MS101-4 is the standard model in Yamaha's range of desktop utility powered monitors, the MS101-4 offers portability in a compact design and simple but comprehensive functions for outstanding usability.30W of amplifier power provides clean, high output soundRedesigned enclosure for an even lower profileCombo Input jack accepts both XLR and 1/4" connectorsDirectly mountable on Euro microphone stands (Optional - not included - mic stand adaptor BMS-10A is available for adjusting tilt angle)Technical specifications:
Speaker type: full-range speaker, bass reflex type
Frequency Response (-10dB): 77Hz-20kHz
Maximum output level (1 m; on axis): 115 dB SPL
Power Consumption: 1/8 Power Consumption: 10W, Idle Power Consumption: 3W
Power requirement: 100 V - 240 V, 50/60 Hz
30 W of amplifier power ensure a clean, powerful sound
Redesigned housing for an even slimmer profile
Combo input jack for XLR and 1/4" connectors
Can be mounted directly on Euro microphone stands
Dimensions (W x H x D) 142 x 196 x 187 mm
Net Weight: 2.1kg
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsColor: WhiteDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter38Hz - 30kHz frequency response75W LF plus 45W HF bi-amp system for high-performance 120W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 250 x 390 x 334 mmWeight: 10.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter38Hz - 30kHz frequency response75W LF plus 45W HF bi-amp system for high-performance 120W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsColor: whiteDimensions (WxDxH): 250 x 390 x 334 mmWeight: 10.2 kg
Equipment: 5 "woofer and 1.9" U-ART ribbon tweeter2x Class-D amplifier: 50W RMS woofer, 20W RMS tweeterFrequency range: 45 - 25000 HzCrossover frequency: 3 kHzMaximum level: 106 dB (1m / pair)Back bass reflex openingConnections: line input XLR and RCADimensions (W x H x D): 179 x 298 x 297 mmWeight: 5,7 kg
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz22Hz - 150Hz frequency responseHigh-power 150W amplifier exclusively designed for low frequenciesLOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipmentXLR and TRS phone for outputs and XLR for L and R and EXT SUBDimensions (WxDxH): 300 x 350 x 389 mmWeight: 12.5 kg
Equipment: 7 "woofer and 1.9" U-ART ribbon tweeter2x Class-D amplifier: 50W RMS woofer, 20W RMS tweeterFrequency range: 39 - 25000 HzCrossover frequency: 2.6 kHzMaximum level: 110 dB (1m / pair)Back bass reflex openingConnections: line input XLR and RCADimensions (W x H x D): 210 x 347 x 293 mmWeight: 7.1 kg
Matched pair - limited special modelcoordinated monitors for increased precision of playbackEquipped with: 6.5 "woofer (60 W) and 1" tweeter (35 W)Power: 95 W (bi-amp)Bass reflex systemFrequency range: 43 - 30,000 Hzbalanced input via XLR and 6.3 mm jackAdjustable input levelRoom control and high-trim tone controlDimensions per monitor (W x H x D): 210 x 332 x 284 mmWeight per monitor: 8.2 kgDelivery quantity: 1 pair
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter43Hz - 30kHz frequency response60W LF plus 35W HF bi-amp system for high-performance 95W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 210 x 332 x 284 mmWeight: 8.2 kg
Matched Pair - Limited ModelSpecially-matched parts help to optimise the acoustic performanceTwo-way bass-reflex bi-amplified nearfield monitorsIdeal for music production, mixing and masteringRoom control and high trim control for room optimisation2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
Adam Audio T10S10 "subwoofer in a compact, robust designFrequency response: 32 Hz - 120 HzLow Pass Filter130 Watt Class-D amplifiermatched to Adam T5V and T7VIntegration into other systems possible2 balanced XLR inputs and outputs2 RCA inputs and outputsDimensions (W x H x D): 318 x 390 x 413 mmWeight: 12.2 kg
