König & MeyerK & M 19757Strength and stability! The mobile table stand for your iPad Air 2. The iPad Air 2 is held safely and securely thanks to the sturdy steel base. With this high-quality table stand, you can easily read, write, surf the Internet or just view pictures or videos without any vibrations. The iPad Air 2 clips in and out of the holder effortlessly. An easy-to-use wing nut adjusts the tilt so that every user can adapt the viewing angle to suit them optimally. The iPad Air 2 can be rapidly switched between the vertical and horizontal format without slipping. Bearing Plate: 249 x 178.7 mm Adjustment: stepless Material: plastic, steel iPad Air 2 is easily clipped into the holderlightning connector and headphone jack are accessiblefreely rotates 90°suitable for iPad Air 2
Stepless (without fixed increments) adjustment of inclinationRotates for horizontal and vertical position3/8" Internal threadWidth of the tablet: 129 mm to 232 mmHeight of the tablet: 222 mm to 331 mmThickness of the tablet: 6 mm to 11 mmWeight: 0.27 kgColour: BlackSuitable for the following tablets (among others):iPadiPad AiriPad ProiPad Pro (12.9")Amazon Fire HDX 8.9Samsung Galaxy Tab from 9.7Google Nexus 9Asus TransformerMicrosoft Surface and Surface ProDelivery without tablet
K & M 19791 Universal Tablet PC holder blackTablet sizes adjustable without toolsBracket for tubes up to 30 mm diameterHeight 222-342 mmWidth 128-232 mmThickness of the tablet 5-11 mmStepless adjustment of the tilt, rotate for landscape and portrait modesWeight 0.6 kgSuitable for:iPadiPad AiriPad ProAmazon Fire HDX 8.9Samsung Galaxy Tab from 9.7Google Nexus 9Asus TransformerMicrosoft Surface and Surface ProWeight: 0,75 kgColour: black
K&M 19777 iPad Air 2 Tripod2 piece folding tripod iPad Stand for iPad Air 290° RotateableEasy Click SystemAdjustable hight between 70 - 155 cmMax. Load 1,0 KgPlate: 252,1 x 195,4 mmWeight: 2,1 kgColor: Black
König & MeyerK & M 19855With this elegant universal tablet pc stand made out of high sheen, deep black acrylic glass, your tablet has a prominent spot on your desk. Two grip pads hold the tablet in place (without adhesives and magnets), you can choose between vertical and horizontal placement. The tablet is easy to place into and remove from the stand. To reactivate the grip pads simply clean them with water. The 45° angle provides for the viewing of videos and photos and for surfing and typing. The stand is equipped with two non-slip pads on the bottom of the stand. Gentle grip pads Material: Acrylic Dimensions: 130 x 80 x 140 mm
K&M 19747 smartphone holder
Material: Plastic
Can be screwed on up to: tube ø 30 mm
Version: black
Special feature: Particularly suitable for smartphones, flat devices and MP3 players; Control elements are not affected in their function; rotatable by 360°; Flexible holding arm for individual alignment
Width: from 60 to 84 mm
Weight: 0.225 kg
K&M 19748 smartphone holder
Version: black
Special feature: particularly suitable for smartphones,
flat devices and MP3 players
Control elements are not affected in their function
rotatable by 360°
Flexible holding arm for individual alignment
Width: from 60 to 84 mm
Thread connection: 3/8"
Material: Plastic
Weight: 0.21kg
Heavy duty laptop standFoldableCompact LightweightThis laptop stand is ideal for digital Dj's. It is steady, lightweight and set-up in only 2 handlings. The feet can be placed under a mixer and your laptop is exact where you need it to be. When it's folded it is very compact and will fit easily in a backpack together with a laptop. Dimensions folded: 320 x 320 x 55 (WxDxH)Upper plate: 220 x 230mm (WxD)Baseplate: 170 x 260mm (WxD)Height: 370mm (fixed)Weight: 0.85Kg Material: Aluminium
K&M 19744Tablet PC Stand holder BiobasedAngle of inclination: 0° to 90°Height: from 158 to 280 mmMaterial: Bio-based plasticSpecial features: also suitable for tablets in cases orprotective covers;freely rotates 360°Suitable for 3/8" and 5/8" threadType: blackWeight: 0.434 kgWidth from 150 to 330 mmUniversal tablet holder with a practical clamping mechanismfor all tablets with an approx. size of 10" to 16". The tabletmount is made of bio-based plastic. These plastics contain aproportion of over 50% up to 100% of renewable plant-basedraw materials. The use of renewable raw materials helps toconserve limited petroleum resources and reduce harmfulCO2 emissions. More info on bio-based plastics at:bioplastic.k-m.de. The clamping range of the tablet standholder is between 158 and 280 mm. The holder is alsoparticularly suited for tablets with a protective cover or case upto 20 mm thickness. The overlapping clamping jaws withintegrated rubber pads provide for a secure hold and eliminateunwanted vibration noises. The function of the operatingelements on the device is not impaired. An adjustablemounting bracket with felt padding provides additional safetywhen the tablet holder is positioned vertically and prevents thetablet PC from falling out even under heavy use. The holdercan be swivelled and tilted, allowing each user to position itindividually. The swivel movement can be adjusted from easyto tough via a clamping screw. The tablet holder can berotated between portrait and landscape format without furtherado, whereby independent turning is prevented. Whether onstage, in the rehearsal room or at home - thanks to the 3/8" or5/8" internal thread, the holder can be easily screwed ontoany microphone stand or similar.
