center frequency accuracy 3%Frequency bands: 2 x 31, 1/3 octave, according to ISO standardMaximum gain / reduction: adjustable, ± 6 dB or ± 12 dBTravel of the slider: 20 mm with center catchAdjustable high pass filter: 10 Hz to 250 Hz, 12 dB / octave in each channelAdjustable low-pass filter: 3 kHz to 40 kHz, 12 dB / octave in each channelIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range: 20 Hz - 20 kHz, ± 0.5 dBExternal voltage difference: 94 dBDistortion (THD): 0.01%Channel spacing:> 50 dBInputs / Outputs: XLR and 6.3 mm jack (active, balanced), cinch (unbalanced)Maximum input level: +22 dBmInput impedance: 20kOhm (balanced), 15kOhm (unbalanced)Maximum output level: +18 dBm (balanced), +22 dBm (unbalanced)Output impedance: 150 ohmsPower supply: adjustable, 95 - 130 V AC, 50/60 HzPower consumption: 22 VADimensions (W x H x D): 483 mm x 89 mm x 216 mmWeight: 4.1 kg
delivery time 14 days
LH-053 DI-Box passive
21,00 €*
Passive DI box1 high-impedance signal input, 6.3 mm jack1 low-impedance XLR output1 instrument feed-through output, 6.3 mm jackConverts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dBGround-lift switch eliminates signal interference and ground loop problemsRugged black metal housingFrequency range: 15 Hz - 30 kHz Input impedance: 50 kohms Output impedance: 600 ohms S/N ratio: >95 dB Input connector: 6.3 mm jack, unbal. Output connectors: XLR, bal. 6.3 mm jack, unbal. (parallel out) Dimensions: 127 x 74 x 45 mm Weight: 430 g
delivery time 14 days
DBX-ZC-8 4-way switch with volume-up-down, wall panel
89,00 €*
4-way source switch- Volume- DBX ZonePro 1260/1261- Suitable for standard wall mountingA panel can be used to control source selection and volume simultaneously. A CAT5 cable with RJ-45 connector is the only necessary connection.
delivery time 14 days
ART DTI Dual Transformer/Isolator
82,00 €*
ART DTI Dual Transformer/Isolator - a high quality, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, Input Connections: XLR female balanced, 1/4" TRS, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, 1/4" TRS, unbalanced, and RCA type phono jacks, Dimensions 44.5mm x 107mm x 89mm, Weight 0,34 kg
delivery time 14 days
LH-051 Dual phantom power adapter
76,20 €*
LH-051 Omnitronic Dual phantom power adapter Phantom power for 2 microphonesPhantom power supply for condenser or electret microphones Selectable +12/ +48 V power supplyIdeal accessory for mixers without phantom powerInputs and outputs via balanced XLR connectorsOperation via 2 x 9 V block battery or power unit (not included)Power supply: 12 V DC or 2 x 9 V blockOutput voltage: +12 V/ +48 V DC, ±2 V DCInput impedance: 600 ohmsOutput impedance: 600 ohmsDimensions: 143 x 93 x 45 mmWeight: 485 g
delivery time 14 days
Omnitronic LH-045 microphone preamplifier
76,20 €*
OMNITRONIC LH-045 Microphone 1-channel preamplifier 1 microphone, XLR (bal.) or 6.3 mm jack (unbal.) Gain control, 10 steps (6-50 dB) Phantom power can be switched on Clip LED 1 line output, XLR (bal.) or 6.3 mm (unbal.) Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedance: 10 kohms bal./unbal. Max. input level: +4 dB bal./+10 dB unbal. Gain: 50 dB XLR/44 dB jack T.H.D.: 0.01 % Frequency range: 25 Hz - 16 kHz S/N ratio: >75 dB Dimensions: 143 x 93 x 45 mm Weight: 350 g
delivery time 14 days
Dbx ZC3 4-way source selector switch, wall panel
89,00 €*
A selector switch allows the ZC-3 to switch between the presets of the DR260.With the ZonePro series, the source selection or scene selection can be programmed, the connection is made via a CAT5 cable with RJ-45 connector.for DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box
delivery time 14 days
DBX Zonenmix-Matrix-Sytem, 12x In, 6x Out
1 199,00 €*
Audio matrix with 12x single, 6x off and 2x mic / line inputs- Advanced Feedback Suppression (AFS).- Autowarmth.- Auto Gain Control.- Classic dbx compression.- Limiter.The dbx ZonePRO 1260 is a universal problem solution for flexible sound reinforcement concepts in the installation area. The matrix is based on a total of 12x mono inputs (symmetrical microphone / line, 16x unbalanced line / monosummed and digital S / PDIF) and 6x outputs (all symmetrical line ). The very powerful DSP processor provides EQ, routing, dynamics and delay for each channel. In addition, an integrated feedback suppressor can be assigned to the microphone inputs. Media controllers can access all parameters via the serial or Ethernet interface. A wide selection of wall panels (for installation in switch sockets) allows remote access to level, program or complete presets in the various zones.
delivery time 14 days
dbx DriveRack PA2
515,00 €*
DBX DRIVERACK PA2digital speaker management system31 Band grafic equalizerparametric 8-Band input-EQ with auto EQ function, peak stop limitercrossovercompressorsubharmonic synthesizeroutput-delay up to 3,4 m/10 ms,input-delay up to 34 m/100 msfeedback-destroyer with 12x notch-filters 1/80 octaveparametric 8-band output-EQ also for speaker tuningsthird-band real time analyzerpink noise generatorremote control with Mac/Windows/Android/iOS2x XLR input,1x XLRwith 48V phantom power for optional measurement microphone6x XLR male outputsethernet connectorUSB connector19" 1U
Delivery time from 6 to 8 weeks!