The A4V is a 2-way speaker and uses ADAM Audio's renowned X-ART tweeter. It is equipped with a 4-inch bass-midrange speaker whose membrane - as with all A-Series models - is made of an extremely light but extremely stable mineral fiber material (MLM).Thanks to DSP technology, the A4V delivers perfect sound in a wide variety of listening environments in no time at all. Its frequency response of 52 Hz to 45 kHz qualifies it for a wide range of applications - from podcast production to mixing a string quartet. In addition, the A4V is perfect for multi-channel systems.Handcrafted X-ART tweeter with rotatable HPS waveguide4'' woofer (multi-layer mineral)Total amplifier power peak: 130 WFrequency Response @ -6dB: 52Hz - 45kHzMax. peak SPL per speaker at 1 m: 100 dB SPLFeatures:ADAM Audio - A4VRotatable X-ART tweeter + HPS WaveguideWoofer: 1 x 4" MLM wooferWoofer voice coil Ø: 25 mm / 1” voice coilPlayback range at -6 dB: 53 Hz - 42 kHzMax. Peak SPL per speaker at 1m: 100 dB SPLAD converter: 24-bitInternal sample rate: 96 kHzAmplifier power RMS: 110 W (woofer) + 20 W (tweeter)Crossover frequency: 3.0 kHzPower consumption: 300 W maxAnalog balanced input: 1 x XLRAnalog unbalanced input: 1 x RCASingle hardware unit (net): 5.8 kg (12 lbs 13 oz)Device in single carton: 7.3 kg (16 lbs 1 oz)Dimensions (height x width x depth): 268 x 158 x 220 mm (10 1/2" x 6 1/4" x 8 5/8")Package Size: 390 x 285 x 345mm (15 3/8" x 11 1/4" x 13 5/8")AC input voltage: 100-240V, 50/60Hz
The Yamaha HS8i is an active near-field studio monitor for use in the studio and home recording sector and is clearly in the tradition of its legendary predecessor from the NS series, an absolute standard in music production. Thanks to the new, unique 120W high-performance amplifier (bi-amp system consisting of 75W woofer plus 45W tweeter), the HS8I generates an almost linear frequency response.The HS8i is innovated with the mounting points embedded in the housing on all four sides. This makes it possible to attach the HS8I to the wall or ceiling using the appropriate brackets (BWS, BCS, BBS).Technical specifications:2-way bass reflex bi-amp8 "cone woofer1 "dome tweeter.Frequency range -10db: 38Hz - 30kHzFrequency range -3db: 47Hz - 24kHzIntegrated 95W high-performance amplifier (bi-amp system consisting of 75W woofer plus 45W tweeter)Adjustment of playback using ROOM CONTROL and HIGH TRIMXLR and 6.3mm jack input for balanced and unbalanced signalsHousing material: MDFDimensions: 250mm / 390mm / 334mm (W / H / D)Weight: 10.7 kgMounting points on all four sides
Active 2-Way Studio MonitorCoaxial design- Speaker components: 5" Woofer, 1" Tweeter- 90 W Class-D power amp (50 W woofer, 40 W tweeter )- Frequency response: 49 - 22,000 Hz (+/- 3)- Bass reflex port on the front panel- Adaptable EQ (adapts to the installation location)- Low frequency cut-off (Flat, 60 Hz, 80 Hz, 100 Hz)- Volume control with increment markings- Auto standby function- Inputs: XLR, RCA- Power supply: 100 - 240 V- Dimensions: 234 x 176 x 230 mm- Weight: 3.8 kgQuantity per pack: 1 Monitor
However, the A44H offers a very interesting housing variant: With its horizontal driver arrangement and a width of exactly 19 inches, the A44H can be placed perfectly on a studio rack and above or below a screen or screen. This design is also ideal for use as a center speaker in a 5.1, 7.1 or 3D monitor configuration.Two 4-inch long-throw woofers and an X-ART tweeter enable a wide frequency range. The functions of the DSP offer individual options for sound adjustment.Handcrafted X-ART tweeter with rotatable HPS waveguide2 x 4'' woofers (multi-layer mineral)Total amplifier power peak: 130 WFeatures:Rotatable X-ART tweeter + HPS WaveguideWoofers: 2 x 4" MLM woofersWoofer voice coil Ø: 25 mm / 1”AD converter: 24-bitInternal sample rate: 96 kHzAmplifier power RMS: 110 W (woofer) + 20 W (tweeter)Crossover frequency: 3.0 kHzPower consumption: 300 W maxAnalog balanced input: 1 x XLRAnalog unbalanced input: 1 x RCASingle hardware unit (net): 9.7 kg / 21 lbs 6 ozDevice in single carton: 12.1 kg / 26 lbs 11 ozDimensions (height x width x depth): 135mm x 432mm x 350mmPacking Size: 265mm x 560mm x 475mmAC input voltage: 100 - 240V, 50/60 Hz
