Dual 10-inch woofers with 700 watts RMS class D power amplifier. Part of the Imperio Mini Line Array SystemAvante Audio's Imperio mini line array system is a great solution for small to mid-sized venues and can be expanded by adding additional Imperio units as your needs require. The Imperio system consist of the Imperio mid/high unit which features dual 4.75" woofers and 6 inverted dome tweeters (IDVAT - Inverted Dome Vertical Array Technology) HF drivers, a 240 watt RMS class D power amplifier, and 24 bit DSP, the Imperio sub which has a 10" woofer along with a 350 watt RMS class D power amplifier and for when more bass is required, we recommend the Imperio SUB210 which features dual 10" woofers with 700 watts RMS (2 x 350 watt RMS, 2100 watt peak) class D power amplifierImperio accessories include: Imperio Flybar Lg, Imperio Flybar Small, Imperio Pole w/mounting bracket, LinkPin Kit4AMPLIFIERPower (RMS): 700W, 1400W Peak100-120V / 220-240V ~ 50/60Hz (country specific)LED Power / Signal / Clip IndicatorInput: 1x 3pin XLR powerCon (NAC3FCA)Output: 1x 3pin XLR powerCon (NAC3FCB)Phase Switchable (0 / 180)Internal Selectable X-Over 90Hz or 120Hz)Volume Control DialDRIVERDriver: Two 10" woofers with 2.5" Voice Coilsselectable crossover point: optional 90Hz/120HzMax SPL: 124dBFlyable with optional flybarnputs: 1 XLROutputs: 1 XLR6th Order Bandpass Design(2) M20 Screw Pole Mount (Can be used vertically or horizontally)Grill: 1.2mm steelCabinet: plywood

Piggyback case for 4 pcs Qpro Audio P208 line array modules + flying framesuitable for QPRO Audio P208 (same as NOVA P9) 4in1 staked (zero position) + flying frame9mm birch plywood phenolic brown30x30mm aluminum edge10x butterfly medium 14mm spring loaded8x folding handle medium spring-loaded 8mm bowl8x ball corner large4x L corner large six holesat least 1cm foam4x 100 swivel castors (2x braked, 2x unbraked)

B-Series loudspeakers are uncompromising subwoofers, using the latest speaker technologies with extended cooling systems to lower the power compression. The extended controlled Xmax allows the distortion free and impressive reproduction of low and ultra low frequencies.The double flared ventilation port is designed as a highly efficient waveguide, which reduces airflow noise down to a minimum.The matrix cabinet design is a stiff and stable wooden cabinet enclosure, which can reduce resonances highly efficient. The cabinets are constructed from plywood and covered with weather and impact protecting polyurea coating.The front of the B-Series subwoofers are protected by an air flow optimized metal front grill with acoustically transparent foam. With two additional Speakon connectors on the front it is easy to use the subwoofers also in cardioid setups.Ideal to use where very high SPL, clear and deep subwoofer performance is needed. The B-Series subwoofers are compatible with all M-Series and P-Series loudspeakers. B 12 and B 18 can be flown with an optional flyware kit which also allows the conntection to all M-Series and P-Series loudspeakers.Weatherproof cabinet IP54 Loudspeakers with 4" VCHigh performance FE and ND loudspeakersPatented voice coil cooling system Airflow optimized front grill Double flared ventilation ports Very high program power Outstanding performance with very high SPL Up to 144 dB SPLmax Matrix cabinet construction Up to 29 mm Xmax 2 x Speakon on front for cardioid setups Polyurea coating Ergonomie grip handles Optional Speakon protection coverTechnical specifications:System: 2x 18" SubwooferFrequency range (-10 dB): 27 Hz - 300 HzCover pattern HxV: omni / CardioidCrossover frequency: -----Rated power (AES / program): 3200W / 6400WMaximum sound pressure: 144 dB SPLSystem sensitivity (1 W / 1 m): 103 dB SPLNominal impedance: 4 ohmsSpeakers: 2x 18" Beyma custom MadeEnclosure: 15mm, birch plywoodSuspension / assembly: 2x M20Finished: Black polyurea couting, IP 54Grid: powder coated, black perforated steel with acoustic cloth insideInput connectors: 2x Speakon NL4, 2x Speakon NL4 front 2 + / 2- 1 + / 1- to TOPDimensions (W x H x D): 1200 mm x 590 mm x 700 mmNet weight: 80 kgOptional accessories: Speakon protection cover

