An LED switching power supply is required to operate the LED lighting. Depending on the power of the LED light, the right power supply unit must be selected. The outdoor version offers quieter and fanless switching power supplies.
Switching power supply in a closed design with guard screw. Direct mounting on the DIN rail.Universal input voltage with wide rangeOverload protection by current limit, shutdown after 3 secondsShort circuit, overload, overvoltage protectionBuilt-in PFC circuitLED indicator for power onDC OK relay contactpeak loadOutput voltage 24 VDC Current 20A Performance 480 W Inrush 80 A Input voltage 90 - 264 VAC Input voltage 127 - 370 VDC Ripple & Noise 100 mV Efficiency 94 % Length 125,2 mm Width 85 mm Height 128,5 mm Short circuit protectedOverload protectionSurge protection
Switching power supply for LED 24V/4,5A Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 4,5 AOutput power 100 W, working voltage adjustable approx. 21,6 - 26,4VInput voltage 88 - 264 VACFrequency 47-63 Hz, 1,5A / 230 VACConnection: terminal screwSize: 199 x 98 x 38 mm
LED Powersupply IP 65Max. output: 150W, Output voltage: DC 24V Power Supply: AC 110/230V- 50/60 HzPower connector: TerminalDimensions: 200 x 10 x 40 mm (LxWxH)Weight: 0,60 kg
Switching power supply, closed, 12V / 2.1A / 25WMeanwell Switching power supply in closed version with screw terminals and with interference filters. low ripple Overload protection by switching off, auto recovery. Short circuit protection. 100% burn-in test at full loadPower: 25 WInput: 85-264 VAC, 120 - 370 VDCOutput: 12 V / 2.1 A
Switching power supply for LED 24V/4,5A Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 4,5 AOutput power 100 W, working voltage adjustable approx. 21,6 - 26,4VInput voltage 88 - 264 VACFrequency 47-63 Hz, 1,5A / 230 VACConnection: terminal screwSize: 199 x 98 x 38 mm
MW HLG-320H-24AUniversal inputOverload protection, current limiting, auto recoveryProtections: short circuit/over load/over voltageBuilt-in active PFC functionSuitable for LED lighting and moving sign applicationsEN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13Typ A:IP65, for indoor and outdoor installationsAdjustable output voltage with internal potentiometerAdjustable output current with internal potentiometerInput Voltage: 90...305V AC (47...63Hz), 127...431V DCInput Inrush Current, Max.: 75AOver Load Protection: 95...108%Withstand Voltage (I/P-O/P): 3750V ACWithstand Voltage (I/P-FG): 1880V ACWithstand Voltage (I/P-FG): 500V ACOperating Temperature: -40...+70°CWeight: 1880g
Switching power supply for LED 24V/1,8A Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 1,8 AOutput power 40 W, working voltage adjustable approx. 21,6 - 26,4VInput voltage 10 - 240 VACFrequency 47-63 Hz, 1,6A / 230 VACConnection: terminal screwSize: 110 x 50 x 32 mm
LED PowersupplyMax. output: 200W, Output voltage: DC 12V Power Supply: AC 110/230V- 50/60 HzPower connector: TerminalDimensions: 220 x 110 x 50 mm (LxWxH)Weight: 1,2 kg
Universal inputOverload protection via current limit, auto recoveryProtected against short circuit, overload, excess voltageIntegrated PFC switching circuitFor LED and lighting applicationsEN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13Type A:IP65, for indoor and outdoor applicationsOutput voltage can be set via internal potentiometerCurrent limiting can be set via internal potentiometerInput voltage range: 90 - 305 V AC (47 - 63 Hz) 127 - 431 V DCInrush current, max.: 75 AOver-current protection: 95 ‑ 108%Insulation voltageInput to output: 3750V ACInput via ground: 1880V ACOutput via ground: 500V ACOperating temperature range: -40 - +70°CWeight: 1300 g
