ÖLFLEX. LIFT F are cold flexible PVC flat cables for flexible use under medium mechanical load conditions. They are amongothers designed for use in dry, damp and wet rooms. Outdoor is use temporarily possible, considering the temperaturerange. At room temperature they are widely resistant to certain oils and resistant to acids. Continuous operational movements,restricted guidance, usage of these cables in moving cable carriers or on motor drum guidance or under a tensilestrain of more than 15 N / mm² is not allowed.Application range: Conveyor and hoist equipments, transport installations, supply lines for moving machine parts, indoorcranes, high rack facilitiescan be used as elevator control cable up to 35 m suspension length with a maximum travel speed of 1.6 m / secDesign:based on DIN EN 50214 resp. VDE 0283-2Conductor: acc. to IEC 60228 resp. VDE 02951,0 mm2: fine wire strands of bare copper, class 51,5 - 6 mm2: extra fine wire strands of bare copper, class 6. 10 mm2: fine wire strands of bare copper , class 5Core insulation: PVC-compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3Core identification acc. to VDE 0293-1, with or without GN/YE ground conductorup to 5 cores coloured in acc. to DIN VDE 0293-308starting at 6 cores: Black cores with white numbersacc. to DIN EN 50334 resp. VDE 0293-334Outer sheath: up to 1,0 mm2:PVC-compound TM2 acc. DIN EN 50363-4-1 resp. 0207-363-4-1starting at 1,5 mm2:PVC compound TM4 (cold flexible) acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1Colour: black, similar RAL 9005Electrical properties:Nominal voltage:up to 1,0 mm²: U 0/U 300/500 Vstarting at 1,5 mm²: U 0/U 450/750 VTest voltage: 3000 V ACMechanical and thermal properties:Min. bending radius: flexing: 10 x cable thicknessTemperature range:up to 1,0 mm²:flexing: 0 °C up to +70 °C max. conductor temp.starting at 1,5 mm²:flexing: -15 °C up to +70 °C max. conductor temp.Flammability:flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2Tests: acc. to EN 50395, EN 50396EC directive:This cable is conform to ECDirectives 2006/95/EC (Low Voltage Directive),ECD 2002/95/EC and 2011/65/EU (RoHS, Restriction of the use of certainhazardous substances).

SOMMER CABLE - SC-MONOLITH Compact, AES/EBUpower 3 x 1,5 mm² + DMX 110 Ohm , 2 x 0,14 mm² d= 9,5mm

SOMMER CABLE - SC-MONOLITH Compact, AES/EBUpower 3 x 1,5 mm² + DMX 110 Ohm , 2 x 0,25 mm² d= 12,4mm

max. 3600 W, 16A, 250V, H05 VV-F3G1 mm² 1,4 m

3-fold-multiple socket outlet black 3-fold distributor with 1,4 m cable H05VV 3 G1,5 mm² and angled plugplasting housingwith integrated child protectionriveted version design of electrical sockets 45°

3 pin XLR + powercon combo link cable. To be used to link power and data for fixtures that include 3 pin XLR and powercon connectors.- Lenght : 3m- 1 Powercon 3x2.5mm Blue + 1 x DMX 3P Female- 1 Powercon 3x2,5mm Grey + 1 x DMX 3P Male

Extension line 15m, 250V 16A, 3x1.5mm² The very extension cable for the entertainment industryHeavy rubber coating with rubber safety plug and connector H07RN quality for permanent outdoor use 250 V/16 A with 3x 1.5 mm² required cross-section Not comparable with do-it-yourself providers

This cable is ideal to built up a contolling or connecting line. The line is used in dry, wettish or wet rooms on normal mechanical use. In cause of longtime outside useage you will need an UV protection, flame retardant line IEC 332.1, PVC-cladding: gray

Gummileitung 5 x 35mm²

The TRU1PCOA is a 1ft/30cm, 12AWG, IP20 rated powerCON TRUE1 to standard powerCON output power adapter. This adapter was designed for production use and for those who already own standard powerCON cables and extensions who aren't ready to invest into powerCON TRUE1 cables and extensions. The TRU1PCOA adapter can be used at your fixtures power output side while using your standard powerCON cables for all other power connections. The TRU1PCOA consists of (1) Male powerCON TRUE1 (Neutrik NAC3MX-W), (1) White powerCON (Neutrik NAC3MPB-1) cable mount connector and a clear heat shrinkable sleeve so each unit can labeled. The powerCON TRUE1 is a locking connector with breaking capacity (CBC), i.e. it can be connected or disconnected under live load. The standard powerCON is a connector without breaking capacity, i.e. the standard powerCON should not be connected or disconnected under load or live!Specifications 1ft/30cm long end to end12AWG cableOriginal Neutrik branded connectorsIP2020A @120VAC; 16A @250VACEasy and reliable twist lock systemExtremely robust and durableUL recognized components

