Wire rope holders are available in different versions and these are used to suspend static loads on wire ropes / suspension ropes. Depending on the type, there are three or six guided balls inside the holder. These are held in the cone by a spring. The wire rope / suspension rope to be used is fed through the wire rope holder with the open end. Now the holder can be continuously adjusted to any desired point of the suspension rope upwards. As soon as the "Gripper" is released, it is loaded and clamps onto the suspension cable. The greater the load, the greater the pressure of the balls inside the holder on the rope. To release the connection, all you have to do is press the nozzle on the upper part of the gripper with your finger and then move the cable holder down as you like. Once the holder has been tightened, it can no longer slip or be moved.
Turnbuckles, high-strength, eye/eyeHot-dip galvanizedMaterial: Tempered steelDesign: With right and left-hand thread and an especially long tensioning rangeStandard: Similar to ASTM F1145, formerly FF-T-791WLL (Working Load Limit): 2.36 tNominal size: 3/4x12B min: 16 mmC min: 25 mmE min: 41 mmL min: 305 mmAdjustment range from - to: 584 - 813 mmWeight: 2.3 kg
The wire rope holder with ring, locking nut and six-ball gripping mechanism is TÜV certified and has also the test certificate for use in the scope of application DGUV regulation 17 (BGV C1).Users who use products in event and production sites for scenic representations are obliged to always observe the latest regulations in the area of work safety and accident prevention. The user is responsible for the post-processing.Specifications:Application: only for indoor useVersion: black galvanizedWire rope Ø: 4.0mm and 5.0mmSafe working loads: 60-90kg due DGUV 17 (old BGV C1)Max. deflection angle: 5°Diameter: 25mmBore diameter: 30mmExternal diameter: 54mmTotal lenght: 104mmWeight: 0,35kg
