power supply for Dummy battery for Antari M1-Mobilfogger

Product information "power supply for Dummy battery for Antari M1-Mobilfogger"

Power Supply for Dummy battery for Antari M1-Mobilfogger

Manufacturer "Antari"
Antari fog machines and effects units!
A snow and foam machine must be flushed with pure water after each operation to prevent the fluid from caking. The same is to be done with bubble machines, as the fluid sticks when drying the machine and the slats.Antari fog machines are in use on large stages, theaters, musicals, showmen, open air arenas to DJ and small parties, but also in firefighters training or on film sets. Antari has the right fog machine for every job.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Remo Drum Head 8" Diplomat Clear
Remo 8 " Diplomat ClearThe Clear Diplomat® is Remo’s brightest, most open sounding head due to its single layer of 7.5-mil Mylar® film. They’re known for their bright tones, resonance, and sustain and as resonant (bottom) heads opening up the sound of tom-toms.

19,90 €*

delivery time 14 days
Color sheet 152 pale gold
Lee Farbfilter BogenMaße: 122 x 51 cm

11,90 €*

Immediately available or ready for collection
Meinl MC-R2, Rod straight
Meinl MC -R1Rod straightThis rod can hold tambourines, cowbells, chimes, blocks and cymbals.Material: chrome plated steelKnurled face

8,90 €*

delivery time 14 days
DURATRUSS DT 33-100 3-Point Truss straight 100cm
The DT33 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 3 conical connectors, 6 bolts, 6 splints - Produced according DIN 4112, DIN 4113-1100% compatible with GlobalTruss

182,00 €*

delivery time 14 days
Sea Drum
This sounds like sea!It also can be used wunderfully as rattle.Size: 18 cm diameterfrom 12 months

14,95 €*

delivery time 14 days
Shure SBC203 2-slot charging station for SB903 lithium-ion batteries
The 2-slot charging station charges two SB903 lithium-ion batteries. The transmitters can also be plugged directly into the charger so that the batteries can be charged via the external contacts. Designed to charge two batteries, two bodypack transmitters, two handheld transmitters or any combination.for 2 SB903 batteries and/or SLXD1 or SLXD2Dimensions (HxWxL): 66 x 99 x 165 mmWeight: 284gincl. EU power supply

145,00 €*

delivery time 14 days
10 m extension cable XLR 5 pol. male/female

15,96 €*

Immediately available or ready for collection
Tank for Antari W-508

9,90 €*

Immediately available or ready for collection
Battey clip for 9-Volt Battery, vertical

0,50 €*

Delivery time from 8 to 10 weeks!
Temperature fuse C15Z10-H

4,09 €*

Delivery time from 8 to 10 weeks!
Fan Group for Antari F-3

198,00 €*

Immediately available or ready for collection
3 Phase switch for AF-5

40,66 €*

Immediately available or ready for collection