3 pin XLR + powercon combo link cable. To be used to link power and data for fixtures that include 3 pin XLR and powercon connectors.- Lenght : 1,5m- 1 Powercon 3x2.5mm Blue + 1 x DMX 3P Female- 1 Powercon 3x2,5mm Grey + 1 x DMX 3P Male

3 pin XLR + powercon combo link cable. To be used to link power and data for fixtures that include 3 pin XLR and powercon connectors.- Lenght : 5m- 1 Powercon 3x2.5mm Blue + 1 x DMX 3P Female- 1 Powercon 3x2,5mm Grey + 1 x DMX 3P Male

Extension line 5m, 250V 16A, 3x1.5mm² The very extension cable for the entertainment industryHeavy rubber coating with rubber safety plug and connector H07RN quality for permanent outdoor use 250 V/16 A with 3x 1.5 mm² required cross-section Not comparable with do-it-yourself providers

Extension line 3 m, 250V 16A, 3x1.5mm²Heavy rubber coating with rubber safety plug and connectorH07RN quality for permanent outdoor use250 V/16 A with 3 x 1.5 mm² required cross-section

for LED effects, electric connectoreven for DTS FOG1000

7 sockets 250VAC 50/60Hz / 16A / 4000W Aluminium Profile Outputs by 35 ° Light switches - to prevent accidental turn off Includes 2 metal brackets / not adjustable 2m cable H05VV-F 3G1, 5mm ² Right angle plug with double earthing grounding

Mains splitter cable, Schuko - 2x C13, M/F, 1.7m, H05VV-F3G 1.0qmm/0.75qmm, blThis Y-Power cord used for the connection of two devices.Technical Details:Connector 1: Schuko (CEE 7/7), plugConnector 2: 2x C13, jackCable standard: H05 VV F3GUL certified: non ULCurrent load capacity: 250V/10AHoods: moldedShielding: UnshieldedLead cross-section: 1.0 / 0.75qmmWire material: CUColor cable: blackColor connector: blackConnector surface: nickel-platedLength: 1.7 m

The Huckebag FRM70 is suitable for events as a cable protection mat or trip protection, protective mat on shelves, in vehicle construction, as a workbench cover, on the tool shelf of tool trolleys and as an insert in drawers and tool boxes to protect tools (tool mat). Finely grooved mats are also often used to cover shelves to protect the goods stored there from damage during storage. The mat provides a very non-slip and shock-insulating surface. - Surface: Narrow longitudinal grooves - Underside: Patterned (for slip resistance and better adhesion), lying flat - Non-slip, elastic covering for all indoor and outdoor tread areas (weatherproof) - Easy to cut - NK/SBR quality, styrene butadiene rubber (SBR) Colours: black Roll weight: 20 kg

The Huckebag FRM100 is suitable for events as a cable protection mat or trip protection, protective mat on shelves, in vehicle construction, as a workbench cover, on the tool shelf of tool trolleys and as an insert in drawers and tool boxes to protect tools (tool mat). Finely grooved mats are also often used to cover shelves to protect the goods stored there from damage during storage. The mat provides a very non-slip and shock-insulating surface. - Surface: Narrow longitudinal grooves - Underside: Patterned (for slip resistance and better adhesion), lying flat - Non-slip, elastic covering for all indoor and outdoor tread areas (weatherproof) - Easy to cut - NK/SBR quality, styrene butadiene rubber (SBR) Colours: black Roll weight: 28 kg

Thanks to the use of cross-linked special elastomer mixtures in the core insulation and the outer sheath, TITANEX® rubber sheathed cables impress with their extreme flexibility and suppleness, despite the highest mechanical and thermal resilience. They are UV and ozone resistant and are particularly suitable for permanent outdoor installation. According to DIN VDE 0298-300 (HD 516 S2), these H07RN-F rubber hose lines for heavy loads may also be briefly immersed in water.Number of cores x conductor cross-section: 5G2.5Outer Ø: 17.0 mmCable color: blackCopper weight: 120 g/mWeight: 0.3kg/mconstructionConductor structure: bare copper strands, finely stranded according to IEC 60228, class 5insulation: specially cross-linked elastomer EI4 according to DIN VDE 0281-1 (HD22.1)core identification:5 cores: green-yellow, brown, blue, black and greyOuter jacket: cross-linked elastomer with high mechanical strength propertiesmechanicsminimum bending radius:routed: 3x outer diametermobile operation: 6x outer diametertemperature range:installed: -60°C / +85°Cmobile operation: -25°C / +65°COzone resistance of the insulating sleeve: according to EN 60811-2-1 art. 8thoil-resistant: according to EN 60811-2-1electricsrated voltage [Uo/U]: 450/750 V600/1000 V with protected and fixed installationtest voltage: 2500 V

Built with NEUTRIK connectorMade in Europe1 x power cordTECHNICAL SPECIFICATIONSCable construction: 3 x 1,5 mm² H07RN-FCable length: 3 mPlug A: 1 x safety plug (M)Plug B: 1 x PowerCON (blue)Use of brands: Built with NEUTRIK connectorColor: BlackWeight: 500 g