Perfect for home studios, video-editing, gaming and mobile devicesSeparate high- and low-frequency drivers with crossover3-inch low-frequency driver in ported enclosure delivers rich, tight bass1-inch silk dome tweeter provides smooth, clear highs10W per channel output power; 20W totalHigh-density wood cabinets suppress unwanted resonancesElliptical tweeter waveguide optimizes dispersion and stereo imagingCarefully formed baffle radiuses reduce edge diffractionDedicated subwoofer output for use with virtually any powered subwooferType: 2-way desktop speaker systemWoofer / midrange: 3 '' (7.6 cm)Tweeter: 1 '' (2.5 cm), silk domeFrequency response: 80 Hz - 20 kHzInputs: 2 x unbalanced cinch inputsOutputs: 3.5 mm stereo jack output (subwoofer), 3.5 mm stereo jack output (headphones)Power: 2 x 10 W (continuous)Power indicator: blue LEDPower supply: 110 - 240 V / ~ 50/60 HzDimensions: 127 x 163 x 190 mmWeight: 2.9 kg
The Neumann KH 80 DSP A G is an active 2-way studio monitor equipped with a built-in DSP, Mathematically Modeled Dispersion™ waveguide (MMD™), network control and an analog input. The KH 80 DSP was developed using the latest simulation and measurement technology and impresses with its acoustic authenticity and adaptability to a wide variety of installation conditions.The KH 80 DSP can be used as a near-field monitor, as a front speaker in small multi-channel systems, or as a rear speaker in compact multi-channel systems. It can be used in project, music and broadcast studios, OB vans and post-production studios for multi-track recording, mixing and mastering. In addition, it is also suitable for use in the home.Features:Active DSP studio monitorNew in-house simulated drivers with protective metal grillesPowerful metal alloy fabric tweeter domeElliptical Mathematically Modeled Dispersion™ (MMD™) waveguide with wide horizontal and narrow vertical dispersionLong-throw bass driver with resonance-optimized membrane design and powerful ELFF™ drive (Extremely Linear Force Factor™)Two-tone, dimmable Neumann logoCompact polycarbonate composite bodyLarge front bass reflex portsHomogeneous baffle without edgesPowerful, completely newly developed power amplifiers with high efficiency and large headroomIndependent thermal limiters for woofers and tweeters to protect the voice coils and power amps, soft clip limiters to protect the speakers from excessive deflection, and temperature monitoring for the electronicsHigh production consistency and minimal scatter through individual comparison during the final inspection4-stage acoustic controller for the low-mid range8 x precision alignment filters, accessed via control networkLipsync delay (0 … 70 ms)Propagation delay (0 … 70 ms)Linear phase crossover with bypassFlexible input/output level controlsControl network with standard Ethernet connectionConsistently balanced internal signal processingUniversal switching power supply (100 to 240 V)Extensive mounting hardware options (sold separately)Technical specifications:Driver: 4"/1"Power of the amplifiers: 120/70 wattsFree field frequency response: 57 Hz ... 21 kHz, +/-3 dBMaximum sound pressure: 108.8 dBDimensions/volume/weight: 233 x 154 x 194 mm / 7 liters / 3.4 kgInput: XLR/jackMounting points: 2 x M6 threads on the back of the case, spacing: 70 mm, depth: 16 mmSpecifications:Color grayEquipment woofer: 1 x 4 inchesFrequency response from: 57 HzFrequency response up to: 21000 HzIn a set: noNumber of ways: 2 waysType: studio monitorTopic: Recording and Studio
