This adapter is used to mount loudspeakers on standard 35 mm diameter pole commonly used for loudspeaker stands. Pole not included.TT+ Approved Original AccessorySteel ConstructionPainted With Black, Scratch Resistant PaintPHYSICAL SPECIFICATIONSCabinet/Case Material: SteelColor: BlackSIZEWeight: 0.66 kg / 1.46 lbs

JBL JRX212M multifunctional PA speaker for musicianscan also be used as a stage monitor or front systemPassive 12"/1" multifunctional speaker High-quality 1" tweeter driver Distortion-free playback and balanced frequency response Controlled radiation behavior Overload protection circuit for tweeter drivers high quality crossover Load capacity: 250 W continuous load / 1000 W peak power Impedance: 8 ohms max. SPL: 128 dB. Frequency range: 60 - 20,000 Hz Speaker twist & jack input double pole flange Robust, felt-coated MDF housing Dimensions: 584 x 399 x 325 mm Weight: 19.5kg

Active Coaxial Speaker with DSP!12" woofer with a 2.5" voice coil1" compression driver (1.4" diaphragm)Maximum output level: 129 dB SPLPower (Continuous): 465 watts (LF: 400 W, HF: 65 W)Frequency range (-10dB): 55 Hz - 20 kHzAmplifier class: Class D

200W PREMIUM BATTERY POWERED PORTABLE PA200W of powerful, portable sound with 6.5” (165mm) woofer and 1” (25mm) tweeterFree Alto App (iOS/Android) for remote configuration and controlBluetooth music streaming direct from your deviceIntegrated 3-channel mixer with built-in Alesis FX2 “Combo” inputs (for mics, instruments, & line level sources)Connect two Buskers wirelessly via Bluetooth for stereo playbackBattery Eco Mode for increased performance up to 24 hoursRugged portable design that’s easy to transportUse standalone or on a pole with DSP Speaker Use modes for best soundAux input for non-Bluetooth devicesXLR Line outputTechnical SpecificationsOutput Power:Eco Mode: 50 W (Peak)Standard Mode: 200 W (Peak)Drivers:6.5" (165.1 mm) Woofer1.0" (25.4 mm) TweeterMaximum Sound Pressure Level: 106 dBFrequency Response: 60 Hz - 20 kHzConnections:2x Combo XLR-1/4" (6.35 mm) Inputs1x 1/8" (3.5 mm) AUX Input1x USB Charging Port1x XLR Line Output1x RCA OutputCharging Port: 5V, 2.1 ABluetooth® Specifications:Profile: A2DP, AVRCPVersion: 5.0 Codec: SBCFrequency: 2402 - 2480 MHz Maximum Transmit Power: 10 dBm Protocol: BLERange: 30.5 m (100 ft.)Battery:Type: 6.6 Ah, 12 V, Lithium-IonBattery Life: Eco Mode: up to 24 hours; Standard Mode: up to 20 hoursCharging Time: 12 hoursDimensions (HxWxD): 30 x 22 x 25.5 cmWeight: 5.4 kg

The AS8 ACDC active column system from Avante Audio, the perfect portable sound system for small venues, acoustic performers, and mobile entertainers. With its fully-featured and easy to set up design, this system comprises an 8-inch neodymium subwoofer enclosure and two column units, one loaded with six precision-aligned 2.75-inch neodymium drivers and the other serving as a spacer to lift the speaker column to optimal height.Thanks to Avante's innovative SAM (Secure Array Mount) system, the columns can be locked securely to the sub and to each other, without any risk of toppling over. SAM connection also eliminates the need for speaker cables by passing the audio signal from the sub up to the columns.The AS8 ACDC boasts a Class D power amplifier with a built-in limiter that delivers 1000W of power, making it perfect for small bands and solo performers. The flexible 4-input mixer with a 2-band EQ allows direct connection of line-level audio sources, microphones, and even guitars, while the BLUETOOTH 5.0®+ audio connection enables wireless streaming of music from your smartphone, tablet, or laptop.This lightweight system can be easily transported in a small car and comes with a padded bag for carrying and protecting the column units. It operates self-contained on a rechargeable Lithium-Ion battery, providing an average run time of 4 to 5 hours at full charge. Alternatively, it can be plugged in using the universal power supply (100 to 240 VAC 50/60Hz).The active vented subwoofer boasts a frequency response of 55-200Hz, with a maximum output SPL of 116dB (at max. amp output). The 8-inch neodymium subwoofer, with a 1.5” voice coil and 28 oz. magnet, is housed in a durable PP plastic cabinet with a 1.0mm steel grill. Meanwhile, the passive full-range speaker column has a frequency response of 180-20kHz, a maximum output SPL of 110dB, and is fitted with 6x 2.75-inch neodymium drivers. The cabinet is also made of durable PP plastic with a 1.0mm steel grill.The AS8 ACDC also features a 4-input mixer with line out, two mic/line inputs, two guitar/line inputs, and a 1/8” stereo Aux Input. Dual band EQ and a line output (XLR) round out the package. And with the extended position dimensions of 13.8”x16.9”x79.1” / 350x430x2010mm and compact position dimensions of 13.8”x16.9”x47.6” / 350x430x1210mm, the AS8 ACDC is versatile enough to handle any small venue gig.Overall, the AS8 ACDC active column system is the ideal solution for small venues, performers and mobile entertainers looking for a portable sound system that delivers premium sound quality and ease of use.SPECIFICATIONSystem Includes:• (1) 8-inch neodymium Subwoofer• (1) Column with six 2-75-inch neodymium Speakers• (1) Spacer• (1) Carry bag for columnsAmplifier:Inputs: Two XLR/TRS combo jacks, Stereo 1/4” inputs, Stereo 1/8” input, Bluetooth®Outputs: XLR balanced line outputPower output: RMS 250W (SUB) RMS, 1000W peakVolume: Input Gain control per channelEQ: Main out 2 band EQLEDs: Power/Clip indicatorPower Input: 100-240V~50/60Hz switchable 250WOn-board Lithium-Ion Battery. (Rechargeable)Battery life indicatorAmplifier: Class D amplifier with switching power designActive Vented Subwoofer:Frequency Response: 55-200HzMax Output SPL: 116dB (at max. amp output)Impedance: 4 OhmDriver: 8-inch neodymium subwoofer, 1.5” voice coil, 28 oz. magnetCabinet: PP plasticGrill: 1.0mm steelDimensions: 13.8”x16.9”x16.3” / 350x430x413mmWeight: 25.8 lbs. / 11 kg.Passive Full-Range Speaker Column:Frequency Response: 180-20kHzMax. output SPL: 110dBImpedance: 4 OhmDriver: 6x 2.75-inch neodymium driversCabinet: PP plasticGrill: 1.0mm steelDimensions: 3.8”x3.8”x34.3” / 96x96x870mm (each column)Weight: 11 lbs. / 5 kg. (each column)Rear Panel:4 input mixer with line outTwo (2) Mic/Line Input (XLR/TRS Combo)Two (2) Guitar/Line Input (1/4" Stereo)1/8” stereo Aux InputLine Output (XLR)Dual Band EQBattery life indicatorBLUETOOTH® 5.0+Extended Position:Dimensions: 13.8”x16.9”x79.1” / 350x430x2010mmCompact Position:Dimensions: 13.8”x16.9”x47.6” / 350x430x1210mm

Protection cover for EVOX 12 Subwoofer + speake

Padded Cover for ART 912-A, ART 9 SERIES. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear connection panel, and the pole mount cap.Outer fabric: 600D polyester on PVC baseInternal fabric: 190 T taffeta fabric on PVC basePadding: 10 mm foam rubberClosure / opening: Zip + VelcroEmbroidered grey logo

Padded Cover for ART 915-A, ART 9 SERIES. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear connection panel, and the pole mount cap.Outer fabric: 600D polyester on PVC baseInternal fabric: 190 T taffeta fabric on PVC basePadding: 10 mm foam rubberClosure / opening: Zip + VelcroEmbroidered grey logo

Qpro Audio CB15 15" replacement subwoofer

Portable PA system equipped with a 100 W power amp, coaxial compression driver with 1.4” voice coil HF and 6.5” cone LF, a 3-channel mixer, and internal lithium-ion battery100 W Class-D amplifier1.4” HF + 6.5” LF high-quality coaxial compression driver using an FIR filter for the crossover3-channel mixer (2 monaural mic/line + 1 line)Equipped with a 2-band master EQCompatible with Hi-Z input (Channel 2 only)Equipped with mix-outCarrying handle doubles as an adjustable standCompatible with audio accompaniment over BluetoothOptional carrying bag (BAG-STP100) available for convenient transportInternal lithium-ion battery

The PRM606 is a rack-mountable amplifier that can either be used as 100V amplifier or as a standard low-impedance amplifier. This 6 zone amplifier is designed for multi-room systems requiring different audio sources. It's equipped with BT receiver and USB/SD ports for MP3 playback including a bright LCD display with ID3 Tag. The PRM606 is provided with switchable XLR inputs with 48V Phantom Power, especially for paging and condenser microphones. Especially designed for applications such as paging, announcements, intercommunications, background music, broadcasting in industrial plants etc.100V matrix amplifier with 6 independent output zones6x 60W Class D power SectionMP3 Player with USB/SD slotUsing BT wireless technology for audio streamingLCD control panel with ID3 tag3x Mic/line inputs Combi 6.3mm Jack/XLR, 1x RCA line input and 1x RCA line outputXLR Microphone inputs with switchable phantom power (24V) and VOX priority100V or 4/8 Ohm speaker outputZone outputs: 6x Line (RCA Mono)Zone outputs: 6x Speaker Terminal (100V / 4Ohm / 8Ohm / Com)Bass and treble controlsChime with level control19" Rack mountable (2U)Emergency operation by 24V battery (not supplied)Protections: Overheat, short circuit and power on delayEmergency mute inputIncluding remote controlPlayback options: BT streaming, SD, USBOutput power: RMS 360WImpedance: 4 Ohm, 8 Ohm, 100VFrequency response: 100Hz - 24.000HzPower supply: 220-240VAC 50HzPower consumption: 2ADimensions (L x W x H): 390 x 483 x 95mm (without feet 88mm)Weight: 11.85kgAccessories: Mounting bracket, Power cable, Remote control

