Perfect for speakers and singers
This set consists of 2 microphones EW-DX SKM-S (hand microphone with mute function), 2 capsules MMD 835 (cardioid characteristic, dynamic), 1 rack mount receiver EW-DX EM2 (2 channels) and 2 batteries BA 70.
FEATURES EW-DX EM 2
2-channel receiver, half rack width (9.5 in)
Up to 88MHz switching bandwidth
PoE IEEE 802.3af class 3
Equidistant channel spacing: 146 channels in standard mode; 293 channels in link density mode
Network-capable for control with the Sennheiser Control cockpit/media control system through a set of third-party modules
Clear and easy-to-use user interface with OLED display
Ethernet connection (IPv4 and IPv6)
Secure AES-256 encryption
External power supply 12 V / 1 A
all-metal body
FEATURES EW-DX SKM-S
10 mW RF power with a working range of up to
up to 100 m charging contacts for device-internal charging with CHG 70N
Permanent E Ink Display - Parameters stay on the screen visible even when the device is not is switched on
Programmable mute button on EW-DX SKM-S adapt the device to your professional needs
Function Keys - Control of all transmitter settings directly via the hand microphone
Extended runtime with lithium-ion batteries - up to 12 hours operating time
Standard capsule interface - compatible with a wide range of Sennheiser and Neumann capsules
Trim function for the microphone input
metal body
SCOPE OF DELIVERY
Stationary receiver EW-DX EM 2
2 hand-held transmitters EW-DX SKM-S
2 microphone modules MMD 835
2 microphone clamps MZQ 1
2 rod antennas
Power pack with country adapters
Rack mounting set GA 3
4 rubber feet
2 battery packs BA 70
quick start Guide
safety instructions
Manufacturer's Declaration
TECHNICAL SPECIFICATIONS
system
Audio link frequency ranges: S1-10 606.2 - 693.8 MHz
Bluetooth® Low Energy (BLE) frequency range 2402 - 2480 MHz
Audio frequency response 20 Hz - 20 kHz (-3 dB)
THD+N = -60dB for 1kHz, at -3dBFs input level
Dynamic range 134 dB
System latency 1.9 ms
Operating temperature range: -10°C - +55°C, (14°F - 131°F)
Relative humidity 5 - 95% (non-condensing)
EW-DX EM 2 (stationary receiver)
Input voltage: 11 - 13 V or PoE IEEE 802.3af class 0 (CAT5e or higher)
Input Current = 1A
Transmission power BLE: max. 10 mW EIRP
Audio output power 18 dBu max.
Headphone output 2x 70 mW @ 32 Ohm
Ethernet: RJ-45 socket, IEEE802.3, 100Base-TX (half+full duplex), 10Base-T (half+full duplex), (CAT5e or higher)
Dimensions 212 x 44 x 189mm
Weight approx. 1000 g (without antennas and power pack)
EW-DX SKM (handheld transmitter)
Input voltage 2.0 - 4.35 V
Input current < 300mA
Power supply: 2 AA batteries 1.5 V (alkaline manganese) or BA 70 battery pack
Bandwidth 200kHz
transmit power
Audio Link: 10mW ERP
(Area Y1-3: 12mW ERP)
LD mode: 10mW ERP
BLE: max 10mW EIRP
Dimensions (ø x l)
(with MMD 835 microphone module): 50 x 268 mm
(without microphone module): 40 x 200 mm
Weight (without batteries) (with MMD 835 microphone module): approx. 304 g
(without microphone module): approx. 195 g
MMD 835 (microphone module)
Converter principle: dynamic
Sensitivity: 2.1mV/Pa
Sound pressure level: 154 dB SPL
Pickup pattern: cardioid
19" Version: | Ja |
---|---|
Bluetooth: | Ja |
Characteristic: | Niere |
Colour: | Schwarz |
Includes power supply / power cord: | Ja |
Material: | Metall |
Microphone type: | Dynamisch |
max Sound pressure: | 154 dB SPL |
Login