The M802 line array module features a dipolar arrangement with two 8" neodymium transducers and a high precision 1.4" HF compression driver mounted onto a waveguide with 90° x 12° dispersion. Both 8" transducers feature an extremely stiff UPM (Ultra Precision Membrane) carbon membrane design, which raises the particial oscillation to an inaccessible frequency range and reduces distortion to a minimum. The superior membrane damping is increased to a maximum, while natural oscillation is lowered to a smallest value. The UPM design further enables for increased speaker power capability of 500 W (RMS) for each single transducer. The P208 loudspeaker cabinet includes a passive 2-way crossover, which ensures for high efficiency in system cabling and amplifier configurations. The advanced bass-reflex ports eliminate side lobes, which usually occur with 2-way line array systems. The ground-breaking ECD design (Extended Coverage Design) ensures for a very precise mid-range coverage. The V-arrangement of the two 8" transducers and the two additional outlets at the sides extend the horizontal dispersion of 90° at the typically critical frequency range between 700 Hz and 1.100 Hz. The vertical coverage of 12° allows for a basic system setup with four cabinets only. The acoustical and mechanical design enables vertical arrays of up to twentyfour M802 modules. The verticals splay angles are adjustable from 0° to 12° in steps of 1.5°. The cabinet is constructed from marine plywood and is covered with weather and impact protecting NPP (QPRO Polyurea Protection) finish. The front of the loudspeaker is protected by a robust metal front grill with acoustically transparent foam. Each side includes one handle while two additional handles are included at the rear. The integrated three-point rigging hardware is recessed into the cabinet enclosure. The SLS (Splay Lock System) rigging technology makes splay adjustment to a walkover in two steps only, configuration and locking. The M802 loudspeaker can be used for a wide range of applications, such as for stadiums, theatres, dance clubs, festivals, corporate events and churches.QPRO SLS Rigging Technology (Splay Lock System)Rigging as easy as it could be. Open the touring cart, pre-select each splay angle, lift the array and lock the rigging system.ECD (Extended Coverage Design)Two additional outlets at the sides extend the horizontal dispersion of 90° and ensure for a very precise mid-range coverage.Frequency Range (-10dB) 66Hz - 20KHzFrequency Response (+/- 3dB) 75Hz - 18KHzCoverage Pattern 90° x 12°HF Horn Planar Wave HornCrossover Modes PassiveCrossover Frequency 1 KHzPower Handling 1.000 W / 4.000 W(AES / Peak 10 ms)Maximum Peak SPL* 136 dBSystem Sensitivity (1W/1m) 100 dBLF Drivers 2 x custom made 8" Beyma© Carbon Neodymium Speaker, 2.5" VCHF Driver 1 x custom made 1.4" B&C© Neodymium Comp. Driver, 4" VCNom. System Impedance 8 OhmsEnclosure 15/21 mm Birch PlywoodRigging SLS Rigging System with Splay angle 0°-12° (1.5° steps)Transport 4 integrated handlesFinish Black NPP PolyUrea coatingGrille Powder coated, black, perforated steel with acoustic transparent charcoal foam backingInput Connectors 2 x Neutrik© Speakon© NL4, 1+/1- , 2+/2- LoopDimensions (WxHxD) 590 mm x 253 mm x 370 mmWeight 21.5 kg (47.4 lbs)