Universal inputOverload protection, pulsing hiccup shutdown, auto recoveryProtections: short circuit/over load/over voltageIP67, for indoor and outdoor installationsUL1310 Class 2Fixed output voltageDevices only for use in equipment with another primary purpose such as photocopiers, overhead projectors and slide projectors or for scale illumination or indication purposes.Suitable for indoor use and outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes.Input Voltage: 90...264V AC (47...63Hz), 127...370V DCInput Inrush Current, Max.: 60 AOver Load Protection: 110...150%Withstand Voltage (I/P-O/P): 3000V ACOperating Temperature: -30...+75°CWeight: 340g
MeanWell switching power supply, 960-W series, with PFCOutput voltage: 24 V DCAdjustable voltage range: 29 ~ 33 V DCOutput current: 0 - 40 A DCOutput: 960 WEfficiency: 94%Ripple: 180 mV• Can be directly mounted on the DIN rail• Closed design, contact-protected screw terminals• Input voltage: 180 ~ 264 V AC, 254 ~ 370 V DC• Protected against short circuit, overload, excess voltageAdditional technical data:• Input voltage range: 180 ~ 264 V AC, 254 ~ 370 V DC• Inrush current, max.: 52 A• Leakage current: max.: 3.5 mA• Operating temperature range: -30 - +70°C
MeanWell RS-75 series switching power supply, 49 to 76 W
Output Voltage: 5VDC
Adjustable voltage range: 4.75...5.5 V DC
Output Current: 12A
Power: 60W
Efficiency: 80.5%
Residual ripple: 80mV
closed design (case), screw connections
universal input
Overload protection by shutdown, auto recovery
protected against short circuit, overload, overvoltage
Long life 105 °C electrolytic capacitors
Further technical data:
Input voltage range: 88...264 V AC (47...63Hz) 125...373 V DC
Inrush current, max.: 40 A
Leakage current, max: 2mA
Output voltage adjustment: +10/-5%
Overload protection: 110...150%
insulation voltage
I/P-O/P: 3000VAC
I/P-FG: 1500VAC
O/P FG: 500VAC
Operating temperature range: -25...+70 °C
Dimensions (LxWxH): 129 x 97 x 38mm
Weight: 410g
LED PowersupplyMax. output: 150W, Output voltage: DC 24V Power Supply: AC 110/230V- 50/60 HzPower connector: TerminalDimensions: 200 x 10 x 40 mm (LxWxH)Weight: 0,60 kg
Switching power supply for LED 24V/2,5A IP 65Overloadprotection, short-circuit-proof, working temperature -10 to+ 60°COutput voltage 24V 2,5 AOutput power 60 W, working voltage adjustable approx. 10,8 - 13,2 VInput voltage 88 - 264 VACFrequency 47-63 Hz, 1,5A / 230 VACConnection: terminal screwSize: 159 x 97 x 38 mm
LED PowersupplyMax. output: 200W, Output voltage: DC 24V Power Supply: AC 110/230V- 50/60 HzPower connector: TerminalDimensions: 220 x 110 x 50 mm (LxWxH)Weight: 1,2 kg
LED PowersupplyMax. output: 320W, Output voltage: DC 24V Power Supply: AC 110/230V- 50/60 HzPower connector: TerminalDimensions: 220 x 110 x 50 mm (LxWxH)Weight: 1,4 kg
Switching power supply in a closed design with guard screw. Direct mounting on the DIN rail.Universal input voltage with wide rangeOverload protection by current limit, shutdown after 3 secondsShort circuit, overload, overvoltage protectionBuilt-in PFC circuitLED indicator for power onDC OK relay contactpeak loadOutput voltage 24 VDC Current 10A Performance 240 W Inrush 65 A Input voltage 88 - 264 VAC Input voltage 124 - 370 VDC Ripple & Noise 100 mV Efficiency 94 % Length 125,2 mm Width 63 mm Height 113,5 mm Short circuit protectedOverload protectionSurge protection
€122.00*
Immediately available or ready for collection
This website uses cookies to ensure the best experience possible. More information...
Warm welcome!
Please select the desired delivery country first.
Please confirm your selection.
All prices and availability are updated according to the selected delivery country.