The DAP Xi-8 is an elegant 8 inch passive installation speaker with a 1.4" Celestion HF driver for clear Hi-Fi sound. It is particularly suitable for fixed indoor locations. Its ingenious design, with recessed Speaker 4-pin chassis, easily detachable magnet-mount grill and rotatable logo, is perfect for a variety of applications. Also, the speaker can be placed either horizontally or vertically due to its various mounting options. You can even rotate the horn 90 degrees to create the desired sound distribution (60°x90° or 90°x60°).This full-range 2-way speaker can be mounted directly to any ceiling or wall using the optional U-shaped mounting bracket and compact speaker wall bracket. The Xi-8 is not only versatile, it also fits into any environment since it is available in either black or white and works on any 8 O audio infrastructure.The speakers can be connected through either a Speaker 4-pin or green terminal connectors for a quick and cost-effective installation.250 W RMS, max SPL of 125 dB at 1 mClean full-range Hi-Fi sound (2-way system)Multiple mounting & connectivity optionsRotatable horn and logo for vertical mountingEasy detachable magnet mounted grillSpecificationsCollapse All: InputsMono Input Impedance: 8 OhmRMS Input Power: 250 WPeak Input Power: 1000 WPassive Input Connection: Speaker Connector 4 pole , TerminalAudio SpecificationsSpeaker System: 2-waySpeaker Sensitivity (1 W/1 m): 95 dBSpeaker Impedance: 8 OhmMaximum SPL at 1 m: 125 dBFrequency Response Minimum: 55 HzFrequency Response Maximum: 20000 HzFrequency Response (-10 dB) Minimum: 55 HzFrequency Response (-10 dB) Maximum: 20000 HzWoofer Diameter: 8 "Woofer Voice Coil Diameter: 2 "Woofer Magnet Type: FerriteCompression Driver Diameter: 1 "Compression Driver Voice Coil: 1.4 "Compression Driver Magnet Type: FerriteDispersion Angle (Horizontal): 90°Dispersion Angle (Vertical): 60°Mechanical SpecificationsHeight (mm): 430 mmWidth (mm): 290 mmLength (mm): 260 mmMaterial: PlywoodMaterial Thickness: 12 mmColour: WhiteFinish: PaintedWeight: 10.7 kgIP Rating: IP20 (indoor use only)Product PropertiesRotatable Horn: YesUseable as Monitor/Wedge: NoSpeaker Grille Material: SteelRiggingRigging Eye Thread: M8

Padded Cover for ART 910-A, ART 9 SERIES. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear connection panel, and the pole mount cap.Outer fabric: 600D polyester on PVC baseInternal fabric: 190 T taffeta fabric on PVC basePadding: 10 mm foam rubberClosure / opening: Zip + VelcroEmbroidered grey logo

2500 WATT SUBWOOFER WITH 12" DRIVERHigh efficiency class D amplifierTransducer: 12" driver with 3" high temperature voice coilA subwoofer built to lastRobust, internally braced MDF housing with front connections and integrated 36mm rod socketThe stain-resistant spray finish always looks good, even with heavy useElectronic clip, thermal and transducer overload protectionThe perfect addition to your live sound setup(2) XLR+1/4" combo inputs + (2) balanced XLR line outputs(2) XLR pass-through outputs for linkingUser selectable EQ tunings (Off, Live, DJ)Phase alignment selector switch (0°/90°/180°/270°)Power: 2500W peakLoudspeaker equipment: 12" wooferFrequency response (-3dB): 44 - 140 HzFrequency spectrum (-10 dB): 38 - 152 Hzmaximum sound pressure level: 130 dB (@ 1 m)Inputs: 2 x XLR + 6.35mmOutputs: 2 x XLRvolume controlLimiters with LEDSwitch for DSP output mode with LEDPhase inversion switchPower switch with LEDelectronic clip, thermal and converter overload protection circuitryInternally stiffened MDF caseintegrated speaker stand flange: 36 mmDimensions (H x W x D): 455 x 460 x 506 mmWeight: 25.9 kgColor: Black

