Peripheral Equipments


Here you will find devices, controllers for adjusting and setting the audio signal and other accessories

TOPSELLER



Topseller

Ground Loop Isolator
High Quality Ground Loop Isolator2x RCA plug male / 2 x RCA plug female, perfect for eliminating hum - and overtone signals, deletes disturbing noises of computers, laptops and DVD players, earthing loop isolator Size: cylinder 60x35mmTotal lenght of cable : 60cm

9,40 €*

Immediately available or ready for collection
ART Z-Direct passive DI BOX
Passive DI BoxFrequency range: 10 Hz -50 kHzTHD: 0.01% Typical @ 1 kHzInput: unbalanced jackInput impedance 50 OhmOutput: XLR maleOutput impedance 600 OhmSwitchable low pass filter -3 dB @ 30 kHzPAD switch (0dB, -20dB, -40dB)Phase switch (normal / invert)Switchable ground liftDimensions: 44.5 x 107 x 89 mmWeight: approx. 340 g

42,00 €*

Immediately available or ready for collection
Alto Stealth Wireless Expander MK2 Kit
ADDITIONAL STEALTH WIRELESS MKII RECEIVERExpands your existing Stealth Wireless MKII systemSingle channel receiver with a 1/4" TRS output (per unit)Reliable UHF band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g

149,00 €*

Immediately available or ready for collection
dbx Crossover 223XS Stereo 2-way
dbx 223Xs - active Crossover - 2-way stereo or 3-way mono crossover24dB Linkwitz-Rileymono sub out, input/LF/HF gain controlsfactor selection (10x)phase reverse functionswitchable 40Hz HP filterbalanced XLR in/outinternal PSUDimensions: 19"/1U

225,00 €*

Immediately available or ready for collection
Denon Pro DN-200BR Stereo Bluetooth® Audio Receiver
Balanced XLR and 6.3 mm jack outputsUp to 33 m rangeBluetooth receiverSolid high-quality product for installations

129,00 €*

Immediately available or ready for collection
dbx Crossover 234XS Stereo 3-way
dbx 234 Xs Crossover XLR connectors40Hz high passphase reverse switch on all outputsx10 rangemode switches for mono 4-way or stereo 2-way/3-way operation internal powersupply 19" 1U

259,00 €*

Immediately available or ready for collection
dbx 131S graphic equaliser 1x 31-band
dbx 131s Graphic Equalizer - 1x 31-band+/- 6/12dB gainoutput meterswitchable bypassclip LED, 50Hz low cut filter (12dB/octave)20mm faders>108dB dynamic range6/12dB switchbalanced jack/XLR in/outinternal power supplyDimensions: 19"/1U

205,00 €*

Immediately available or ready for collection
ART Phantom 2 Pro
ART Phantom II Pro, 2-Channel Phantom Power Supply with Battery Support, for up two Condenser Microphones, XLR connectors for balanced inputs and outputs, Low power, high efficiency CMOS circuitry for Long battery life using a standard 9 Volt battery (Alkaline recommended), Can be powered with an external power supply (not included) from AC mains, Rugged extruded aluminum case with accessible battery compartment, LED lighted On/Off switch, Low noise, low distortion circuitry

104,00 €*

Immediately available or ready for collection
Bluetooth Ultimate Radio transmission system for active speakers Bluetooth
Bluetooth Ultimate is a stereo Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Ultimate, you can quickly and easily add stereo Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR inputs of a mixer or powered speaker setup, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Ultimates together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Ultimate running for over 6 hours. Bluetooth Ultimate is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerLink two together for cable-free stereo playback*Dual XLR outputs for wired stereo playback*100+ft rangeXLR on front and backUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Ultimate, or the Alto Professional Bluetooth Total 2, both sold separately. Original Bluetooth Total is not supported. Additional XLR cable not included.