Stylish and practical holder for smartphones and tablets with table clamp. Holder accommodates devices from 10.2 to 13” in size, corresponding to a clamping range from 130 to 224 mm. The brackets and mounting surface are coated with non-slip rubber for added stability and peace of mind and a gentle grip. Ball-shaped head allows infinitely variable, individual positioning. The extension arm rotates 360° and can be adjusted individually in angle, height, and swivel range. The clamping range of the table clamp is from 10 to 35 mm. The clamp surfaces are coated with rubber, protecting the table from damage.Adjustment: steplessClamping range: up to 35 mmMaterial: plastic, steelSpecial features: rotates freely 360°; can be adjusted individually in angle, height, and swivel rangeSwivel: 360 °Type: blackWeight: 0.79 kgWidth: from 130 to 224 mm
Useful desktop camera stand for mounting compact cameras, action cameras, web cams, mini-projectors and mobile recorders with a 1/4" connection thread. The ball joint allows the mounted equipment to be rotated 360° and fixed in any position. The height can be freely adjusted from 280 mm to 488 mm via two clamping levers. The tilt-angle is infinitely adjustable up to 90° and the load capacity is designed for equipment up to 1 kg. For transport, the tripod folds compactly to save space.Angle of inclination: 0° to 90°Base diameter: 250 mmHeight: from 280 to 488 mmHeight adjustment: infinitely variable by means of ergonomically shaped clamping elementsLeg construction: square tube legs snap into socketMaterial: steelMax. load capacity: 1 kgRod combination: 2-piece folding designSize when folded: 279 x 62 mmSpecial features: easy-to-use clamping levers; 360° rotatableThreaded connector: 1/4"Type: blackWeight: 0.53 kg
Black, heavy duty, universal tablet holderSuitable for most tablets upt tp 13" displayStrong flexible goose neckRotatable tablet mountOption to be mounted directly on to your microphone standThe OTBH-DLX tablet holder comes with a sturdy, adjustable gooseneck incl. a heavy-duty clamp. Thanks to the built-in 5/8 thread you can also mount it directly on to your microphone stand.
HERCULES HCDG-307B 2-in-1 tablet & mobile phone holderSuitable for tablets & smartphones with a diagonal of 15.5 - 33 cm (6.1 "- 13")1/4 "-20 tripod threadTo be attached to 3 cm (1.18 ") tables, round and rectangular polesThe cover or retaining ring does not have to be removedWeight: 570 gmax.load: 3 kg
K&M 19777 iPad Air 2 Tripod2 piece folding tripod iPad Stand for iPad Air 290° RotateableEasy Click SystemAdjustable hight between 70 - 155 cmMax. Load 1,0 KgPlate: 252,1 x 195,4 mmWeight: 2,1 kgColor: Black
Angle of inclination: 0° to 90°Height: from 158 to 280 mmMaterial: Bio-based plastic, steelScrew-on to: tube diameter up to 30 mmSpecial features: also suitable for tablets in cases or protective covers; freely rotates 360°; can also be screwed on to 3/8" thread connectorsType: blackWidth: from 150 to 330 mmUniversal tablet holder with a practical clamping mechanism for all tablets with an approx. size of 10" to 16". The tablet mount is made of bio-based plastic. These plastics contain a proportion of over 50% up to 100% of renewable plant-based raw materials. The use of renewable raw materials helps to conserve limited petroleum resources and reduce harmful CO2 emissions. More info on bio-based plastics at: bioplastic.k-m.de. The clamping range of the holder is between 158 and 280 mm. The holder is also particularly suited for tablets with a protective cover or case up to 20 mm thickness. The overlapping clamping jaws with integrated rubber pads provide for a secure hold and eliminate unwanted vibration noises. The function of the operating elements on the device is not impaired. An adjustable mounting bracket with felt padding provides additional safety when the tablet holder is positioned vertically and prevents the tablet PC from falling out even under heavy use. The holder can be swivelled and tilted, allowing each user to position it individually. The swivel movement can be adjusted from easy to tough via a clamping screw. The tablet holder can be rotated between portrait and landscape format without further ado, whereby independent turning is prevented. The holding arm with clamping element is suited for attaching to tubes for up to 30 mm in diameter.
