Auto Lock guitar strap black made of soft nylon fabric, adjustable from 76 - 140 cmWidth: 5 cmThe Auto Lock guitar strap from D'Addario convinces with an extremely simple integrated safety lock. Simply slide the end of the belt over the belt buttons - that's it. The gray lock is tensioned with a spring. In this way, it automatically locks into the belt button and holds for as long as you want. If you press the gray fastener and slide the end down, the strap is released again. Is compatible with most conventional strap buttons. The Auto Lock guitar strap was developed in collaboration with Ned Steinberger.
The ADJ Encore LP7IP is a versatile, heavy duty Par with seven (7) 20W Quad LEDs (4-IN-1: Red, Green, Blue & Lime), a 10-degree beam angle, and all metal construction. It is IP65 outdoor rated to protect against, rain, snow and dust for temporary outdoor events. It offers flicker free operation for TV and film and linear white color temperature control from 2700K - 6500K. The ADJ Encore LP7IP is a versatile IP65 outdoor rated Par with 7 x 20-Watt (4-IN-1: Red, Green, Blue & Lime) Quad LEDs. With a 10-degree beam angle, users may produce wide washes with smooth color mixing from 64 built-in color macros utilizing red, green, blue and lime LEDs. Not only is this LED Par great for lighting indoor stages and venues, but with its IP65 rating, it’s a great solution for temporary outdoor lighting of stages or events. The IP65 rating helps protect the fixture from rain, snow and dust. The fixture’s Quad LED engine offers flicker free operation for TV and film and linear white color temperature control from 2700K - 6500K. The Encore LP7IP professional features include: 6 DMX modes, 5 operational modes, 6 selectable dimming modes, 4 selectable dimming curves, and a 4-Button DMX menu with digital display. The unit is equipped with outdoor Locking Power connectors and IP rated 5-pin DMX rubber covers and connectors. IP rated power linking and DMX cables are available, but standard 5-pin DMX cables may also be used for indoor applications. There are several additional frost filter options that customize the beam angle. These filter snap into the front of the fixture and are sold separately. SOURCE:Light Source: 7 x 20-Watt Quad RGBL LEDs (4-IN-1: Red, Green, Blue & Lime) PHOTMETRIC DATA:Beam angle: 10-degreesCRI: 84CRI R9: 76.6Lumens: 2500 EFFECTS:Linear Color Temperature Control (2700K to 6500K)Preset Color Temperatures (2700K, 3200K, 4000K, 5600K and 6500K)16-Bit Fine Color Control (Red, Green, Blue & Lime)64 built-in Color Macros CONTROL / CONNECTIONS:4-button, DMX digital display on rear panel5 Operational modes: Static Color Mode, RGBL Dimmer Mode, Program Mode, Sound Active Mode and DMX ControlledSupports RDM (Remote Device Management)With Wired Digital Communication Network6 selectable Dimming Modes (Standard, Stage, TV, Architectural, Theatre & Stage 2)4 selectable Dim Curves (Linear, Square Inv. Square, S-Curve)Adjustable Refresh Rate (14 presets from 900 – 25,000Hz) Flicker Free operation (No flickering on camera)LED pulse and strobe effect Electronic Dimming: 0 - 100% 6 DMX Modes: 4, 7, 8, 10, 13 & 16-channel Quiet fan mode CONSTRUCTION:IP65 Rated: Ingress Protection against liquid, snow, dust and sandAll metal constructionIP Rated rubber covers protect In/Out Locking Power connectors and IP rated 5-pin socketsLocking, outdoor IN/Out Power connectorsData linkable via 5-pin DMX connectionsIncludes Lens kit with 4 different beam anglesScissor Yoke with Quick Locks & safety eyeOptional Omega bracket available ELECTRICAL / THERMAL:Multi-voltage operation: AC 100-240V, 47/63HzDaisy chain: 20 @ 220VMax power: 103W DIMENSIONS / WEIGHT:Dimensions (LxWxH): 220x160x242mmWeight: 3.45 kg.
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.The system from European production is compatible to the most common systems in the market and self-evident TÜV approved.Specifications:- Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: Connector Set - Produced according DIN 4112, DIN 4113-1500 x 500 x 500 mm 100% compatible with GlobalTruss