79,00 €*

Immediately available or ready for collection
ARTSplitMix4 Splitter/Mixer
Splitter / Mixer4-channel passive mixer4 stereo input channelsstereo output (all 6.3 mm jack connectors are stereo -tip, ting, sleeve)Dimensions: 47 x 117 x 104 mm

85,00 €*

Immediately available or ready for collection
dbx AFS2 Feedback Eliminator
DBX AFS2 digital signal processor for feedback eliminationExtremely fast algorithm detects feedback and corrects them instantlyExtremely narrow notch filters remove a fraction of the frequency spectrumThus, changes of sound are so minimal that they are barely audible24 programmable filters per channelClear display of the set notch filters - 24 LEDs per channel2 operating modes - Fixed Mode and Live ModeUser-friendlyIt is operated via buttons and comfortable knobs Display of all settings on the LCD displayWizard function of AFS2 enables configuration in just a few stepsAlso fully manually adjustableIs connected to the general monitor or between mixer and amplifierIs it possible to grind also on the channel insert of the mixerThe 2 channels of stereo or AFS2 can be operated independentlyDimensions (HxTB): 4,45 x 14,92 x 48,26 cmWeight: 2.04 kg

489,00 €*

Immediately available or ready for collection
Dbx ZC1 programmable volume controller, wall panel
Volume control to regulate the zone volumefor DBX ZonePro 640/641/1260/1261 and DriveRack 260suitable for standard wall mounting box

83,00 €*

Immediately available or ready for collection
QPRO Audio QLM 2.4N Digital loudspeaker controller 2in/4out
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 2 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 4 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 192kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:

799,00 €*

Immediately available or ready for collection
Rane DR6IM Touchscreen Remote
The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired. Ability to use custom background images and logos in full-color on the 7-inch LCD display.Screw the included wall-mount bracket over U.S. (or international) electrical boxes, or flush-mount the DR6 with the bracket, and cut a 2 (5 cm) square hole in the wall to accommodate the cable.Optional, on-screen User Access logins secure management pages from public or staff use, and a programmable ambient light sensor automatically dims the backlight. The Control Page Designer in Halogen allows the user to create one set of pages and use them in a web control design, DR6 display or both.FeaturesFully customizable touchscreen controllerElectrical box or wall flush-mount optionsSupports multiple pages or tabs and any set of levels, toggles, selectors and/or commandsDrag, drop and resize controls as desiredRANE RPI (Remote Power Injector - not included) required for use withHAL3s and legacy HAL multiprocessorsIn the BoxDR6Wall-Mount BracketUser GuideSafety & Warranty Manual

269,00 €*

Immediately available or ready for collection
RCF RDNet Control 8 8 output Master Unit
The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations. The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc. Data transfer can be routed also through the provided xlr connectors enabling the control of the system on traditional multi-cored cables.FEATURESETHERNET (REMOTE CONTROL) AND USB (DIRECT CONTROL) PC CONNECTION TO RDNETCONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICESALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECONDAUTO DETECT DEVICE PLACEMENTControlling slave devices status and functionsMonitoring and displaying faults and warnings sent from slave devicesStoring subnet user filters configuration in a removable memory cardGENERAL SPECIFICATIONSNumber of subnets: 8Connectors: RJ 45, XLRMax number of devices (for each subnet): 32Configuration: PC softwarePC connection: USB (type B), EthernetData storage: SD card (max. 4 GB)Operating voltage: 90-240 V~ 50/60HzPower consumption (W): 15RDNet: YesSTANDARD COMPLIANCECE compliance: YesPHYSICAL SPECIFICATIONSCabinet/Case Material: MetalColor: BlackRack mounting: 19", 1USIZEHeight: 44 mm / 1.73 inchesWidth: 482 mm / 18.98 inchesDepth: 182 mm / 7.17 inchesWeight: 2.71 kg / 5.97 lbs

1.699,00 €*

Immediately available or ready for collection
ART PDB Passive Direct Box
The PDB™ Passive Direct Box is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs.The PDB™ also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.PDB Applications:Electric guitar and bass pick up output signals – The high impedance signal from a guitar or bass guitar pickup is translated by the PDB™ into a low impedance balanced signal required by mixing consoles.Keyboards and line level signals – The PDB™ automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the PDB™ can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the PDB™ and then to the console (instead of a separate DI box for each keyboard).DJ console output signals – DJ mixers often supply only an unbalanced -10dB signal. The PDB™ converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables.Speaker level signals – The PDB’s ability to accept speaker level inputs from a power amplifier’s output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix.SpecificationsFrequency Response: 10 Hz – 50 kHz +/- 0.5dB @ +4dBuOutput Connections: 600 O XLR Output JackGround Lift: SwitchableInput Attenuation: Switchable (0dB, -20dB, -40dB)Instrument Input: 50k OParallel Link Jack: 50k ODimensions: 3" x 5" x 2"

