QPRO Audio P-208 Line array loudspeaker

The P208 line array module features a dipolar arrangement with two 8" neodymium transducers and a high precision 1.4" HF compression driver mounted onto a waveguide with 90° x 12° dispersion.

Both 8" transducers feature an extremely stiff UPM (Ultra Precision Membrane) carbon membrane design, which raises the particial oscillation to an inaccessible frequency range and reduces distortion to a minimum. The superior membrane damping is increased to a maximum, while natural oscillation is lowered to a smallest value. The UPM design further enables for increased speaker power capability of 500 W (RMS) for each single transducer. The P208 loudspeaker cabinet includes a passive 2-way crossover, which ensures for high efficiency in system cabling and amplifier configurations. The advanced bass-reflex ports eliminate side lobes, which usually occur with 2-way line array systems. The ground-breaking ECD design (Extended Coverage Design) ensures for a very precise mid-range coverage. The V-arrangement of the two 8" transducers and the two additional outlets at the sides extend the horizontal dispersion of 90° at the typically critical frequency range between 700 Hz and 1.100 Hz. The vertical coverage of 12° allows for a basic system setup with four cabinets only. The acoustical and mechanical design enables vertical arrays of up to twentyfour P208 modules. The verticals splay angles are adjustable from 0° to 12° in steps of 1.5°. The cabinet is constructed from marine plywood and is covered with weather and impact protecting NPP (QPRO Polyurea Protection) finish. The front of the loudspeaker is protected by a robust metal front grill with acoustically transparent foam. Each side includes one handle while two additional handles are included at the rear. The integrated three-point rigging hardware is recessed into the cabinet enclosure. The SLS (Splay Lock System) rigging technology makes splay adjustment to a walkover in two steps only, configuration and locking.

The P208 loudspeaker can be used for a wide range of applications, such as for stadiums, theatres, dance clubs, festivals, corporate events and churches.

QPRO SLS Rigging Technology (Splay Lock System)

Rigging as easy as it could be. Open the touring cart, pre-select each splay angle, lift the array and lock the rigging system.

ECD (Extended Coverage Design)

Two additional outlets at the sides extend the horizontal dispersion of 90° and ensure for a very precise mid-range coverage.

Frequency Range (-10dB) 66Hz - 20KHz

Frequency Response (+/- 3dB) 75Hz - 18KHz

Coverage Pattern 90° x 12°

HF Horn Planar Wave Horn

Crossover Modes Passive

Crossover Frequency 1 KHz

Power Handling 1.000 W / 4.000 W

(AES / Peak 10 ms)

Maximum Peak SPL* 136 dB

System Sensitivity (1W/1m) 100 dB

LF Drivers 2 x custom made 8" Beyma© Carbon Neodymium Speaker, 2.5" VC

HF Driver 1 x custom made 1.4" B&C© Neodymium Comp. Driver, 4" VC

Nom. System Impedance 8 Ohms

Enclosure 15/21 mm Birch Plywood

Rigging SLS Rigging System with Splay angle 0°-12° (1.5° steps)

Transport 4 integrated handles

Finish Black NPP PolyUrea coating

Grille Powder coated, black, perforated steel with acoustic transparent charcoal foam backing

Input Connectors 2 x Neutrik© Speakon© NL4, 1+/1- , 2+/2- Loop

Dimensions (WxHxD) 590 mm x 253 mm x 370 mm

Weight 21.5 kg (47.4 lbs)