All the benefits of the Element Hex IP now available in a shiny chrome jacket! From the Element Par Series, the Element HEXIP Pearl is an IP54 outdoor rated battery powered LED Par in a chrome metal housing with ADJ’s WiFLY EXR wireless DMX for indoor or outdoor use. It’s powered by six 4W RGBAW+UV (6-IN-1) LEDs. The Element Par Series are lightweight and easy to operate with a carry handle and kickstand for uplighting, staging, events, productions and any mobile application. No cables or wires needed!Specifications:SourceLight Source: 4 RGBWA+UV HEX-LEDs (Red, Green, Blue, White, Amber and UV)Individual LED wattage : 10WAverage LED lifetime : approximately 50,000 hrs.OpticsBeam Angle: 20 degreesLUX: 684@2m; 171@4mControl5 operational Modes : RGBWA+UV dimmer Mode, AutoRun Mode, Sound Active, Static Color Mode and Wireless DMX Mode Control5 DMX Modes: 6, 7, 8, 11 & 12-channel 63 Color MacrosElectronic Dimming: 0 - 100% 5 selectable Dim Curves (Standard, Stage, TV, Architectural, Theatre)LED refresh Rate : 3600HzLED pulse and strobe effect 4-button, DMX digital display on rear panelBuilt-in WiFLY EXR wireless DMXColorsRGBWA+UV Color MixingConstructionChromed Metal HousingIP Rating: IP54Kickstand to angle the fixtures at 3 different degree levelsElectricalMultivoltage 100-240V 50/60HzPower Consumption: 42WPWM frequency: 1000Hz for flicker free operationEnergy Safe ModeBattery :Battery Type: fixed lithium batteryBattery Energy: 73.26WH (Watt Hours)Battery Weight: 0.42 kg.Battery Voltage: 11.1VBattery Capacity: 6.6AHTotal Lithium Ion Cells: 9 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 4 Hours (With POWER switch On)Battery Life: 9 hours (single color) ConnectionsUSB Update PortIEC Power In connectionDmensions & WeightDimensions (LxWxH): 140 x 140 x 192mm Weight: 2,9 kg.
- Black Out: Turns fixture On/Off- Auto Run: Automatically run through built-in programs- Program Selection Access units built-in programs- Flash: Strobe effect- Speed: Control speed of Auto Run- Sound Active: Activates sound active mode- RGB Buttons: Adjust RGB colors with the "*" and "-" buttons- + and - Buttons: Adjust flash rate, speed of the Auto Run and Program Selection The ADJ RFC Remote is compatible with:- Jelly Go PAR64 RGBA- Jelly PAR Profile System- Mega Bar RGBA- Mega Go Bar 50 RGBA- Mega Go Flood BAR- Mega Go Flood PAR- Mega Go Flood PAR HO- Mega GO PAR64 RGBA- Mega PAR Profile System- Ultra Bar 6- Ultra BAr 9- Ultra Bar 12- Ultra Go PAR7X- Ultra Hex PAR 3- WiFly Par QA5- WiFly Par QA5 WH- WiFly Bar QA5- WiFly Bar RGBA- WiFly Go Flood Par- WiFly QA5 IP
The ADJ 5PX Hex Pearl is a versatile LED Par fixture with 5 x 12-Watt , 6-IN-1 HEX LEDs in a white metal housing. With a 30-degree beam angle, users may produce wide washes with smooth color mixing from 63 built-in color macros utilizing red, green, blue, amber, white and UV LEDs. Not only is this LED Par great for lighting stages, but with its patent pending, intelligently designed, powerKon and 3 & 5pin DMX connectors, it’s great for uplighting a venue.5PX HEX Pearl professional features include: 4 DMX modes (6, 7, 8, & 12 channel), 5 operational modes, 5 dimming curves, flicker free operation and a 4-Button DMX menu with digital display. Daisy-chain up to 11 units together via the fixtures built-in PowerKon In/Out power connectors.The 5PX HEX Pearl is compatible with the Dotz Par RF, easy-to-use, wireless RF remote (sold separately). Alternatively the fixture may be operated via a DMX controller or the units built-in programs. Specifications:Ultra bright, flat wash fixture with 5 x Red, Green, Blue, Amber, White & UV LED pixels in a white metal housingSmooth RGBAW + UV color mixingGreat as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performersIntelligently designed, patent pending power & DMX Ins/Outs sit sideways so the unit can be set flat on the ground or set inside truss4 DMX Modes: 6, 7, 8, & 12 channel 5 Operational modes: Static Color Mode, RGBAW & UV Dimmer Mode, Program Mode, Sound Active Mode and DMX Controlled7 Built-In Programs63 built-in Color MacrosFlicker Free operation (No flickering on camera)5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)LED pulse and strobe effect Electronic Dimming: 0 - 100% Beam angle: 30-degree4-button, DMX digital display on rear panelDotz Par RF wireless remote sold separatelyDual yoke allows fixture to be hung or set on the groundData linkable via 3 & 5-pin XLR cables Power linkable via PowerKon power cables. (11x 5P Hex’s Max @ 100V, 21x 5P Hex’s Max @ 240V.)Light Source: 5 x 12-Watt RGBAW + UV LEDs, (Rated at approximately 50,000 hrs.)Power Draw: 60W total (All LED's @ Full On)Multi-voltage operation: AC 100-240V, 50/60Hz (IEC power in/Out) Dimensions (LxWxH): 210 x 100 x 220mmWeight: 2 kg