49,00 €*

Immediately available or ready for collection
dbx CT3 Advance Cable Tester
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.Recommended for: Studio, Tour, Portable. FeaturesTests up to 8-pin cables2 piece chassis for testing installed cablesTest Tone GeneratorAllows connection between different format connectors with ease‘Banana’ connector continuity tester with beeper and LED indicatorSuper-rugged construction for durability and longer life(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections(2) BNC connectors for testing of 2 pin->to pin connections(2) RCA Phono connectors for testing of 2 pin->to pin connections(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections(2) Speaker Twist connectors for testing of 4 pin->to pin connections(2) Banana connectors for testing of 1 pin->to pin connections(2) 1/4" (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections(2) RJ45 connectors for testing of 8P8C modular connections(2) 1/8" (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections

205,00 €*

Immediately available or ready for collection
Bluetooth Total MKII Radio transmission system for active speakers Bluetooth
Bluetooth Total is an XLR-equipped, rechargeable Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Total, you can quickly and easily add Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR input of a mixer or powered speaker, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Totals together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Total running for over 6 hours. The Bluetooth Total is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerWirelessly link two together for cable-free stereo playback*XLR-equipped connection100+ft rangeUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Total 2, or the Alto Professional Bluetooth Ultimate, both sold separately. Original Bluetooth Total is not supported

49,00 €*

Immediately available or ready for collection
Boss AB-2 2-Way Selector
PRACTICAL AND AFFORDABLE A/B SELECTORThe BOSS AB-2 is a practical helper when switching the equipment: you can, for example, switch two guitars in front of an amplifier. Or you can use the AB-2 to switch between two amps (or an amp and a tuner) with a guitar. Many guitarists are already familiar with the shape and size of the popular and proven BOSS footswitch FS-5U (silver) and the footswitch FS-5L (black).Switches either two inputs to one output or two outputs to one inputSwitching by active electronics: no switching clicksNo influence on the switched signals (-20 dBU inputs and outputs)Display of the switching status by red LED (Channel A) and yellow LED (Channel B)Current consumption only max. 5 mAPowered by 2x micro batteries (AAA size)Operating time with simple zinc-carbon batteries approx. 100 hours!Housing size as with the well-known BOSS FS-5U footswitches and BOSS FS-5L footswitchesCheap price!Nominal input level: -20 dBuNominal output level: -20 dBuControlPedalIndicators: A (red), B (yellow)Connectors: A jack, B jack, IN/OUT jackCurrent consumption: 5mA or less* Expected battery life for continuous use: Carbon: 100 hours* This value varies depending on the actual usage conditions.Power Supply: Dry battery [Type R03/LR03 (AAA)] x2Accessories: Instruction manual, dry battery [Type R03/LR03 (AAA)] x 2, number sticker

52,00 €*

Immediately available or ready for collection
ART PDB4 Four-Channel Passive Direct Box
ART PDB4 Four-Channel Passive Direct Box DetailsThe ART PDB4 Four-Channel Passive Direct Box is a deceptively simple, yet surprisingly useful addition to any serious collection of audio equipment. The PDB4 is a four channel passive direct box that features four quality, fully transformer isolated, direct boxes in a 1U 19-inch rack mount chassis. Inputs and outputs of each of the four channels are isolated to maximize channel separation. Transformer isolation on each output helps to eliminate system ground loops.It is a rock solid, roadworthy interface for connecting outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced audio products. The PDB4 also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.Electric guitar and bass pick-up output signals, keyboards and line level signals, DJ console output signals, speaker level signals. However you decide to use it, we're sure you'll find the ART PDB4 Four Channel Passive Direct Box to be an indispensable addition to your audio equipment arsenal.ART PDB4 Four-Channel Passive Direct Box FeaturesFour Fully Isolated ChannelsSwitchable Input Attenuation (0dB, -20dB, -40dB)50k Ohm Instrument/Line Input50k Ohm 1/4-inch Parallel Link Jack600 Ohm XLR Output JackSwitchable Ground Lift1U 19-inch Chassis

139,00 €*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails