Trusses are usually made of aluminum and are used to carry payloads or to construct decorative structures. In the event area, they are mainly used on the stage to attach lighting fixtures. The traverse is equipped with a simple plug-in system.
The DT34 series is one of the most popular trussing systems duratruss has ever produced. The high load capacity combined with a very low weight are the features of this 29cm series with conical coupler. The advantage of the quick connector system lies in the fact that it closes force-locking the belt tube and allows rapid assembly and dismantling. The four tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength -to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2 mm. The system also includes cones, steel pins and safety clips.The matt black coated version can be extended by the lengths 25cm, 1, 2 and 3 meters as standard. The system also includes corners, t-branches and angles. Further lengths, corners and circles can be offered on request. Extensive accessories such as hooks, connectors, base plates, wall mounts, spacers and much more solutions will complete the product range.The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Specifications:- Main tube diameter: 50mm- Wall thickness main tube: 2mm- Bracing diameter: 20mm- Wall thickness bracing: 2mm- Alloy: EN-AW 6082 T6 (AlMgSi1)- Connection: conical connectors with bolt and splint- Delivery includes: 4 conical connectors, 8 bolts, 8 splints- Produced according DIN 4112, DIN 4113-1- Dimensions:290 x 290 x 290 mm (without cone)- Weight: 2,7 kg
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-11000 x 1000 mm - 60 °100% compatible with GlobalTruss
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29 cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 3mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 3mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1 T6) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1 The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.100% compatible with GlobalTruss
The DT 14 boxcorner (UJB) is built as angle adapter for the DT 14 truss system. It allows junctions in 90° angles in all directions. The boxcorner is delivered 2 side equipped (8 conical, half connectors, 8 steel pins, 8 security clips)100% compatible with GlobalTruss
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss
The DT32/3 LED Support is a 2-point ladder truss for the DuraTruss LED Support System, which is connected with two conical connectors, bolt and cotter pin. The advantage of the quick connector system is that it is force-fitted to the main tube (also known as the support tube or main tube) and allows for quick assembly with frequent assembly and disassembly.The two belt tubes are made of 50 mm aluminum tube with a wall thickness of 3 mm and give this system an excellent weight-to-load ratio. The struts have a diameter of 30 mm with a wall thickness of 3 mm.Specifications:• Pipe diameter main pipe: 50mm• Wall thickness support tube: 3mm• Strut diameter: 30mm• Wall thickness struts: 3mm• Alloy: EN-AW 6082 T6 (AlMgSi1)• Manufactured according to DIN 4112, DIN 4113-1• Connectors: conical connectors with bolts and cotter pin• Colour: Coated Black (RAL9005)Measures and weight:• Length: 500 mm (without connector)• Width: 290mm• Height: 50mmDelivery including connector set, consisting of: 2 conical connectors, 4 bolts and 4 safety pins.