König & MeyerK & M 19724The clever way to display your iPad Air. The connector holds an iPad Air securely and comfortably. Whether on stage, in the rehearsal room or at home - the strong prismatic element with its ergonomic clamping screw allows the iPad Air holder to be attached quickly and easily to any tubes up to 30 mm diameter. The iPad Air snaps in and out of the holder effortlessly. The pivoting range is second to none, allowing the user the iPad Air position of their choice. The swivel movement can be adjusted from free to resistant. The iPad switches rapidly between the vertical and horizontal format without slipping. Bearing plate: 249 x 178.7 mmMaterial: Plastic, SteelTo be attached to tubes up to 30 mm diameter; iPad Air is easily clipped into the holder; lightning connector and headphone jack are accessible; freely rotates 90°; alternatively: can be screwed on to 3/8" thread connectors; suitable for iPad Air
K&M 19765 tablet PC holder »Biobased«
can be screwed on a pipe up to a diameter of 30 mm
Version: black
Special feature: also suitable for tablets in case or
protective cover
can optionally also be screwed onto all 3/8" threads
not rotatable
Height: from 155 to 307 mm
Material: bio-based plastic, steel
Tilt: 0° to 90°
Weight: 0.58 kg
For iPad Air 2 To attach on pipes up to Ø 30 cmmiPad Air 2 is simply snappedLightning Connector and Headphone Connection is exposed90° Rotatable You can srew it optionally on all 3/8" threadsMaterial: Plastic, SteelSvivel Range: 90°Mounting Plate: Srewable up to: 249 x 178,7 mm
HERCULES HCDG-207B smartphone holder, cold shoe adapter for light, thread for cameraSuitable for smartphones with a diagonal of 12 - 17.5 cm (4.7 "- 6.9")1/4 "-20 tripod threadIntegrated "cold shoe" adapterTo be attached to 3 cm (1.18 ") tables, round and rectangular polesThe cover or retaining ring does not have to be removedWeight: 320 gmax.load: 1 kg
iPad holder for microstandsHorizontal and vertical stand Fits iPad 1 & iPad 2Heavy duty2 Swivel pointsThis iPad holder has 2 swivel points to adjust the iPad in your desired position. Dimensions: 245 x190 x 193 (LxWxH)Weight: 0.3 kg
For attaching to tubes up to 30 mm in diameterCan also be screwed onto any 3/8" threadRotatable by 90°Infinitely adjustable (no fixed increments) to adapt to different tablet sizes without toolsMaterial: Plastic and steelWidth: 102 - 189 mmHeight: 163 - 242 mmDepth: 5 - 11 mmWeight: 0.697 kgColour: Black
The combination of the stand and the Universal Tablet Holder supports you on stage, at home or in the studio. The individually adjustable support arms can accommodate the use of tablets ranging in height from 222 to 334 mm and width from 128 to 232 mm (for example iPad, iPad Air, iPad Pro, Amazon Fire HDX 8.9, Samsung Galaxy Tab from 9.7, Google Nexus 9, Asus Transformer or Microsoft Surface as well as Surface Pro). The depth of the tablets can vary between 6 and 11 mm. For the first use of the tablet holder the support arms settings are made by adjusting the clamp screws to the size and depth of the tablet. For other uses the tablet can be attached and detached quickly and simply through a snap lock. A handy wing nut allows one to adjust the angle, so that each user will easily be able to find their ideal individual position. The tablet can switch between portrait and landscape positions. The tablet is kept in place, there is no danger of the tablet switching position by itself. The light and expandable stand can be adjusted to any height between 70 and 155 cm. A small and compact footprint makes this stand easy to transport.- 2-fold extendable- Width: from 128 to 232 mm- Height from 222 to 334 mm- Depth: from 6 to 11 mm- rotatable by 90 °- Inclination: 0 ° to 90 °Weight: 1.73 kg
€70.80*
Immediately available or ready for collection
Subscribe to newsletter
This website uses cookies to ensure the best experience possible. More information...
