Sock for foam machine

Product information "Sock for foam machine"

[Dimension]

Width: 78 mm

Lenght: 154 mm

For mounting on diameter approx. 50 mm

Manufacturer "Antari"
Antari fog machines and effects units!
A snow and foam machine must be flushed with pure water after each operation to prevent the fluid from caking. The same is to be done with bubble machines, as the fluid sticks when drying the machine and the slats.Antari fog machines are in use on large stages, theaters, musicals, showmen, open air arenas to DJ and small parties, but also in firefighters training or on film sets. Antari has the right fog machine for every job.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


DURATRUSS DT 32-075 2-Point Truss straight 075 cm
DuraTruss DT 32/2-075 The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line. The system is from European production which is compatible to the most common systems in the market and is TÜV approved.Technical specs:- Diametrics main pipe: 50mm - Wall thickness: 2 m- Dimensions braces: 20 x 2 mm- Material: Aluminium EN-AW 6082 T6 (AlMgSi1) - Included in delivery: 2 cones, 4 steel pins, 4 safety clips- Length: 750 mm (without cone)- Width: 290 mm - Height: 50 mm- Weight: 2,1 kg

112,00 €*

delivery time 14 days
Temp PCB LED Ricochet Ikon Profi Focus Spot 2

4,90 €*

delivery time 14 days
Yamaha APX1000 NT Electric-acoustic guitare natural
Yamaha APX1000 NT - Electric-acoustic guitareTop: Solid Spruce Back: Flamed Maple Side: Flamed Maple Neck: Nato Fingerboard: Rosewood Bridge: Rosewood Body Depth: 80-90mm (3 1/8" - 3 9/16") Nut Width: 43mm String Length: 650mm Tuners: Die-Cast Chrome Preamp: System 63 SRT Colour: Natural

1.099,00 €*

delivery time 14 days
MEINL HCS Cymbal Set 14" Hihat, 16" Crash, 20" Ride + 10" Splash
MEINL HCS Cymbal Set-Up14" Hihat, 16" Crash, 20" Ride + 10" SplashAlloy: MS63 alloyFinish: Regular Fabrication: compressed

249,00 €*

delivery time 5 days
Ibanez AZ2204-ICM Prestige E-Guitar Ice Blue Metallic incl. Case
Ibanez AZ2204-ICM Prestige Electric Guitar Ice Bluemade in JapanAlder bodyScrewed S-Tech Wood Roasted Maple Neck (Thermally Treated Maple)"AZ Oval C" profileS-Tech Wood Roasted Maple Fingerboard (Thermally Treated Maple)22 stainless steel frets in jumbo formatLuminescent Side DotsTwo Seymour Duncan Hyperion single coil pickups in the neck and middle positionA Seymour Duncan Hyperion humbucker on the jettyIbanez dyna-MIX9 circuit with age switch for additional pickup combinationsMilled Gotoh T1802 tremolo with titanium string saddlesGotoh H.A.P. Magnum Lock machine heads with height-adjustable winding axesIncluding Ibanez Prestige case

1.799,00 €*

delivery time 14 days
Adapter mono 3,5 jack plug male /6,3 mono jack plug female

2,33 €*

Immediately available or ready for collection
10 m extension cable XLR 5 pol. male/female

15,96 €*

Immediately available or ready for collection
HighPressureValveFogFuryJett/Pro

25,00 €*

Immediately available or ready for collection
Fluid Senser for Antari Machine F-5D/F-5/W-515D/W-530D

24,90 €*

Immediately available or ready for collection
Battey clip for 9-Volt Battery, vertical

0,50 €*

Delivery time from 8 to 10 weeks!
90 ° angle for large red Antari pump

6,49 €*

Delivery time from 10 to 12 weeks!
Tank for Fogger F-80

9,90 €*

Immediately available or ready for collection