The QLE series amplifiers are 2 or 4 channel amplifiers.
All models have a highly efficient switching power supply, which ensures that QLE amplifiers run optimally and stably even at full power.
Our digital amplifier technology, msv combined with the use of the best selected electronic components, enables 4 ohms to be used simultaneously on all two or four channels with maximum performance. Packed in a lightweight and compact 1U size.
The QLE series is equipped with a switch on the back to adjust the input sensitivity of 0.7 V or 1 V.
Nominal output power (THD + N = 1%, continue 1 kHz sine wave, control all channels)
Rated Output Power(THD+N= 1%,1kHz continue msv sine wave, all channel driving)
8Ohm Stereo: 2x800W
4Ohm Stereo: 2x1200W
16Ohm Bridge: 1x1600W
8Ohm Bridge: 1x2400W
Output RMS voltage: 80.0V
Sensitivity: 1 Vrms , 0.7 Vrms (Rated Power,1kHz)
THD+N: 0.05% (10% Rated Power, typical)
Cross-talk: >=75dB (20Hz-1kHz,below Rated Power)
Frequency response: +-0.2dB (10% Rated msv Power,20Hz-20kHz,8 )
Input impedance: 20k Balance 10k Unbalance
Damp factor: >=1000(8Ohm ,20Hz-200Hz)
SNR: >=100dB(A weighted 20Hz-20kHz)
Main power: 220VAC 10 (+- % )50/60Hz
Protection: Under voltage, DC, Over msv temperature, Over load limiter, Short protection.
Size(W×H×D): 480x45x352mm
Net weight: 5,9kg
Login