MS101-4 is the standard model in Yamaha's range of desktop utility powered monitors, the MS101-4 offers portability in a compact design and simple but comprehensive functions for outstanding usability.30W of amplifier power provides clean, high output soundRedesigned enclosure for an even lower profileCombo Input jack accepts both XLR and 1/4" connectorsDirectly mountable on Euro microphone stands (Optional - not included - mic stand adaptor BMS-10A is available for adjusting tilt angle)Technical specifications:
Speaker type: full-range speaker, bass reflex type
Frequency Response (-10dB): 77Hz-20kHz
Maximum output level (1 m; on axis): 115 dB SPL
Power Consumption: 1/8 Power Consumption: 10W, Idle Power Consumption: 3W
Power requirement: 100 V - 240 V, 50/60 Hz
30 W of amplifier power ensure a clean, powerful sound
Redesigned housing for an even slimmer profile
Combo input jack for XLR and 1/4" connectors
Can be mounted directly on Euro microphone stands
Dimensions (W x H x D) 142 x 196 x 187 mm
Net Weight: 2.1kg
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsColor: WhiteDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter38Hz - 30kHz frequency response75W LF plus 45W HF bi-amp system for high-performance 120W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsColor: whiteDimensions (WxDxH): 250 x 390 x 334 mmWeight: 10.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter38Hz - 30kHz frequency response75W LF plus 45W HF bi-amp system for high-performance 120W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 250 x 390 x 334 mmWeight: 10.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
Tweeter: 1 "(25.4 mm) silk dome tweeterWoofer: 4.5 "(114.3 mm)Kevlar membraneOutput power: 120 watts, 2x 25 W (RMS)Frequency range: 69 - 22000 HzInputs: 2x Cinch (RCA), 2x 6.35 mm jack (TRS), 1x 3.5 mm stereo aux inputHeadphone output: 3.5 mm stereo jackControls: volume control, high and low EQ controls, speaker position switchHousing made of coated MDFPower consumption: 85 WPower supply: internal power supply 100 - 120 V / 220 - 240 V, 50/60 HzDimensions per speaker (W x D x H): 156 x 175 x 225 mmWeight per speaker: 2.23 kgIncludes 3.5 mm interconnect speaker cable, 3.5 mm to 3.5 mm jack cable and 3.5 mm jack to RCA cable
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
Equipment: 5 "woofer and 1.9" U-ART ribbon tweeter2x Class-D amplifier: 50W RMS woofer, 20W RMS tweeterFrequency range: 45 - 25000 HzCrossover frequency: 3 kHzMaximum level: 106 dB (1m / pair)Back bass reflex openingConnections: line input XLR and RCADimensions (W x H x D): 179 x 298 x 297 mmWeight: 5,7 kg
8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz22Hz - 150Hz frequency responseHigh-power 150W amplifier exclusively designed for low frequenciesLOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipmentXLR and TRS phone for outputs and XLR for L and R and EXT SUBDimensions (WxDxH): 300 x 350 x 389 mmWeight: 12.5 kg
Equipment: 7 "woofer and 1.9" U-ART ribbon tweeter2x Class-D amplifier: 50W RMS woofer, 20W RMS tweeterFrequency range: 39 - 25000 HzCrossover frequency: 2.6 kHzMaximum level: 110 dB (1m / pair)Back bass reflex openingConnections: line input XLR and RCADimensions (W x H x D): 210 x 347 x 293 mmWeight: 7.1 kg
Matched Pair - Limited ModelSpecially-matched parts help to optimise the acoustic performanceTwo-way bass-reflex bi-amplified nearfield monitorsIdeal for music production, mixing and masteringRoom control and high trim control for room optimisation2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
Matched pair - limited special modelcoordinated monitors for increased precision of playbackEquipped with: 6.5 "woofer (60 W) and 1" tweeter (35 W)Power: 95 W (bi-amp)Bass reflex systemFrequency range: 43 - 30,000 Hzbalanced input via XLR and 6.3 mm jackAdjustable input levelRoom control and high-trim tone controlDimensions per monitor (W x H x D): 210 x 332 x 284 mmWeight per monitor: 8.2 kgDelivery quantity: 1 pair
