Peripheral Equipments


Here you will find devices, controllers for adjusting and setting the audio signal and other accessories

TOPSELLER



Topseller

RCF RDNet Control 8 8 output Master Unit
The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations. The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc. Data transfer can be routed also through the provided xlr connectors enabling the control of the system on traditional multi-cored cables.FEATURESETHERNET (REMOTE CONTROL) AND USB (DIRECT CONTROL) PC CONNECTION TO RDNETCONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICESALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECONDAUTO DETECT DEVICE PLACEMENTControlling slave devices status and functionsMonitoring and displaying faults and warnings sent from slave devicesStoring subnet user filters configuration in a removable memory cardGENERAL SPECIFICATIONSNumber of subnets: 8Connectors: RJ 45, XLRMax number of devices (for each subnet): 32Configuration: PC softwarePC connection: USB (type B), EthernetData storage: SD card (max. 4 GB)Operating voltage: 90-240 V~ 50/60HzPower consumption (W): 15RDNet: YesSTANDARD COMPLIANCECE compliance: YesPHYSICAL SPECIFICATIONSCabinet/Case Material: MetalColor: BlackRack mounting: 19", 1USIZEHeight: 44 mm / 1.73 inchesWidth: 482 mm / 18.98 inchesDepth: 182 mm / 7.17 inchesWeight: 2.71 kg / 5.97 lbs

€1,699.00*

Immediately available or ready for collection
Denon Pro DN-200BR Stereo Bluetooth® Audio Receiver
Balanced XLR and 6.3 mm jack outputsUp to 33 m rangeBluetooth receiverSolid high-quality product for installations

€129.00*

Immediately available or ready for collection
Linea Research ASC48 FIR Audio Controller
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.

€1,990.00*

delivery time 7 days
Linea Research ASC48 FIR Audio Controller with Dante Card
ASC48 FeaturesFour input channels and eight output channelsNo compromise audio performanceUnique, precise, 96kHz Digital Signal ProcessingAnalog, AES3 and Dante™ / AES67 (option) inputs and outputsEthernet remote control via Linea’s System Engineer PC applicationFull front panel user interface offers simple intuitive local operation3rd party control via contact closure ports allow easy system integrationOEM friendly with flexible parameter hidingFully designed and engineered by Linea’s in-house development teamManufactured, tested, and supported entirely in the UKThe Advanced System Controller from Linea Research is a high performance and easy to use signal processor for sound systems. With processing for 4 inputs and 8 outputs it takes advantage of the latest analogue to digital conversion and DSP technologies to deliver flawless audio that out classes its competition.The advanced 96kHz DSP provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.Supporting analogue AES3 and Dante™ inputs and having both analogue and AES3 outputs, all under full remote control, makes the ASC48 suitable for use in the most demanding applications, especially when flexibility is paramount.When used as a loudspeaker management system or digital crossover, the ASC48 brings state-of-the-art facilities and performance, however the ability to receive, process and transmit audio without it leaving the digital domain makes the ASC48 an ideal central controller for large systems, even when amplifiers with in-built DSP are being employed.Ethernet is used for remote control while a front panel, optimised for use in challenging environments, allows full local control of all features. Control via Linea’s intuitive System Engineer application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system.

€2,490.00*

delivery time 7 days
Ground Loop Isolator
High Quality Ground Loop Isolator2x RCA plug male / 2 x RCA plug female, perfect for eliminating hum - and overtone signals, deletes disturbing noises of computers, laptops and DVD players, earthing loop isolator Size: cylinder 60x35mmTotal lenght of cable : 60cm

€9.40*

Immediately available or ready for collection
Alto Stealth Wireless MK2 Audio
2-CHANNEL UHF RADIO SYSTEM FOR ACTIVE SPEAKERSAdds a wireless audio connection to any active speakerDual channel transmitter (x1) with two XLR+6.35mm TRS inputsSingle channel receiver (x2) with a 1/4" TRS output (per unit)Replaces up to 200 feet of console-to-system cablingReliable UHF frequency band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceExpand your system with the Stealth Wireless Expander Pack (sold separately)Technical specifications:Channel:Frequency Response: 50Hz - 17kHz, ±3dBFrequency range: 863-865 MHz (EU / UK) (depending on region)Channels: Up to 100+ selectable UHF frequency bands (depending on region)Wireless range: 61 metersBandwidth: 863-865MHz: 2MHzOscillation type: PLLFrequency Stability: ±0.005%Frequency Deviation: ±20kHzInputs: 2 XLR and 1/4" TRS combo inputsPower supply: 12V, 500mADimensions: (Width x Depth x Height) 180mm x 99mm x 35mmWeight: 302gRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g

€475.00*

delivery time 14 days
Bluetooth Ultimate Radio transmission system for active speakers Bluetooth
Bluetooth Ultimate is a stereo Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Ultimate, you can quickly and easily add stereo Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR inputs of a mixer or powered speaker setup, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Ultimates together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Ultimate running for over 6 hours. Bluetooth Ultimate is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerLink two together for cable-free stereo playback*Dual XLR outputs for wired stereo playback*100+ft rangeXLR on front and backUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Ultimate, or the Alto Professional Bluetooth Total 2, both sold separately. Original Bluetooth Total is not supported. Additional XLR cable not included.

€79.00*

Immediately available or ready for collection
Bluetooth Total MKII Radio transmission system for active speakers Bluetooth
Bluetooth Total is an XLR-equipped, rechargeable Bluetooth receiver that streams audio wirelessly to mixers or powered loudspeakers. With Bluetooth Total, you can quickly and easily add Bluetooth to any live sound setup. Plug Bluetooth Total into the XLR input of a mixer or powered speaker, pair your Bluetooth device, and that’s it! You can also wirelessly link two Bluetooth Totals together to accommodate larger speaker setups. A built-in, rechargeable battery keeps Bluetooth Total running for over 6 hours. The Bluetooth Total is a valuable tool that no audio professional should be without. Add Bluetooth to any speaker or mixerWirelessly link two together for cable-free stereo playback*XLR-equipped connection100+ft rangeUSB micro rechargeable battery (6+ hours)*This product can wirelessly pair to another Bluetooth Total 2, or the Alto Professional Bluetooth Ultimate, both sold separately. Original Bluetooth Total is not supported

€49.00*

Immediately available or ready for collection
Alto Stealth Wireless Expander MK2 Kit
ADDITIONAL STEALTH WIRELESS MKII RECEIVERExpands your existing Stealth Wireless MKII systemSingle channel receiver with a 1/4" TRS output (per unit)Reliable UHF band; up to 100+ selectable channels (depending on region)Adjustable squelch eliminates interferenceRECEIVERSensitivity: -100dBmImage rejection: 70 dBT.H.D. 0.05% @ 1kHzOutput 1: 1/4" TRSOutput Impedance: 600 ohms balancedPower Supply: 12V 500mADimensions: (Width x Depth x Height) 72mm x 28mm x 118mmWeight: 162.5g

€149.00*

Immediately available or ready for collection
Omnitronic LH-045 microphone preamplifier
OMNITRONIC LH-045 Microphone 1-channel preamplifier 1 microphone, XLR (bal.) or 6.3 mm jack (unbal.) Gain control, 10 steps (6-50 dB) Phantom power can be switched on Clip LED 1 line output, XLR (bal.) or 6.3 mm (unbal.) Operation via supplied power unit Power supply: 12 V DC, 150 mA Input impedance: 10 kohms bal./unbal. Max. input level: +4 dB bal./+10 dB unbal. Gain: 50 dB XLR/44 dB jack T.H.D.: 0.01 % Frequency range: 25 Hz - 16 kHz S/N ratio: >75 dB Dimensions: 143 x 93 x 45 mm Weight: 350 g

€76.20*

delivery time 14 days
OMNITRONIC LH-061 PRO Passive Dual DI Box
Passive 2-channel DI box/splitter, blackPassive 2-channel DI box with split mode2 high-impedance signal inputs via two 6.3 mm jacks2 low-impedance XLR outputs2 feed-through outputs (6.3 mm jack)Converts 2 separate unbalanced line inputs (e.g. CD player, instruments) into 2 balanced XLR outputs, for connecting a mixerSwitchable input attenuation: 0 dB, -20 dB, -40 dBgroundlift selectorCables can be routed under the housingPackage contents1 x user manual, 1 x deviceTECHNICAL SPECIFICATIONSFrequency range: 15 - 30000 HzImpedance: Input: 50 kOhmOutput: 600 OhmInput attenuation: 0 dB, -20 dB, -40 dB; switchableConnections: Input: 2 x 6.3 mm jack socket (mono) mounting versionOutput: line via 2 x 3-pin XLRLink: 2 x 6.3 mm jack socket (mono) mounting versionMax. level: Output: +6 dBuDimensions: Width: 13,3 cmDepth: 11,5 cmHeight: 5,4 cmWeight: 610 g

€49.00*

delivery time 14 days
LH-053 DI-Box passive
Passive DI box1 high-impedance signal input, 6.3 mm jack1 low-impedance XLR output1 instrument feed-through output, 6.3 mm jackConverts an unbalanced line input (e.g. instruments) into a balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dBGround-lift switch eliminates signal interference and ground loop problemsRugged black metal housingFrequency range: 15 Hz - 30 kHz Input impedance: 50 kohms Output impedance: 600 ohms S/N ratio: >95 dB Input connector: 6.3 mm jack, unbal. Output connectors: XLR, bal. 6.3 mm jack, unbal. (parallel out) Dimensions: 127 x 74 x 45 mm Weight: 430 g

€21.00*

delivery time 14 days
QPRO Audio QLM 2.4N Digital loudspeaker controller 2in/4out
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 2 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 4 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 192kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:

€799.00*

Immediately available or ready for collection
QPRO Audio QLM 4.8 Digital loudspeaker controller 4in/8out
the QLM-Series are powerful DSP based loudspeaker management system, ideally suited for install and rental application, where outstanding sound quality and a remote control software with extensive functions is needed.The QLM-Series has two devices with 2IN - 4 Out channles and 4 In - 8 Out channels.Each output has a gain control, variable delay, highpass and lowpass crossover filters, seven band multi-type filters, polarity, input signal source an limiter. The crossover filters offer stopes of up to 48dB/Octave.Each input has a gain control, variable delay, multi-type filters, Filter type included parametric equalisation, high & low shelving, notch, band-pass, all-pass, variableQ highpass & lowpass.The internal structure allows completely flexible routing of any output from any combination of inputs.Beside the normal possibliity to store and load q preset, the QLM-Series also provides a unique storage function where it is possible to store and load single speakers. This allows to combine any speaker from our QPRO datebase together.For remote control the QLM-Series providea USB, and RS 485 port.Security lock is avable for each partsInputs: 4 electronically balancedImpedance: > 10k ohmsCMRR: >75 dB 50Hz - 10kHzOutputt: 8 electronically banancedSource Imp: < 60ohmsmin. load: 600ohmmax. Level: +20dBuDigital Audio Sample Rate: 96kHzFrequenz Response: +- 0,5 dB, 20 Hz - 20 kHzDistortion:< 0,004 % @ 1kHz, +15dBuADC Dynomic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)DAC Dynamic Range: > 114dB, 20 Hz - 20 kHz (A-Weight)Latancy: 0,66mSDelay 1500mS (input), 1500ms (Output)Min Step Size: 0,010mS (4mm)Input Gain: -40dB to +6dB in 0,1dB stepsOutput Gain: -40dB to +15dB in 0,1dB stepsParametric Filters:10 per Input, 10 per OutputFreq. Fange: 20Hz - 20kHz, 1/36 Octave stepsFilter Q/BW: 0,4 to 128Filter type: Parametric Equaliser, HiShelf, LoShelf, Lowpass, variable Q Highpass, Bandpass, Notch, Allpasshigh and Lowpass FilterFreq. Rang: 20Hz - 20kHz, 1/36 Ictave stepsSlope: 6/12/24/36/48 OctaveType: Butterworth, Linkwitz-Riley, BesselLimitersThreshold: -20 - +20dB. 1dB stepsAtack time: 1 - 100mSReleas time: 0,1 - 2,0 secondDisplay: 2x20 Character LCDRemoteUSB/RS 485Power: IECMain Voltage: 220V @ 50/60HzPower Consumption:

€1,299.00*

Immediately available or ready for collection
LH-051 Dual phantom power adapter
LH-051 Omnitronic Dual phantom power adapter Phantom power for 2 microphonesPhantom power supply for condenser or electret microphones Selectable +12/ +48 V power supplyIdeal accessory for mixers without phantom powerInputs and outputs via balanced XLR connectorsOperation via 2 x 9 V block battery or power unit (not included)Power supply: 12 V DC or 2 x 9 V blockOutput voltage: +12 V/ +48 V DC, ±2 V DCInput impedance: 600 ohmsOutput impedance: 600 ohmsDimensions: 143 x 93 x 45 mmWeight: 485 g

€76.20*

delivery time 14 days
Rane DR6IM Touchscreen Remote
The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired. Ability to use custom background images and logos in full-color on the 7-inch LCD display.Screw the included wall-mount bracket over U.S. (or international) electrical boxes, or flush-mount the DR6 with the bracket, and cut a 2 (5 cm) square hole in the wall to accommodate the cable.Optional, on-screen User Access logins secure management pages from public or staff use, and a programmable ambient light sensor automatically dims the backlight. The Control Page Designer in Halogen allows the user to create one set of pages and use them in a web control design, DR6 display or both.FeaturesFully customizable touchscreen controllerElectrical box or wall flush-mount optionsSupports multiple pages or tabs and any set of levels, toggles, selectors and/or commandsDrag, drop and resize controls as desiredRANE RPI (Remote Power Injector - not included) required for use withHAL3s and legacy HAL multiprocessorsIn the BoxDR6Wall-Mount BracketUser GuideSafety & Warranty Manual

€269.00*

Immediately available or ready for collection
Boss AB-2 2-Way Selector
PRACTICAL AND AFFORDABLE A/B SELECTORThe BOSS AB-2 is a practical helper when switching the equipment: you can, for example, switch two guitars in front of an amplifier. Or you can use the AB-2 to switch between two amps (or an amp and a tuner) with a guitar. Many guitarists are already familiar with the shape and size of the popular and proven BOSS footswitch FS-5U (silver) and the footswitch FS-5L (black).Switches either two inputs to one output or two outputs to one inputSwitching by active electronics: no switching clicksNo influence on the switched signals (-20 dBU inputs and outputs)Display of the switching status by red LED (Channel A) and yellow LED (Channel B)Current consumption only max. 5 mAPowered by 2x micro batteries (AAA size)Operating time with simple zinc-carbon batteries approx. 100 hours!Housing size as with the well-known BOSS FS-5U footswitches and BOSS FS-5L footswitchesCheap price!Nominal input level: -20 dBuNominal output level: -20 dBuControlPedalIndicators: A (red), B (yellow)Connectors: A jack, B jack, IN/OUT jackCurrent consumption: 5mA or less* Expected battery life for continuous use: Carbon: 100 hours* This value varies depending on the actual usage conditions.Power Supply: Dry battery [Type R03/LR03 (AAA)] x2Accessories: Instruction manual, dry battery [Type R03/LR03 (AAA)] x 2, number sticker

€52.00*

Immediately available or ready for collection
dbx DriveRack PA2
DBX DRIVERACK PA2digital speaker management system31 Band grafic equalizerparametric 8-Band input-EQ with auto EQ function, peak stop limitercrossovercompressorsubharmonic synthesizeroutput-delay up to 3,4 m/10 ms,input-delay up to 34 m/100 msfeedback-destroyer with 12x notch-filters 1/80 octaveparametric 8-band output-EQ also for speaker tuningsthird-band real time analyzerpink noise generatorremote control with Mac/Windows/Android/iOS2x XLR input,1x XLRwith 48V phantom power for optional measurement microphone6x XLR male outputsethernet connectorUSB connector19" 1U

€515.00*

Delivery time from 6 to 8 weeks!
dbx 131S graphic equaliser 1x 31-band
dbx 131s Graphic Equalizer - 1x 31-band+/- 6/12dB gainoutput meterswitchable bypassclip LED, 50Hz low cut filter (12dB/octave)20mm faders>108dB dynamic range6/12dB switchbalanced jack/XLR in/outinternal power supplyDimensions: 19"/1U

€205.00*

Immediately available or ready for collection
dbx Crossover 223XS Stereo 2-way
dbx 223Xs - active Crossover - 2-way stereo or 3-way mono crossover24dB Linkwitz-Rileymono sub out, input/LF/HF gain controlsfactor selection (10x)phase reverse functionswitchable 40Hz HP filterbalanced XLR in/outinternal PSUDimensions: 19"/1U

€225.00*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails