Amps up to 1000W / 8 Ohm
Filter
–
Crown XTi 4002 Amplifier 2x 1200 Watt/4 Ohm
€1,399.00*
Crown Xti 1002, DSP control amplifier, 19" 2 U, 2x 1600 W (2 Ohm), 1200 W (4 Ohm), 650 W (8 Ohm), 2400 W Bridge 8 Ohm, 3200 Watt Bridge 4 Ohm, DSP-Control: Input EQ with 6 parametric Filters per channel with adjustable Q-Shelf and +/- 15 dB Gain, Crossover with High- and Lowpass, per channel with 6/12/18/24 dB per Octave and switchable polarity, Output EQ with 8 parametric Filters per channel with adjustable Q-Faktor and +/- 15 dB Gain, Delay up to 50 ms, Subharmonic Synth, Peak Plus Limiter with adjustable Threshold, Attack and Release, 50 Presets, 3 mode switchable cooling fan, HiQnet Band Manager and System Artchitect Software control by USB-Port Type B, display with temperature of powersupply and voltage, 2x NL 4 Speakon out, Binding Post out, XLR in/out, dimensions: 19" (485mm) x 2 U (89mm) x 311 mm, weight 8,4 Kg
Delivery time from 10 to 12 weeks!
QPRO Audio 2 channel amplifier 1HE 2 x 800W/8Ohm
€879.00*
The QLE series amplifiers are 2 or 4 channel amplifiers.All models have a highly efficient switching power supply, which ensures that QLE amplifiers run optimally and stably even at full power.Our digital amplifier technology, msv combined with the use of the best selected electronic components, enables 4 ohms to be used simultaneously on all two or four channels with maximum performance. Packed in a lightweight and compact 1U size.The QLE series is equipped with a switch on the back to adjust the input sensitivity of 0.7 V or 1 V.Nominal output power (THD + N = 1%, continue 1 kHz sine wave, control all channels)Rated Output Power(THD+N= 1%,1kHz continue msv sine wave, all channel driving)8Ohm Stereo: 2x800W4Ohm Stereo: 2x1200W16Ohm Bridge: 1x1600W8Ohm Bridge: 1x2400WOutput RMS voltage: 80.0VSensitivity: 1 Vrms , 0.7 Vrms (Rated Power,1kHz)THD+N: 0.05% (10% Rated Power, typical)Cross-talk: >=75dB (20Hz-1kHz,below Rated Power)Frequency response: +-0.2dB (10% Rated msv Power,20Hz-20kHz,8 )Input impedance: 20k Balance 10k UnbalanceDamp factor: >=1000(8Ohm ,20Hz-200Hz)SNR: >=100dB(A weighted 20Hz-20kHz)Main power: 220VAC 10 (+- % )50/60HzProtection: Under voltage, DC, Over msv temperature, Over load limiter, Short protection.Size(W×H×D): 480x45x352mmNet weight: 5,9kg
Immediately available or ready for collection
QPRO Audio 4 channel amplifier 1HE 4 x 600W/8Ohm
€1,049.00*
The QLE series amplifiers are 2 or 4 channel amplifiers.All models have a highly efficient switching power supply, which ensures that QLE amplifiers run optimally and stably even at full power.Our digital amplifier technology, msv combined with the use of the best selected electronic components, enables 4 ohms to be used simultaneously on all two or four channels with maximum performance. Packed in a lightweight and compact 1U size.The QLE series is equipped with a switch on the back to adjust the input sensitivity of 0.7 V or 1 V.Nominal output power (THD + N = 1%, msv continue 1 kHz sine wave, control all channels)Rated Output Power(THD+N= 1%,1kHz continue sine wave, all channel driving)8Ohm Stereo: 4x600W4Ohm Stereo: 4x900W16Ohm Bridge: 2x1200W8Ohm Bridge: 2x1800WOutput RMS voltage: 693VSensitivity: 1 Vrms , 0.7 Vrms (msv Rated Power,1kHz)THD+N: 0.05% (10% Rated Power, typical)Cross-talk: >=75dB (20Hz-1kHz,below Rated Power)Frequency response: +-0.2dB (10% Rated Power,20Hz-20kHz,8 )Input impedance: 20k Balance 10k UnbalanceDamp factor: >=1000(8Ohm ,20Hz-200Hz)SNR: >=100dB(A weighted 20Hz-20kHz)Main power: 220VAC 10 (+- % )50/60HzProtection: Under voltage, DC, Over msv temperature, Over load limiter, Short protection.Size(W×H×D): 480x45x352mmNet weight: 6,8kg
Immediately available or ready for collection