The Vizi Wash Z37 is a 740W professional moving head wash fixture with variable motorized zoom (10 ~ 60-degrees) and thirtyseven 20W Quad (RGBW / 4-IN-1) LEDs. It features 9 zones of LED ring control, smooth 16-bit dimming control from 0-100%, locking powerCON In/Out to daisy chain power, both 3-pin and 5-pin DMX In/Out and a built-in USB port for a convenient connection to update software if needed. This fixture is ideal for stages, theaters, churches, nightclubs, concert venues and event productions.Light Source:37x 20W RGBW (4-IN-1 - Red, Green Blue & White) Osram LEDs20,000 Hour Average LED LifeLUX @ 5M: 15000 lux @ 10-degrees; 1100 lux @ 60-degreesEffects:9-zone Ring Control with Color MacrosVariable Strobe & Pulse effectsConnections:Seetronic locking power In/Out to daisy chain power 3-pin and 5-pin DMX connections for data linkingRDM (Remote Device Management)USB Input for Updating Fixture FirmwareControl:Motorized Linear Zoom: 10 ~ 60-degrees4-button Touch Control Panel with Large LED ScreenControl: DMX-512 & RDMMultiple DMX Channel Modes (14, 16, 17 & 61 channels)Dim Modes: 6 Presets (Standard, Stage, TV, Architectural, Theatre & Stage 2)Dim Speed control (0.1~10 Seconds)Dimming: 0 - 100% Strobe & pulse controlVarious Strobe speeds (1-40Hz)Adjustable LED Refresh Rates (900~25k Hz)Adjustable Gamma Settings (1.0-2.8)Color display with touch button on two sidesWith Wired Digital Communication NetworkElectrical:Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)
Immediately available or ready for collection
No manufacturers found
Please check the following:
- are there logos assigned to them?
- are there products assigned to them?
- are there sold items for the manufacturers yet?
- try another ordering type for your manufacturers
- different language? Open the shopping experience element and configure it for this language!
Profile Spotlights: The profile spotlight is used to project a clearly delimited illuminated area. The demarcation to the dark areas is precise and exact. There are profile spotlights with manual or automatic focus. Many models with automatic focus also offer color wheels or gobo wheels for projecting patterns or figures. FR Fresnel Lights: The FR Fresnel spotlight casts a rather harsh light. Which has the advantage that the headlight illuminates well and evenly even over longer distances. It is mainly used in the theater or film productions.
The PAR spotlight is a spotlight which was mainly used in event lighting until a few years ago. Due to the modern LED technology, these original PAR cans are rarely found. The housings are divided into PAR 16, 20, 30, 36, 38, 56 and 64 according to its size. PAR 56 and 64 were the most common forms that were used for area illumination and the PAR 36 was used as a pinspot.
In contrast to conventional PAR spotlights, modern LED lights use special light-emitting diodes, so-called LEDs, instead of conventional lamps. A major advantage of LED technology is its low power consumption and long service life. A low heat build-up makes it easier to work with and in front of the headlight. With RGB color mixing, up to 16.5 million colors can be displayed and a wide variety of white tones from cold white to warm white. Everything perfectly coordinated for your application. These so-called 'flat' lights are LED headlights with a narrow, flat housing. LED lighting for the outside area. With IP65, the outdoor spotlight can be placed outdoors without hesitation, in rain and snow even for a longer period of time
LED bars are headlights in a narrow, elongated shape. They provide width, indirect lighting. Due to the low installation depth, the LED bar can be easily hidden. Some models can also create matrix effects, which then serve as eye-catchers at every party.
Scanner and Moving Heads
Scanner and Moving Heads are the devices for moving light in a room. The scanner is a spotlight whose light beam is deflected by an electromechanically movable mirror. The moving head is a head-moving spotlight that can be swiveled around two axes. In contrast to the scanner, the moving head moves the entire "head" including the light source. Whereas with the scanner the light source is fixed and the mirror or mirror roller moves.
LED Follow Spots
The Follow Spot is a special form of the profile spotlight, which is used for example to put the actor in the limelight on a stage, in film, television or shows. The Follow Spot sends out a strong, precise beam of light that only highlights the desired section and leaves the rest in the dark. The spotlight follows the movements of the actor.