ART DPDB dual passive direct BOX
68,00 €*
736/5000Passive DI boxThe dPDB Passive DI Box has two high-quality DI boxes in a portable housing. It is used for balancing unsymmetrical signals e.g. from line instruments such as bass, guitar or keyboards. It converts the high-impedance signals of the instruments into low-impedance balanced signals, which are necessary for mixing consoles. The dPDB has a switchable input attenuation (0dB, -20dB, -40dB), a 50k Ohm instrument input, a 50k Ohm parallel link socket, a 600 Ohm XLR output and a switchable ground lift.Characteristics:• Frequency response: 10 Hz - 50 kHz +/- 0.5dB @ + 4dBu• Connectors: 600 Ohm XLR Output Jack• Ground Lift Switchable• Input Sensitivity: Switchable (0dB, -20dB, -40dB)
delivery time 14 days
ART EQ341 Equalizer
159,00 €*
2-channel 15-band graphic equalizerPrecise filters with constant Q-factorBalanced XLR inputs and outputs, active balanced jack inputs and outputs, and unbalanced RCA inputs and outputsInput level control, override indicator and bypass switch with LED indication in each channelLevel adjustment by ± 6 dB or ± 12 dB20 mm slider with center catchGround Lift SwitchBuilt-in power supply with selectable supply voltageRobust all-metal designDeveloped for years of reliable continuous useTechnical specifications:Controls Power switch, L / R control range switch, L / R bypass switch, L / R level control, Ground Lift switchFilter type constant Q-factor, center frequency accuracy 3%Frequency bands 2 x 15, 2/3 octave, according to ISO standardMaximum amplification / reduction adjustable, ± 6 dB or ± 12 dBTravel of the slider 20 mm with center catchIndicators Displays for control range (6dB / 12dB), bypass and override indicatorsFrequency range 20 Hz? 20 kHz, ± 0.5 dBExternal voltage difference 94 dBDistortion (THD) 0.01%Channel distance> 50 dBInputs / outputs XLR and 6.3 mm jack (active, symmetrical), cinch (unbalanced)Maximum input level +22 dBmInput impedance 20 kOhm (symmetrical), 15 kOhm (unbalanced)Maximum output level +18 dBm (balanced), +22 dBm (unbalanced)Output impedance
delivery time 14 days
dbx CT3 Advance Cable Tester
205,00 €*
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.Recommended for: Studio, Tour, Portable. FeaturesTests up to 8-pin cables2 piece chassis for testing installed cablesTest Tone GeneratorAllows connection between different format connectors with ease‘Banana’ connector continuity tester with beeper and LED indicatorSuper-rugged construction for durability and longer life(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections(2) BNC connectors for testing of 2 pin->to pin connections(2) RCA Phono connectors for testing of 2 pin->to pin connections(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections(2) Speaker Twist connectors for testing of 4 pin->to pin connections(2) Banana connectors for testing of 1 pin->to pin connections(2) 1/4" (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections(2) RJ45 connectors for testing of 8P8C modular connections(2) 1/8" (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections
delivery time 14 days
dbx 231S graphic equaliser 2x 31-band
229,00 €*
With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4" inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.Two 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of ±6 or ±12 dB 12dB per octave 50Hz low-cut filter Front panel bypass switch ±12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Internal Toroidal Transformer Frequency Repsonse of 50kHz Dynamic range of greater than 108dB
delivery time 14 days
dbx 286S mic preamp/processor with dynamics
225,00 €*
The dbx 286S is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. The dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic "in your face" vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.The dbx 286s offers a full compliment of metering and status LEDs to visually guide you to achieving the right sound. The floating balanced XLR Mic Input accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4" TRS Line Input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mixdown. Use the Insert jack to interface between the Mic Preamp and the signal processing sections to "loop out" to external processors (such as EQ or delay unit) or to mix the Mic Preamp's signal out to an external destination.
delivery time 14 days
dbx DriveRack 4820
3 759,00 €*
48 and 96 kHz operationColor QVGA Display4 analog and AES/EBU inputs8 analog and AES/EBU outputsOptional CobraNet I/OOptional Jensen® I/O TransformersFull Bandpass Filter, Crossover andRouting Configurations with Bessel,Butterworth, and Linkwitz-Riley filters31-Band Graphic and 9-bandParametric EQ on every input6-band Parametric EQ on every outputLoudspeaker Cluster and DriverAlignment DelaysSelectable DSP inserts on all inputsand outputs including Classic dbxCompression, Limiting and AdvancedFeedback Suppression among othersEthernet networking controldbx ZC wall panel control
delivery time 14 days
dbx AFS2 Feedback Eliminator
449,00 €*
DBX AFS2 digital signal processor for feedback eliminationExtremely fast algorithm detects feedback and corrects them instantlyExtremely narrow notch filters remove a fraction of the frequency spectrumThus, changes of sound are so minimal that they are barely audible24 programmable filters per channelClear display of the set notch filters - 24 LEDs per channel2 operating modes - Fixed Mode and Live ModeUser-friendlyIt is operated via buttons and comfortable knobs Display of all settings on the LCD displayWizard function of AFS2 enables configuration in just a few stepsAlso fully manually adjustableIs connected to the general monitor or between mixer and amplifierIs it possible to grind also on the channel insert of the mixerThe 2 channels of stereo or AFS2 can be operated independentlyDimensions (HxTB): 4,45 x 14,92 x 48,26 cmWeight: 2.04 kg
delivery time 14 days