Adam Audio T10S10 "subwoofer in a compact, robust designFrequency response: 32 Hz - 120 HzLow Pass Filter130 Watt Class-D amplifiermatched to Adam T5V and T7VIntegration into other systems possible2 balanced XLR inputs and outputs2 RCA inputs and outputsDimensions (W x H x D): 318 x 390 x 413 mmWeight: 12.2 kg
The Neumann KH 80 DSP A G is an active 2-way studio monitor equipped with a built-in DSP, Mathematically Modeled Dispersion™ waveguide (MMD™), network control and an analog input. The KH 80 DSP was developed using the latest simulation and measurement technology and impresses with its acoustic authenticity and adaptability to a wide variety of installation conditions.The KH 80 DSP can be used as a near-field monitor, as a front speaker in small multi-channel systems, or as a rear speaker in compact multi-channel systems. It can be used in project, music and broadcast studios, OB vans and post-production studios for multi-track recording, mixing and mastering. In addition, it is also suitable for use in the home.Features:Active DSP studio monitorNew in-house simulated drivers with protective metal grillesPowerful metal alloy fabric tweeter domeElliptical Mathematically Modeled Dispersion™ (MMD™) waveguide with wide horizontal and narrow vertical dispersionLong-throw bass driver with resonance-optimized membrane design and powerful ELFF™ drive (Extremely Linear Force Factor™)Two-tone, dimmable Neumann logoCompact polycarbonate composite bodyLarge front bass reflex portsHomogeneous baffle without edgesPowerful, completely newly developed power amplifiers with high efficiency and large headroomIndependent thermal limiters for woofers and tweeters to protect the voice coils and power amps, soft clip limiters to protect the speakers from excessive deflection, and temperature monitoring for the electronicsHigh production consistency and minimal scatter through individual comparison during the final inspection4-stage acoustic controller for the low-mid range8 x precision alignment filters, accessed via control networkLipsync delay (0 … 70 ms)Propagation delay (0 … 70 ms)Linear phase crossover with bypassFlexible input/output level controlsControl network with standard Ethernet connectionConsistently balanced internal signal processingUniversal switching power supply (100 to 240 V)Extensive mounting hardware options (sold separately)Technical specifications:Driver: 4"/1"Power of the amplifiers: 120/70 wattsFree field frequency response: 57 Hz ... 21 kHz, +/-3 dBMaximum sound pressure: 108.8 dBDimensions/volume/weight: 233 x 154 x 194 mm / 7 liters / 3.4 kgInput: XLR/jackMounting points: 2 x M6 threads on the back of the case, spacing: 70 mm, depth: 16 mmSpecifications:Color grayEquipment woofer: 1 x 4 inchesFrequency response from: 57 HzFrequency response up to: 21000 HzIn a set: noNumber of ways: 2 waysType: studio monitorTopic: Recording and Studio
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
Matched pair - limited special modelMatched monitors for increased playback precision8 "woofer (75 watts) + 1" tweeter (45 watts)Power: 120 watt bi-ampBass reflex systemFrequency range: 38 - 30,000 HzInputs: XLR balanced and 6.3 mm jack balancedadjustable input levelRoom control and high-trim tone controlDelivery quantity: 1 pairDimensions per monitor (W x D x H): 250 x 334 x 390 mmWeight per monitor: 10.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter. Mounting points on 4 surfaces are available.2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsMounting points on 4 surfacesPackaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
