The Saber Spot RGBW is a compact Pinspot with smooth RGBW color mixing from one 15W 4-in-1 Quad LED, and features DMX-512, flicker-free operation, 64 built-in color macros, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.The Saber Spot RGBW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.Features:Compact LED Pinspot with ACL lens for a tight, razor sharp beam4-button LED display on rear panelScissor bracket system allows fixture to be hung or set on the groundRun all night – No duty cycleSmooth RGBW color mixing (fast or slow color change operation)Flicker-free operation for film and television 9 built-in Color MacrosColor strobe effect Electronic Dimming: 0 - 100% Beam angle: 4-degree Specifications:15-Watt LED (4-in-1) Quad RGBW LED11 DMX Channel modes: 3/4/4/5/6/6/8/8/9/11/12 channel modes 6 Operational modes: Static Color Mode; Color Change Mode; Color Fade Mode; Auto Run Mode; Sound Active Mode and DMX-512 ModeLinkable via 3-pin XLR cables (In/Out)Power Draw: 14W maxLong Life LEDs (10,000 hrs.)3-pin XLR In/Out pigtailspowerCON In/OutMulti-voltage operation: 100-240V, 47/63HzDimensions (LxWxH): 3.5” x 6.75” x 3.5”/ 88 x170 x 87mmWeight: 2.6 lbs. /1.2 kgs.

The Saber Spot WW is a compact Pinspot with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button DMX display system on the rear panel. Its built-in ACL lens produces a razor sharp 4-degree beam angle.The Saber Spot WW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.Features:Compact LED Pinspot with ACL lens for a tight, razor sharp beam4-button LED display on rear panelScissor bracket system allows fixture to be hung or set on the groundRun all night – No duty cycleFlicker-free operation for film and televisionStrobe effect Electronic Dimming: 0 - 100% Beam angle: 4-degreeSpecifications:15-Watt Warm White LED2 DMX Channel modes: 1 or 2 channel modes Linkable via 3-pin XLR cables (In/Out)Power Draw: 15W maxLong Life LEDs (10,000 hrs.)3-pin XLR In/Out pigtailspowerCON In/OutMulti-voltage: 100-240V, 47/63HzDimensions (LxWxH): 3.5” x 6.75” x 3.5”/ 88 x170 x 87mmWeight: 2.6 lbs. /1.2 kgs

The ADJ Lighting Mirage Q6 PAK is an all-in-one event up lighting system with six IP65 rated, battery powered fixtures and a durable flight case with an on-board battery charging solution.Each Mirage Q6 IP fixture is powered by four 10W RGBA LEDs that produce a 15-degree beam angle. The fixture is IP65 rated and is waterproof; suitable for temporary use outdoors with protection against the elements (rain, snow, dust and sand). Built-in WiFLY EXR wireless DMX allows for the fixtures to communicate with a lighting controller, also with WiFLY EXR wireless DMX, up to 2,500 feet (700M) away.Ideal for wall washing, Mirage Q6 IP fixtures are all fitted with an integral carry handle and built-in feet which mean they can simply be dropped in place and are ready to go. They also feature a built-in kickstand which allows the beam to be easily angled inwards towards a wall if required. This creates a more intense wash and minimizes light spill onto the ceiling above.Each fixture has an alarm system with on/off controls. If someone picks up the fixture with the alarm system on, the fixture will make a beeping sound and strobe in red.The robust battery will operate up to 40 hours on a single color (20 hours changing colors). The battery charge time is 7 hours.Sold in a system of six portable LED battery powered fixtures inside a charging flight case.FIXTURE SPECIFICATIONSSource:4 x 10-Watt RGBA LEDs (4-in-1 - Red, Green, Blue & Amber)50,000 Hour Average LifeLUX: 9903 @ 2M; 2303 @ 4MOptics:11-degree beam angleControl:11 DMX Channel modes: 4, 6, 7, 8, 9A, 9B, 10, 11, 12, 15 or 18 channelsControl protocol: WiFLY EXR Wireless DMX, UC-IR (Included)5 Operation modes: RGBA Dimmer Mode, Auto Run Mode (13 programs, & 1 color/fade combo mode), Static Color mode and Wireless DMX ControlLED pulse and strobe effect (0.2Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 6 dim modes and 4 dim curvesRun all night No duty cycleColor:RGBA Color mixing64 built-in Color MacrosConstruction:Metal housing with chrome finishIP65 Rated for temporary outdoor useBuilt-in kickstand to angle fixture when sitting on the floorCarrying handleBuilt-in alarm system with On/OffBattery charge indicator on each fixtureElectrical:Power Input: DC 17.3VAmperage Draw: 2A40W Max Power Consumption (each unit)Battery Type: Fixed lithium batteryBattery Energy: 162.8WH (Watt Hours)Battery Weight: 0.84 kg.Battery Voltage: 14.8VBattery Capacity: 11000mAh (Typical Capacity) Battery Charge Time: 7 HoursBattery Life: 20 hours (changing colors); 40 hours (single color) Connections:Contact Charging system. 6x Charging bases and power supplies included in flight case Dimensions & Weight:Length: 143mmWidth: 143mmHeight: 211mmWeight: 2.8kg. PAK SPECIFICATIONS:Mirage Q6 PAK Includes:6 MIRAGE Q6 IP Fixtures1 MIRAGE Q6 FC Flight Case6 MIRAGE Q6 IPCB Charging bases and power supplies1 UC-IR Wireless Infrared Controller1 IP65 Locking Power Cable PAK Features:Houses / Transports and Charges 6 MIRAGE Q6 IP™ fixtures PAK Dimensions & Weight (loaded case with 6 fixtures):Length: 672mmWidth: 461mmHeight: 449mmLoaded Weight: 44.4 kg PAK Electrical:Power Input: AC100VAC~240VAC, 50/60Hz IP65 Power Locking Input and OutputMax Power Consumption: 400 WattsPower Draw: 4ACharge status indicator-10°C to 45°C

The ADJ COB CANNON WASH DW uses advanced Cool White and Warm White COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches.The COB Cannon Wash DW produces wash of 40 & 50 degree with supplied optics and 120 -degrees without special optics. It has DMX Channel modes for programming flexibility, built-in color macros and selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, DMX and power power daisy-chaining , and a 4-button DMX display. It may run in its stand-alone mode from built-in programs,from a DMX controllerSpecificationswith one WW/CW COB LED- COB Technology (Chip On Board) produces powerful, smooth Dynamic White mixing- 150w ww/cw COB- Built-In preset colors and programs- Flicker Free operation (No flickering on camera)- LED pulse and strobe effect- Electronic Dimming: 0 - 100%- selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)- Beam angle: 40-degrees & 50-degrees with supplied lens kit- 3-pin XLR chassis mount connectors for DMX linking- Power Con in/out to daisy chain power - 4-button digital DMX display on rear panel - Compatible with wireless remote control (sold separately)- Single yoke allows fixture to be mountedapproximately 50,000 hrs)- Auto sensing power supply: AC 100V/60Hz - 240V/50Hz

The ADJ Encore Burst 100 IP is a high intensity, IP65 outdoor rated audience blinder/strobe with 125W Warm white (2700K) CREE C.O.B. LED and dim to warm feature. The fixture is constructed of a rugged metal housing. The fixture features a dim to warm effect that replicates a halogen-like dimming profile with a 50-degree beam angle.The Encore Burst 100 IP has selectable dimming curves, strobe effect, 4-button LED menu system, 5-pin DMX In/Out plus True 1 powerCON IN/Out to daisy chain power (rubber protective covers over connections).Specifications125W Warm White C.O.B. (Chip On Board) CREE LEDColor Temperature: 2700K (1200K dim to warm mode)Beam angle: 50-degreeIncludes magnetic holder to easily attach a diffusion filterDisplay: OLED display with 4-button touch menuData In/Out: 5-pin DMX IP65 (with rubber protective covers over connections)Power In/Out: powerCON IP65 (with rubber protective covers over connections)All metal constructionScissor yokeCompact designSafety loop on rearPower voltage: AC100-240V, 50/60Hz (Multi-voltage)Protection Rating: IP65 (outdoor protection from dust, sand, moisture & liquid)

The ADJ COB Cannon Wash ST Pearl is a shorter version of the popular COB Cannon Wash Pearl fixture. It uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of retail stores, stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash ST is a QUAD RGBA 4-In-1. It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.The COB Cannon Wash ST Pearl comes in a white casing and has massive 80-degree beam angle. Easily replaceable 40-degree and 50-degree lenses are included so that the beam angle may be changed.It has 7 DMX Channel modes for programming flexibility, built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, 3- & 5-pin DMX and powerCON power daisy-chaining and a 4-button DMX display. COB Cannon Wash ST Pearl may run in its stand-alone mode from built-in programs, sound actively or from a DMX controller.OPTICAL:Light Source: 1x 150-Watt COB (Chip on Board) Quad LED (RGBA: 4-IN-1, rated at approximately 50,000 hrs)Light Output: 1970 LUX @2M; 474 LUX @4M (40-degree beam), 1472 LUX @2M; 373 LUX @ 4M (50-degree beam), 996 LUX @2M; 238 LUX @4M (80-degree beam)80-degree beam angleIncludes lens kit to change to 40-degrees or 50-degrees beam angleCONNECTIONS:3-pin & 5-pin connectors for DMX linkingpowerCon AC IN/OUT to daisy chain power (up to 5 fixtures)CONTROL:7 DMX Channel modes (3,4,5,6,7,9,10 Ch.)64 built-in color macros4-button digital DMX display on rear panelCompatible with wireless remote control (sold separately)LED pulse and strobe effectElectronic Dimming: 0 - 100%5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)Refresh Rate:1KHzFEATURES:Flicker Free operation (No flickering on camera)Produces powerful, smooth RGBA color mixing with rich palettes of colorUse as Wash/par or Pixel Mapped for a stunning visual effectScissor yoke allows fixture to be mounted on truss or set on the groundOptional Barn Doors sold separatelyRun all night – No duty cycleELECTRICAL:Auto sensing power supply: AC 100V/60Hz - 240V/50Hz Power Draw: 132W maxDaisy chain up to 5 fixtures maximum DIMENSIONS / WEIGHT:Dimensions (LxWxH): 13” x 10” x 7.5” / 330x256x190mm (with bracket); 8.75” x 7.5” x 7.5” / 218.5x190x190mm (without bracket)Weight: 9 lbs. / 4.1 kg.

The ADJ Encore Burst RGBW IP is a high intensity, IP65 outdoor rated audience blinder/strobe/Washer with a 150W RGBW C.O.B.LED. The fixture is constructed of a rugged metal housing. The fixture features a 50-degree beam angle.The Encore Burst RGBW IP has different selectable dimming curves, strobe effect, 4-button LED menu system, IP65 rated, 5-pin DMX In/Out plus Seetronic IP65 power locking IN/Out connections to daisy chain power (rubber protective covers over all connections).Light Source:1x 150W RGBW C.O.B. LED50-degree Beam Angle50,000 Hour Average LED LifeFeatures:Multiple DMX Modes6 Dimming Curve Modes16bit Dimming: 0 - 100% Strobe & pulse controlDisplay: OLED display with 4-button touch menuConnections:Data Input: IP65 rated 5pin DMX In/Out (with protective rubber caps)Power Input: Seetronic IP65 power locking In/Out (with protective rubber caps)Safety Cable LoopScissor yoke with Omega bracket attachment Electrical:100-240V 50Hz/60Hz (Auto Sensing)Max Power Consumption: 118WIP65 Rated:Outdoor Rated: protects from dust, sand, moisture, liquid. 6 (Protection against Dust); 4 (Protection against Water)Please note: you must use IP65 data and power cables in order for this fixture to be IP65 outdoor rated.Dimensions / Weight:Dimension (L x W x H): 342,7 x 226 x 153,2mmWeight: 3,8kgWhat’s Included:1x Omega Bracket1x Seetronic IP65 power locking cable

The Saber Spot Go is a battery powered, compact Pinspot with smooth RGBW color mixing from one 15W 4-in-1 Quad LED, and features DMX-512, flicker-free operation, built-in ACL lens produces a razor sharp 4-degree beam angle and a battery life option of 2, 4, 6 or 8 hours.The Saber Spot Go is ideal for use where electrical outlets are limited or running cables in not possible. The fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.Specifications15W RGBW (4-IN-1) LED Engine (10,000 hr.)4.5-degree beam angle with ACL LensWiFLY EXR wireless DMX built-in (wireless DMX up to 2500 ft./700m)Multiple DMX channel modes4-button control menu with LED display5 Dimmer curve modesVariable strobe speed0-100% Dimming + smooth 16-bit DimmingInput Voltage: 100-240V 50Hz/60Hz (Auto Sensing)Running Time Mode: 2 hrs. / 4 hrs. / 6 hrs. / 8 hrs.All metal constructionAdjustable hanging bracket with magnetic baseDimensions (LxWxH): 5.5” x 6.75” x 8.5” / 140 x 170 x 215mm Weight: 3 lbs. / 1.4 kg

The Par Z120 RGBW is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 115W quad C.O.B. LED (Chip On Board) LED with red, green, blue & white colors. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options.The Par Z120 RGBW allows lighting and stage designers the look of the traditional stage par with the technological conveniences of modern day lighting. The advantages include low power draw, fixture and performers won’t get hot on stage, DMX control of dimming and strobe. There are no dimmer controllers need. The fixture comes with a gel frame in which diffusion filters may be inserted to further change the beam angle.Optical:115 Watt Quad RGBW LED (Red, Green, Blue & White)Life expectancy: rated at 50,000 hrs.Beam angle: 7, 11.5, 16, 20.5 or 25-degree (manual adjustment)Connection:DMX: 5-pin DMX In/OutpowerCON In/Out to daisy chain fixtureControl:Control protocol: DMX-512?6 DMX Channel Modes (4/5/6/7/8/9 Channels)Features:4-button DMX menu display on rear panelAdjustable latch to manually change beam angleIncludes gel frame for diffusion filters (Diffusion filter sold separately)Strobe effect Flicker Free Operation16bit Electronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycle Electrical:Multi-voltage operation: AC 100-240V, 50/60HzDimensions / Weight:Dimensions (LxWxH): 19.5” x 11” x 9” / 491 x 275 x 224mm?Weight: 8.5 lbs. / 3.9kg.

White Housing Kit for MOD 100 Series LED PARs :MOD HEX100MOD QW100MOD TW100

The ADJ Element ST HEX is the of the latest addition to ADJ’s Element series of battery powered wireless LED up-lighters. Building on the success of ADJ’s popular Element Hex, the new model features an extremely compact design as well as a full-color touch screen display for extremely easy setup and DMX addressing. Utilizing the power of 4 x 6-Watt RGBAW+UV LEDs to generate a powerful wash of color with a 20-degree beam angle, the fixture features a built-in rechargeable battery that offers up to 8 hours of continuous operation as well as ADJ’s WiFly EXR wireless DMX connectivity. Cleverly designed with a built-in variable-angle kick-stand and convenient carry handle, the unit is ideal for production companies, décor specialists and mobile entertainers.Optical:4 x 6-Watt RGBAW+UV LEDs (6-in-1 - Red, Green, Blue, Amber, White & UV)Life expectancy: rated at 50,000 hrs.LUX: >412@3M(9.8 ft.)Beam angle: 20-degreeConnection:12.6VDC Power InputWith Wired Digital Communication NetworkControl:Control protocol: WiFLY EXR wireless DMX5 DMX Channel modes: 6, 7, 8, 11 & 12Remote control: WiFLY EXR DMX and UC-IR5 Operational modes: RGBAW+UV Dimmer Mode; Sound Active mode; Auto Run Mode (16 color change modes, 16 color fade modes, & 1 color/fade combo mode); Static Color mode; and DMX ControlledFeatures:Selectable, English or Spanish User MenuBuilt-in kickstand to angle figure while it’s on the floorDMX menu touch screen display on rear panelBuilt-in WiFLY EXR wireless DMX: Up to 2,500 feet (760M) when used with ADJ’s WiFLY EXR Battery Transceiver63 built-in Color MacrosVariable RGBAW+UV color mixing offers a smooth, seemingly unlimited color palette - Great for Stage or Wall Washing!LED pulse and strobe effect (0.1Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleEnergy Save Mode to preserve battery lifeCarry handle and snoot to hide handle and LED lensesElectrical:Power Draw Total (All LED’s @ Full On): 45W, 0.5A @ 120V/60Hz, 42W, 0.2A @ 220V/50Hz,Multi-voltage operation: AC 100-240V, 50/60HzDimensions / Weight:Dimensions (LxWxH): 5” x 4.93” x 5.6” / 127 x 125 x 143mmWeight: 3.5 lbs. / 1.6kg.Battery:Battery Type: Fixed Lithium BatteryBattery Energy: 73.26WH (Watt Hours)Battery Weight: 0.42 kg.Battery Voltage: 11.1VBattery Capacity: 6.6AHTotal Lithium Ion Cells: 9 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 5 Hours (With POWER switch On)Battery Life: 4 Hours Full On, 6 and 8 HourEnergy Save operation modes (Full Charge)Certifications:IP20 Indoor rated

From the Element Par Series, the Element HEXIP is an IP54 outdoor rated battery powered LED Par with ADJ’s WiFLY EXR wireless DMX for outdoor or indoor use. It’s powered by 4x 10W RGBAW+UV (6-IN-1) LEDs. The Element Par Series are lightweight and easy to operate with a carry handle and kickstand for uplighting, staging, events, productions and any mobile application. No cables or wires needed!Optical:4 x 10-Watt RGBAW+UV LEDs (6-in-1 - Red, Green, Blue, Amber, White & UV)Life expectancy: rated at 50,000 hrs.LUX: 684 @ 2M; 171 @ 4MBeam angle: 20-degreePWM frequency:1000HzConnection:DMX: WiFLY EXR Wireless DMXIEC connection to power/charge fixtureControl:Control protocol: WiFLY EXR DMX5 DMX Channel modes: 6, 7, 8, 11, or 12Remote control: WiFLY EXR DMX, UC-IR, Airstream IR5 Operational modes: RGBAW+UV Dimmer Mode; Sound Active mode; Auto Run Mode (16 color change modes, 16 color fade modes, & 1 color/fade combo mode); Static Color mode; and DMX ControlledFeatures:IP54 Outdoor RatedBuilt-in kickstand to angle figure while it’s on the floor4-button DMX menu display on rear panel with water resistant hatchBuilt-in WiFLY EXR wireless DMX: Up to 2,500 feet (760M) when used with ADJ’s WiFLY EXR Battery Transceiver64 built-in Color Macros• Variable RGBAW+UV color mixing offers a smooth, seemingly unlimited color palette - Great for Stage or Wall Washing!LED pulse and strobe effect (0.2Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleEnergy Saving ModeBattery:Battery Type: fixed lithium batteryBattery Energy: 73.26WH (Watt Hours)Battery Weight: 0.42 kg.Battery Voltage: 11.1VBattery Capacity: 6.6AHTotal Lithium Ion Cells: 9 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 4.5 Hours (With POWER switch On)Battery Life: 11 hours (single color)Electrical:Power Draw Total (All LED's @ Full On): 45W, 0.5A @ 120V/60Hz, 42W, 0.2A @ 220V/50Hz,Multi-voltage operation: AC 100-240V, 50/60Hz Dimensions / Weight:Dimensions (LxWxH): 5.5” x 5.5” x 7.5” / 140 x 140 x 190mmWeight: 6.5 lbs. / 2.9kg.Certifications:IP54 Outdoor rated

The ADJ Lighting Modular Series LED Pars allow lighting designers more flexibility when it comes to features, plus more power to create brilliant washes for stages, installations or mobile events. The Mod Pars are “modular” in two ways. First, the body moves so that you can create a snoot to eliminate side glare if desired. Second, designers can remove the black metal housing and replace it with a pearl white housing kit. In this way, LED Par owners can switch between black or white fixtures depending on the application without having to inventory two different fixtures.The MOD HEX100 comes equipped with seven 15-Watt RGBWA+UV (6-IN-1) LED diodes (for a total output of 105W), a scissor yoke and three interchange frost filters that are easily replaceable by thumb screws. The 17-degree standard beam may be changed on the fly to 20, 40 or 60-degrees.Light Source:7x 15-Watt RGBWA+UV (4-IN-1 – Red, Green, Blue, White, Amber + UV) LEDs50,000 Hour Average LED LifeFeatures:Unique modular design: metal housing moves to offer a snoot to eliminate side glareBlack, gloss metal house may be removed and replaced with pearl white housing kit (sold separately)Includes 3 frost filters to change beam angle: 20-degree, 40-degree or 60-degreeScissor yoke includedOutput:Total Lumens:

The Par ZP120 RGBW is a modern LED twist to the traditional halogen Par Can. It has a silver polish exterior housing and is powered by a potent 115W quad C.O.B. LED (Chip On Board) LED with red, green, blue & white colors. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options.The Par ZP120 RGBW allows lighting and stage designers the look of the traditional stage par with the technological conveniences of modern day lighting. The advantages include low power draw, fixture and performers won’t get hot on stage, DMX control of dimming and strobe. There are no dimmer controllers need. The fixture comes with a gel frame in which diffusion filters may be inserted to further change the beam angle.SpecificationsOptical:115 Watt Quad RGBW LED (Red, Green, Blue & White)Life expectancy: rated at 50,000 hrs.Beam angle: 7, 11.5, 16, 20.5 0r 25-degree (manual adjustment) Connection:DMX: 5-pin DMX In/OutpowerCON In/Out to daisy chain fixtureControl:Control protocol: DMX-5126 DMX Channels (4/5/6/7/8/9 Ch. modes)64 Bult-in Color MacrosFeatures:Silver polish exterior housing4-button DMX menu display on rear panelAdjustable latch to manually change beam angleIncludes gel frame for diffusion filters (Diffusion filter sold separately)Strobe effect Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleElectrical:Power Draw Total (All LED's @ Full On): TBA Multi-voltage operation: AC 100-240V, 50/60Hz Daisy chain: TBA Dimensions / Weight:Dimensions (LxWxH): 19.5” x 11” x 9” / 491 x 275 x 224mmWeight: 8.5 lbs. / 3.9kg.

The ADJ Lighting Mirage Q6 Pak Black is an all-in-one event up lighting system with six (6) IP65 rated, for outdoor or indoor use, battery powered fixtures and a durable flight case with an on-board battery charging solution. Each Mirage Q6 IP Black fixture is powered by four (4) 10W RGBA LEDs that produce a 11-degree beam angle. The fixture is IP65 rated and is waterproof; suitable for temporary use outdoors with protection against the elements (rain, snow, dust and sand). Built-in WiFLY EXR wireless DMX allows for the fixtures to communicate with a lighting controller, also with WiFLY EXR wireless DMX, up to 2,500 feet (700M) away. Ideal for wall washing, Mirage Q6 IP Black fixtures are all fitted with an integral carry handle and built-in feet which mean they can simply be dropped in place and are ready to go. They also feature a built-in kickstand which allows the beam to be easily angled inwards towards a wall if required. This creates a more intense wash and minimizes light spill onto the ceiling above. Each fixture has an alarm system with on/off controls. If someone picks up the fixture with the alarm system on, the fixture will make a beeping sound and strobe in red. The robust battery will operate up to 40 hours on a single color (20 hours changing colors). The battery charge time is 7 hours.Specifications Mirage Q6 Pak includes:(6) MIRAGE Q6 IP Black Fixtures(1) MIRAGE Q6 FC Flight Case(6) MIRAGE Q6 IPCB Charging bases and power supplies(1) UC-IR Wireless Infrared Controller(1) IP65 Locking Power Cable Mirage Q6 Pak Features:Houses / Transports and Charges (6) MIRAGE Q6 IP™ BLACK fixtures MirageQ6 Pak Dimensions & Weight (with 6 fixtures):Length: 26.4” (671mm)Width: 18.2” (461mm)Vertical Height: 18.1” (459mm)Loaded Weight: 97.9 lbs. (44.4 kg) Pak Electrical & Thermal:Power Input: AC100VAC~240VAC, 50/60Hz IP65 Power Locking Input and OutputMax Power Consumption: 400 WattsPower Draw: 4ACharge status indicator14°F to 113°F (-10°C to 45°C) MIRAGE Q6 IP BLACK FIXTURE Source:4 x 10-Watt RGBA LEDs (4-in-1 - Red, Green, Blue & Amber)50,000 Hour Average Life**May vary depending on several factors including but not limited to:Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming. Photometrics:LUX: 9903 @ 2M; 2303 @ 4M Optics:11-degree beam angle Control & Connections:Control protocol: WiFLY EXR Wireless DMX11 DMX Channel modes: 4, 6, 7, 8, 9A, 9B, 10, 11, 12, 15 or 18 channelsRemote control: WiFLY EXR DMX, UC-IR24 (Included)5 Operation modes: RGBA Dimmer Mode; Auto Run Mode (13 programs, & 1 color/fade combo mode); Static Color mode; and Wireless DMX ControlContact Charging system. 6x Charging bases and power supplies included in flight case Features:IP65 Outdoor RatedBuilt-in kickstand to angle fixture when sitting on the floor4-touch button OLED display on rear panel Built-in WiFLY EXR wireless DMX: Up to 2,500 feet (760M) when used with ADJ’s WiFLY EXR Battery Transceiver64 built-in Color MacrosVariable RGBA color mixing offers a smooth, seemingly unlimited color palette - Great for Wall Washing!LED pulse and strobe effect (0.2Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 6 dim modes and 4 dim curvesRun all night – No duty cycleEnergy Save ModeBuilt-in alarm system with On/Off Battery charge indicator on each fixtureDie-cast aluminum housing Battery:Battery Type: Fixed lithium batteryBattery Energy: 162.8WH (Watt Hours)Battery Weight: 0.84 kg.Battery Voltage: 14.8VBattery Capacity: 11000mAh (Typical Capacity) Total Lithium Ion Cells: 20 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 7 HoursBattery Life: 14 hours (When color changing in Battery Saver Mode 14); 40 hours (When set to a single color in Battery Saver Mode 14) Battery Saver Mode 14 is available in software V1.03> Dimensions & Weight:Length: 143.2mmWidth: 143.2mmVertical Height: 211mmWeight: 4.01kg Electrical & Thermal:Power Input: DC 17.3VPower Draw: 2A40W Max Power Consumption (each unit)-10°C to 45°C

The ADJ Lighting Modular Series LED Pars allow lighting designers more flexibility when it comes to features, plus more power to create brilliant washes for stages, installations or mobile events. The Mod Pars are “modular” in two ways. First, the body moves so that you can create a snoot to eliminate side glare if desired. Second, designers can remove the black metal housing and replace it with a pearl white housing kit. In this way, LED Par owners can switch between black or white fixtures depending on the application without having to inventory two different fixtures.The MOD QA60 comes equipped with four 15-Watt RGBA (4-IN-1) LED diodes (for a total output of 60W), a scissor yoke and three interchange frost filters that are easily replaceable by thumb screws. The 17-degree standard beam may be changed on the fly to 20, 40 or 60-degrees.SpecificationsLight Source:4x 15-Watt RGBA (4-IN-1 – Red, Green, Blue & Amber) LEDs50,000 Hour Average LED LifeFeatures:Unique modular design: metal housing moves to offer a snoot to eliminate side glareBlack, gloss metal house may be removed and replaced with pearl white housing kit (sold separately)Includes 3 frost filters to change beam angle: 20-degree, 40-degree or 60-degreeScissor yoke includedOutput:Total Lumens:

The ADJ Encore Burst UV IP is a high intensity, IP65 outdoor rated UV Washer/Strobe with a 50W UV C.O.B.LED. The fixture is constructed of a rugged metal housing. The fixture features a 50-degree beam angle.The Encore Burst UV IP has different selectable dimming curves, strobe effect, 4-button LED menu system, IP65 rated, 5-pin DMX In/Out plus Seetronic IP65 power locking IN/Out connections to daisy chain power (rubber protective covers over all connections).Light Source:1x 50W UV C.O.B. LED50-degree Beam Angle50,000 Hour Average LED LifeFeatures:Multiple DMX Modes6 Dimming Curve Modes16bit Dimming: 0 - 100% Strobe & pulse controlDisplay: OLED display with 4-button touch menuConnections:Data Input: IP65 rated 5pin DMX In/Out (with protective rubber caps)Power Input: Seetronic IP65 power locking In/Out (with protective rubber caps)Safety Cable LoopScissor yoke with Omega bracket attachment Electrical:100-240V 50Hz/60Hz (Auto Sensing)Max Power Consumption: 118WIP65 RatedOutdoor Rated: protects from dust, sand, moisture, liquid. 6 (Protection against Dust); 4 (Protection against Water)Please note: you must use IP65 data and power cables in order for this fixture to be IP65 outdoor rated.Dimensions / Weight:Dimension (L x W x H): 342,7 x 226 x 153,2mmWeight: 3,8kgWhat’s Included:1x Omega Bracket1x Seetronic IP65 power locking cable

White Housing Kit for MOD 60 Series LED PARs :MOD QA60

The ADJ Lighting Modular Series LED Pars allow lighting designers more flexibility when it comes to features, plus more power to create brilliant washes for stages, installations or mobile events. The Mod Pars are “modular” in two ways. First, the body moves so that you can create a snoot to eliminate side glare if desired. Second, designers can remove the black metal housing and replace it with a pearl white housing kit. In this way, LED Par owners can switch between black or white fixtures depending on the application without having to inventory two different fixtures.The MOD QW100 comes equipped with seven 15-Watt RGBW (4-IN-1) LED diodes (for a total output of 105W), a scissor yoke and three interchange frost filters that are easily replaceable by thumb screws. The 17-degree standard beam may be changed on the fly to 20, 40 or 60-degrees.SpecificationsLight Source:7x 15-Watt RGBW (4-IN-1 – Red, Green, Blue & White) LEDs50,000 Hour Average LED LifeFeatures:Unique modular design: metal housing moves to offer a snoot to eliminate side glareBlack, gloss metal house may be removed and replaced with pearl white housing kit (sold separately)Includes 3 frost filters to change beam angle: 20-degree, 40-degree or 60-degreeScissor yoke includedOutput:Total Lumens:

The ADJ COB Cannon Wash ST is a shorter version of the popular COB Cannon Wash fixture. It uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash ST is a QUAD RGBA 4-In-1. It also doubles as an uplight with its scissor yoke that act as legs to set the fixture upright to wash walls and ceilings.The COB Cannon Wash ST comes in a black casing and has massive 80-degree beam angle. Easily replaceable 40-degree and 50-degree lenses are included so that the beam angle may be changed.It has 7 DMX Channel modes for programming flexibility, built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, 3- & 5-pin DMX and powerCON power daisy-chaining and a 4-button DMX display. COB Cannon Wash ST may run in its stand-alone mode from built-in programs, sound actively or from a DMX controller.OPTICAL:Light Source: 1x 150-Watt COB (Chip on Board) Quad LED (RGBA: 4-IN-1, rated at approximately 50,000 hrs)Light Output: 1970 LUX @2M; 474 LUX @4M (40-degree beam), 1472 LUX @2M; 373 LUX @ 4M (50-degree beam), 996 LUX @2M; 238 LUX @4M (80-degree beam)80-degree beam angleIncludes lens kit to change to 40-degrees or 50-degrees beam angleCONNECTIONS:3-pin & 5-pin connectors for DMX linkingpowerCon AC IN/OUT to daisy chain power (up to 5 fixtures)CONTROL:7 DMX Channel modes (3,4,5,6,7,9,10 Ch.)64 built-in color macros4-button digital DMX display on rear panelCompatible with wireless remote control (sold separately)LED pulse and strobe effectElectronic Dimming: 0 - 100%5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre)Refresh Rate:1KHzFEATURES:Flicker Free operation (No flickering on camera)Produces powerful, smooth RGBA color mixing with rich palettes of colorUse as Wash/par or Pixel Mapped for a stunning visual effectScissor yoke allows fixture to be mounted on truss or set on the groundOptional Barn Doors (BAR001) sold separatelyRun all night – No duty cycleELECTRICAL:Auto sensing power supply: AC 100V/60Hz - 240V/50Hz Power Draw: 132W maxDaisy chain up to 5 fixtures maximum DIMENSIONS / WEIGHT:Dimensions (LxWxH): 13” x 10” x 7.5” / 330x256x190mm (with bracket); 8.75” x 7.5” x 7.5” / 218.5x190x190mm (without bracket)Weight: 9 lbs. / 4.1 kg.

From the Element Par Series, the Element HEXIP Pearl is an IP54 outdoor rated battery powered LED Par in a white metal housing with ADJ’s WiFLY EXR wireless DMX for indoor or outdoor use. It’s powered by six 4W RGBAW+UV (6-IN-1) LEDs. The Element Par Series are lightweight and easy to operate with a carry handle and kickstand for uplighting, staging, events, productions and any mobile application. No cables or wires needed!Optical:4 x 10-Watt RGBAW+UV LEDs (6-in-1 - Red, Green, Blue, Amber, White & UV)Life expectancy: rated at 50,000 hrs.LUX: 684 @ 2M; 171 @ 4MBeam angle: 20-degreePWM frequency:1000HzConnection:DMX: WiFLY EXR Wireless DMXIEC connection to power/charge fixtureControl:Control protocol: WiFLY EXR DMX5 DMX Channel modes: 6, 7, 8, 11, or 12Remote control: WiFLY EXR DMX, UC-IR, Airstream IR5 Operational modes: RGBAW+UV Dimmer Mode; Sound Active mode; Auto Run Mode (16 color change modes, 16 color fade modes, & 1 color/fade combo mode); Static Color mode; and DMX ControlledFeatures:IP54 Outdoor RatedBuilt-in kickstand to angle figure while it’s on the floor4-button DMX menu display on rear panel with water resistant hatchBuilt-in WiFLY EXR wireless DMX: Up to 2,500 feet (760M) when used with ADJ’s WiFLY EXR Battery Transceiver64 built-in Color MacrosVariable RGBAW+UV color mixing offers a smooth, seemingly unlimited color palette - Great for Stage or Wall Washing!LED pulse and strobe effect (0.2Hz-11Hz)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleEnergy Saving ModeBattery:Battery Type: fixed lithium batteryBattery Energy: 73.26WH (Watt Hours)Battery Weight: 0.42 kg.Battery Voltage: 11.1VBattery Capacity: 6.6AHTotal Lithium Ion Cells: 9 piecesBattery Wrap Material: PVC sleeving + highland barley paperBattery Charge Time: 4.5 Hours (With POWER switch On)Battery Life: 11 hours (single color)Electrical:Power Draw Total (All LED's @ Full On): 45W, 0.5A @ 120V/60Hz, 42W, 0.2A @ 220V/50Hz,Multi-voltage operation: AC 100-240V, 50/60HzDimensions / Weight:Dimensions (LxWxH): 5.5” x 5.5” x 7.5” / 140 x 140 x 140mmWeight: 6.5 lbs. / 2.9kg.Certifications:CE ApprovedIP54 Outdoor rated

