Half coupler black for 48-51mm tuber, 50 mm widthmax. tensile load:500 kgmax. shear load l: 100 kglock screw M12 wingnutwith M 10 screw with nut snapring and washerTÜV certified
High load clamp for heavy truss DT 54/4 & 74/4 with 50mm main pipe and many further applications for pipe with 48-51mm diametric.Technical specs:- Delivery includes: Coupler with screw M12, washer & selflocking nut- For truss pipes from 48-51mm diametric- Material: Aluminium 6061 T6- Device screw: M12 x 40mm- Colour: aluminium- Max. load/SWL: 750kg- Dimensions: 85,4 x 50,0 mm (without screw)- Weight: 0,62kg
DT Jr Stainless Steel Clamp 75kgSuitable for trusses with a 35mm tube diameter. This stainless truss clamp is designed for a maximum load of 75kg.Specifications:Delivery consists of: DT Jr Clamp 75kgSuitable for trusses with a diameter of 32-35mmMaterial Clamp upper and lower part: aluminum 6061 T6, all screws, wing nuts and axes: stainless steelDevice screw: M10 x 30Color: aluminumMax.load/SWL: 75kgDimensions (width x height): 57.6 x 30.0 mm (without device screw)Weight: 0.134kg
The ADJ O Slim 2 Clamp is designed to fit in-between the “V” shaped truss braces where larger size clamps will not fit. It can also be used like a traditional ADJ O-Clamp to hang smaller fixtures under 10 kg. The O Slim 2, like the ADJ O-Clamp, wraps around the entire2-inch truss pipe to avoid scuffing, scratching and denting of truss.- Slim O-Clamps for 2" Truss. - Slim design makes it easier for mounting the perfect position on truss- Fits in-between the diagonal truss braces- 360 degree clamp that wraps around truss tubing- Non scuffing - Non scratching - Non scoring - Non denting- Weight limit: 10 kg.
Small high load clamp in aluminium for several applications for touring and installation.Technical specs:- Delivery includes: Coupler with screw M12m, washer & selflocking nut- For truss pipes from 48-51mm diametric- Material: Aluminium 6061 T6- Device screw: M12 x 40mm- Colour: aluminium- Max. load/SWL: 500kg- Dimensions: 85,4 x 30,0 mm (without wing screw and wing)- Weight: 0,450kg
The Avenger C345-1 Barrel Clamp in silver is made with gravity cast aluminium, has a built in 28 mm/ 1 1/8 inch junior receiver, a 16 mm/ 5/8 inch baby pin with a 1/4'' threaded top and a 16 mm/5/8 inch receiver. This barrel clamp is capable of mounting pipes or tubes ranging from 42 - 52 mm/1.65 - 2.05 inch and easily locks into place with the wingnut. The baby attachment can support loads up to 40 kg/88.2 lb while the junior receiver can take capacities up to 300 kg/661.4 lb. The C345-1 includes a safety cable with locking pin to secure attachments that are mounted in the junior receiver. TÜV SÜD certified. Recommended Accessories: C155, C155-01, C155-02 E200, FF3276, A2029, C590, C626, C590SpecificationsWeight: 0.9 kgAttachment 01: 1 1/8" (28mm) socket - Payload 300 Kg, 5/8" (16mm) socket - Payload 40 Kg, 5/8" (16mm) stud - Payload 40 KgLength: 3 cmCertification: TUVClamp Range - Max. (Round Tube): 52 mmClamp Range Min Round Tube: 42 mmColour: SilverMaterial: Aluminium
Small high load clamp in aluminium for several applications for touring and installation.Technical specs:- Coupler with screw M12m, washer & selflocking nut- For truss pipes from 48-51mm diametric- Material: Aluminium 6061 T6- Device screw: M12 x 40mm- Colour: Black- Max. load/SWL: 500kg- Dimensions: 85,4 x 30,0 mm (without wing screw and wing)- Weight: 0,450kg
Halfcoupler for trusses with a main tube diameter of 48-51mm.The maximum load for this stainless steel truss clamp is 100kg.Specifications:Suitable for trusses with a diameter of 48-51mmMaterial Clamp upper and lower part: aluminum 6061 T6, all screws, wing nuts and axes: stainless steelDevice screw: M10 x 35Color: aluminumMax.load/SWL: 100kgMeasures and weight:Dimensions (width x height): 67.8 x 30.0 mm (without device screw)Weight: 0.156kg
The DURATRUSS Pro Studio Clamp was developed for the simple attachment of spotlights with 28mm spigots to trusses. The 28 mm holder is equipped with a safety clip and thus increases the safety against falling, even when the screw is open. In addition, there is a 16mm spigot with 3/8 thread for the acceptance of further accessories.Specifications:Suitable for trusses with a diameter of 48-51mm28mm spigot mount16mm spigot with 3/8 threadMaterial: aluminum 6061 T6Color: blackMax. Load / SWL: 300kg (28mm); 40kg (16mm)Dimensions: LxWxH 175 x 63 x 120mmWeight: 0,87Kg
Duratruss DT Jr Clamp Black with big wing nut- For truss pipes from 32-35mm diametric- Material: Aluminium 6061 T6- Device screw: M10x30- Colour: RAL 9005 matt black- Max. load/SWL: 75kg- Dimensions: 53,6 x 30,0 mm (without screw)- Weight: 0,165kg
€8.20*
Immediately available or ready for collection
This website uses cookies to ensure the best experience possible. More information...
Warm welcome!
Please select the desired delivery country first.
Please confirm your selection.
All prices and availability are updated according to the selected delivery country.