Legendary Pedigree Over the span of more than a decade, Alesis monitors have established an enviable, well-deserved reputation for accuracy and dependability that made them an excellent choice for professional use. The original best-selling M1 monitors were perfect for almost any situation. Our latest generation, the M1 Active MK3, features advancements in studio monitor technology that bring the Alesis M1 series to a whole new level of legendary unmatched professional sound.Modern Aesthetics The M1 Active MK3 studio monitor utilizes a beautiful new 5-inch aluminum woofer that is lighter and stiffer than typical carbon-fiber, paper or glass-Aramid woofers, giving the MK3 an even faster transient attack and more linear response through the bass and midrange. Additionally, a precision-designed waveguide provides high-frequency dispersion in a well-controlled, predictable pattern. This ensures a widened listening “sweet spot”—even well to the side (“off axis”) of the speaker—while at the same time preventing random scattering of the sound. The smoothly radiused “aerodynamic” cabinet edge prevents objectionably-audible artifacts from edge diffraction and the flared front-firing bass ports eliminate distracting port turbulence from the speaker’s bass output.Pristine Clarity With M1 Active MK3 studio monitors, you can listen, mix, and create with complete confidence that you’ll get the most accurate sound. The M1 Active MK3 monitors feature a wide frequency response (from 55-22 kHz, ±3dB), so you can hear all the music with the lifelike realism demanded by today’s music. The M1 Active MK3 also features a Class A/B 40-watt LF amplifier/25-watt HF amplifier for smooth, “gutsy” performance and generous headroom compared to ordinary “digital” amplifiers. Additionally, the balanced XLR+1/4” combo input allows for complete hookup flexibility for all of your favorite studio equipment.FEATURES65W (40 LF, 25 HF) Bi-amplified design for powerful, accurate sound5” aluminum low-frequency driver; 1” silk dome tweeterNew computer-optimized tweeter waveguide for precise imagingOptimized front-firing ports for extended low-frequency responseBalanced XLR+1/4” combo input for complete hookup flexibilityUltra-wide 45-22kHz frequency response covers full musical spectrumCONTENTSM1 Active MK3 Studio MonitorPower CableUser GuideSafety and Warranty Manual
The A8H features an 8-inch multi-layer mineral fiber (MLM) woofer, an innovative mid-range driver, and ADAM Audio's hand-crafted X-ART tweeter. Like all models in the A series, the A8H offers innovative features for individual adjustment to personal listening habits and the acoustic environment: This is ensured by a rotatable HPS waveguide and the integrated DSP technology.This studio monitor is suitable for all conceivable monitoring situations in medium-sized and larger rooms. It is the perfect choice when the highest possible fidelity is required.The A8H is available in left and right versions.Handcrafted X-ART tweeter with rotatable HPS waveguide8'' woofer (multi-layer mineral)3.5" DCH midrange driverTotal amplifier power peak: 340 WFeatures:ADAM Audio - A8H-R SideTweeter: Rotatable X-ART tweeter + HPS WaveguideMidrange: 3.5” MLM midrangeMidrange voice coil Ø: 33 mm / 1.3"Woofer: 1 x 8" MLM mid-wooferWoofer voice coil Ø: 38 mm / 1.5"AD converter: 24-bitInternal sample rate: 96 kHzAmplifier power RMS: 250 W (woofer) + 70 W (midrange) + 20 W (tweeter)Crossover frequencies: 400 Hz, 3 kHzPower consumption: 500 W maxAnalog balanced input: 1 x XLRAnalog unbalanced input: 1 x RCASingle hardware unit (net): 13.6 kg / 30 lbs ozDevice in single carton: 16.6 kg / 36 lbs 10 ozDimensions (height x width x depth): 274mm x 382mm x 329mmPacking Size: 405mm x 510mm x 455mmAC input voltage: 100 - 240V, 50/60 Hz
1 599,00 €*
delivery time 14 days
This website uses cookies to ensure the best experience possible. More information...
Herzlich willkommen!
Bitte wähle zuerst das gewünschte Lieferland.
Bitte bestätige deine Auswahl.
Alle Preise und Verfügbarkeiten werden entsprechend dem gewählten Lieferland aktualisiert.