The Par ZP100 3K is a modern LED twist to the traditional halogen Par Can. It is powered by a potent 100W warm white C.O.B. (Chip On Board) LED with a color temperature of 3000K. Its output is comparable to a 1000W halogen sealed beam Par. It is equipped with 5 different beam angle options that may be changed by hand. powerCON In/Out allows for the fixture to be daisy chained, while 5-pin DMX control offers a variable strobe rate and 5 different dimming curve options. Its external housing is a traditional Par Can silver polished aluminum.The Par ZP100 3K allows lighting and stage designers the look of the traditional stage par with the technological conveniences of modern day lighting. The advantages include low power draw, fixture and performers won’t get hot on stage, DMX control of dimming and strobe. There are no dimmer controllers need. The fixture comes with a gel frame in which diffusion filters may be inserted to further change the beam angle.Optical:100 Watt COB Warm White LED (3000K)Life expectancy: rated at 50,000 hrs.LUX: 7135 (9°); 4440 (15°); 2236 (20°); 1266 (25°); 812 (30°)CRI: 90Beam angle: 9, 15, 20, 25 0r 30-degree (manual adjustment) PWM frequency:1200HzConnection:DMX: 5-pin DMX In/OutpowerCON In/Out to power battery or daisy chain fixtureControl:Control protocol: DMX-5122 DMX ChannelsFeatures:4-button DMX menu display on rear panelAdjustable latch to manually change beam angleIncludes gel frame for diffusion filters (Diffusion filter sold separately)Strobe effect (25Hz max)Flicker Free OperationElectronic Dimming: 0 - 100% with 5 dimming curvesRun all night – No duty cycleSilver polished aluminum exterior housingElectrical:Power Draw Total (All LED's @ Full On): 115W, 0.964A @ 120V/60Hz, 112W, 0.5A @ 220V/50HzMulti-voltage operation: AC 100-240V, 50/60Hz Daisy chain: 15 fixtures (120V); 25 fixtures (230V)Dimensions / Weight:Dimensions (LxWxH): 19.5” x 10.75” x 10.75” / 491 x 272 x 273mmWeight: 7.5 lbs. / 3.4kg.

The Saber Spot DTW is a compact spot fixture with a 15-Watt warm white LED. Features DMX-512, flicker-free operation, strobing, electronic dimming and has a 4-Button LED display system on the rear panel. Its built-in ACL lens produces a 20-degree beam angle. It features a dim to warm effect that replicates a halogen-like dimming profile.The Saber Spot DTW has a scissor bracket system that allows the fixture to be hung or set on the ground, and is ideal for performance stages, installations, table spotting, lighting retail stores.Optical:Light Source: 15-Watt Warm White LEDLED Life Expectancy: 10,000 Hrs Beam Angle: 20-degreesIncludes 2 interchangeable frost filter lens Color Temperature (Full on): 3100K (Warm White); 1900K (Amber)LUX: 726 @ 3MCRI (Full on): 92Control:3 DMX Channel Modes: 1, 2 or 4 4-button Digital Display for easy navigationElectronic Dimming 0 – 100%5 Dimming Curve modesDim to warm effect with Amber LEDFlicker Free (Refresh Rate: 3.6KHz)Variable Strobe: 1-20HzConnections:Power Input: powerCONPower Pass through: powerCONDaisy chain quantity: 33 fixtures (@120V); 71 fixtures (@230V)Control: 3-pin DMX In/Out pigtailsElectrical:Input Voltage: 100-240V 50Hz/60Hz (Auto Sensing)Power draw 120V 60Hz: 15W, 0.13 AmpsPower draw 220V 50Hz: 15W, 0.07 Amps Power Consumption: 24WPhysical: Dimensions (LxWxH): 3.5” x 6.75” x 3.5” / 88 x 170 x 87mmWeight: 2.6 lbs / 1.2 kg. Metal Black Housing Certifications:ETL Approved, UL, CEIP 20: Dry area, No liquids

The Saber Bar 6 is a 6-head pinspot lighting system mounted on a 1-meter linear base with built-in power and DMX connections. Each pinspot is similar to the Saber Spot WW with a 15W Warm White LED (3100K) and an ACL lens that produces a razor sharp 4-degree beam. Each fixture’s X/Y axis may be individually adjusted manually for precision angling of the beams. There are two heavy duty adjustable brackets to mount the fixture to a ceiling or truss.The rear panel features a display with function buttons, 3-pin and 5-pin DMX In/Out to link data and power locking In/Out connections to daisy chain power. There are multiple DMX channel modes to choose from, built-in programs and 6 dimming curve modes. The Saber Bar 6 is s ideal for performance stages, installations, table spotting and lighting in retail stores.Light Source:LED: 6x 15W Warm White LEDs (50,000 hr.)Color Temperature: 3100KCRI: 96Beam Angle: 5-degreesFeatures:All metal construction with black housingACL lens for razor sharp beamsIncludes heavy duty adjustable brackets for hangingIndividually adjust X/Y axis of each fixture manuallyConstruction:Display with function buttons Data In/Out: 3-pin and 5-pin DMX In/Out to link dataPower locking In/Out connections to daisy chain powerDaisy chain up to 11 fixtures @ 120V; 12 fixtures @ 240VControl:Multiple DMX channel modesControl Modes: DMX512, RDMBuilt-in internal programs0-100% Dimming + smooth 16-bit fine dimming6 Dimming Curve ModesAdjustable LED refresh rateStrobe & Pulse effectsElectrical:Power voltage: AC100-240V, 50/60Hz (Multi-voltage)Power consumption: 85W maxDimensions & Weight:Dimension (LxWxH): 39.5” x 11.5” x 3.75” / 1015x292x90mmWeight: 25 lbs. / 11.3 kg.