2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter54Hz - 30kHz frequency response45W LF plus 25W HF bi-amp system for high-performance 70W power amplificationROOM CONTROL and HIGH TRIM response controlsXLR and TRS phone jack inputs accept balanced or unbalanced signalsDimensions (WxDxH): 170 x 285 x 222 mmWeight: 5.3 kg
Thanks to the latest ADAM audio technology, the A77H also sets new standards in terms of richness of detail and spatial representation. Two 7-inch woofers, a mid-range driver and ADAM Audio's X-ART tweeter provide the widest frequency response within the A-Series loudspeakers.The additional mid-range driver ensures precise reproduction of the mid-frequency range, which is particularly sensitive to the human ear. The rotatable HPS waveguide and the integrated DSP also enable the A77H to be precisely adapted to individual acoustic requirements.Handcrafted X-ART tweeter with rotatable HPS waveguide3.5" DCH midrange driver2 x 7'' woofers (multi-layer mineral)Total amplifier power peak: 340 WADAM Audio - A77HTweeter: Rotatable X-ART tweeter + HPS WaveguideMidrange: 3.5” MLM midrangeMidrange voice coil Ø: 33 mm / 1.3"Woofer: 2x 7" MLM mid-wooferWoofer voice coil Ø: 38 mm / 1.5"AD converter: 24-bitInternal sample rate: 96 kHzAmplifier power RMS: 250 W (woofer) + 70 W (midrange) 20 W (tweeter)Crossover frequencies: 400Hz, 3. kHzPower consumption: 500 W maxAnalog balanced input: 1 x XLRAnalog unbalanced input: 1 x RCASingle hardware unit (net): 17.1 kg / 37 lbs 11 ozDevice in single carton: 20.5 kg / 45 lbs 3 ozDimensions (height x width x depth): 236mm x 531mm x 350mmPacking Size: 370mm x 665mm x 475mmAC input voltage: 100 - 240V, 50/60 Hz
F8S Fluid Audio Fader SeriesDesigned for recording studios, gaming, home theaters and more, the Fluid Audio F8S active subwoofer delivers exceptional bass response in a compact footprint.Many types of music benefit from bass extension - from Hip-Hop, to House, to Rock. Being able to hear your mix with this bass extension is critical to accurately creating your music. The F8S subwoofer allows you to hear every detail down to 30Hz - and in a compact size.Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why we included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.The F8S also has two built-in EQ settings that allow for two different settings - depending on your music: A more conventional Flat response, as well as a "Punch" setting that is perfect for Dance or other mid-bass heavy music.For further flexibility, the F8S has a variable phase adjustment to fine tune the phase for optimal matching to your L/R monitors (0-180 degrees), a variable low pass crossover filter control (50-200Hz) and a 80Hz high pass filter (used with foot switch) for satellite connections.Details- 200 Watts of class D power with switching power supply- 8-inch composite paper cone with high temperature voice coil and damped rubber surround- active subwoofer- front baffle Fader volume control- bass-reflex vent port on front baffle for ease of placement- amplifier standby function to conserve energy- XLR balanced and 1/4" balanced/unbalanced inputs and RCA inputs- XLR balanced and 1/4" balanced/unbalanced outputs- Variable lowpass filter control: 50Hz-200Hz- Switch for both "Flat" and "Punchy" settings- 80 Hz highpass filter(with foot switch) for satellite connections- Included footswitch allows you to turn F8S on and off for auditioning with bass and withoutDimensions: (W x D x H): 175 x 195 x 260 mmWeight: 5 kg
333,00 €*
delivery time 14 days
This website uses cookies to ensure the best experience possible. More information...
Herzlich willkommen!
Bitte wähle zuerst das gewünschte Lieferland.
Bitte bestätige deine Auswahl.
Alle Preise und Verfügbarkeiten werden entsprechend dem gewählten Lieferland aktualisiert.