2500 WATT SUBWOOFER WITH 15" DRIVERHigh efficiency class D amplifierTransducer: 15" driver with 3" high temperature voice coilA subwoofer built to lastRobust, internally braced MDF housing with front connections and integrated 36mm rod socketThe stain-resistant spray finish always looks good, even with heavy useElectronic clip, thermal and transducer overload protectionThe perfect addition to your live sound setup(2) XLR+1/4" combo inputs + (2) balanced XLR line outputs(2) XLR pass-through outputs for linkingUser selectable EQ tunings (Off, Live, DJ)Phase alignment selector switch (0°/90°/180°/270°)Power: 2500W peakLoudspeaker equipment: 15" wooferFrequency response (-3dB): 36 - 140 HzFrequency spectrum (-10 dB): 31 - 123 Hzmaximum sound pressure level: 132 dB (@ 1 m)Inputs: 2 x XLR + 6.35mmOutputs: 2 x XLRvolume controlLimiters with LEDSwitch for DSP output mode with LEDPhase inversion switchPower switch with LEDelectronic clip, thermal and converter overload protection circuitryInternally stiffened MDF caseintegrated speaker stand flange: 36 mmDimensions (H x W x D): 541 x 523 x 627 mmWeight: 39.6 kgColor: Black

2500 WATT SUBWOOFER WITH 18" DRIVERHigh efficiency class D amplifierTransducer: 18" driver with 3" high temperature voice coilA subwoofer built to lastRobust, internally braced MDF housing with front connections and integrated 36mm rod socketThe stain-resistant spray finish always looks good, even with heavy useElectronic clip, thermal and transducer overload protectionThe perfect addition to your live sound setup(2) XLR+1/4" combo inputs + (2) balanced XLR line outputs(2) XLR pass-through outputs for linkingUser selectable EQ tunings (Off, Live, DJ)Phase alignment selector switch (0°/90°/180°/270°)Power: 2500W peakLoudspeaker configuration: 18"Frequency response (-3dB): 29 - 100 HzFrequency spectrum (-10 dB): 27 - 111 Hzmaximum sound pressure level: 137 dB (@ 1m)Inputs: 2 x XLR + 6.35mmOutputs: 2 x XLRvolume controlLimiters with LEDSwitch for DSP output mode with LEDPhase inversion switch with LEDExtended bass response switch with LEDPower switch with LEDelectronic clip, thermal and converter overload protection circuitryInternally stiffened MDF caseintegrated 36 mm speaker flangeDimensions (H x W x D): 679 x 531 x 628 mmWeight: 42.2 kgColor: Black

EVOX 12 is the most powerful line-source in its class and offers a particularly profound and dynamic reproduction at high levels due to the built-in 1400W power amplifier. The top section has eight high performance neodymium 4 “full-range transducers with a phase plug. As a result, the EVOX 12 has a significantly increased low-mid playback at a constant level with a wide dispersion for the highs. The 15” subwoofer delivers powerful bass sound to reinforce a big party or the kick drum of a live band. Despite high performance, the enclosure is very compact, and thanks to integrated wheels and extendable handle very easy to transport.1400 Watt130 dB max SPL40 Hz 20 kHz frequency response15" Woofer8 x 4" neodymium full-range woofer90° x 30° slightly tilted pattern controlInnovative DSP processingPole mountable, easy set-up and transportationAcoustical specifications FREQUENCY RESPONSE: 40 Hz ÷ 20000 HzMAX SPL @ 1M: 130 dBHORIZONTAL COVERAGE ANGLE: 90°VERTICAL COVERAGE ANGLE: 30°Transducers FULLRANGE: 8 x 4.0'', 1.0'' v.cWOOFER: 15'', 3.0'' v.cInput/Output section INPUT SIGNAL: bal/unbalINPUT CONNECTORS: XLR, JackOUTPUT CONNECTORS: XLRINPUT SENSITIVITY: -2 dBu/+4 dBuProcessor section CROSSOVER FREQUENCIES: 180 HzPROTECTIONS: Thermal, RMSLIMITER: Soft LimiterCONTROLS: Volume, EQPower section TOTAL POWER: 1400 W Peak, 700 W RMSHIGH FREQUENCIES: 400 W Peak, 200 W RMSLOW FREQUENCIES: 1000 W Peak, 500 W RMSCOOLING: ConvectionCONNECTIONS: VDEStandard compliance CE MARKING: YesPhysical specifications CABINET/CASE MATERIAL: Baltic birch plywoodCOLOR: WhiteSize HEIGHT: 2200 mm / 86.61 inchesWIDTH: 410 mm / 16.14 inchesDEPTH: 560 mm / 22.05 inchesWEIGHT: 36.4 kg / 80.25 lbs

Qpro Audio C6 6" coaxial Speaker